Zna 50 mod?

[Jim Beam]

Hi, just made another impulse buy, usely I do my research first lol. Anyhow are these worth having?
Got a modest collection going on mods and tanks already.
Looking to use this for my Orchid and 454 bigblock.

Really like the firing button and easily change batteries.

The Cloupor ZNA 50 is a sleek, portable variable mod that gives you the best vaping experience around!
With a DNA 50w chip this atomizer will read your atomizer's resistance and select the appropriate voltage, allowing you to control the wattage to your vaping needs.
The OLED screen has a clear display of battery life and atomizer size, along with a stealth mode to turn the screen off but still vape.
This mod comes with 18500 and 18650 battery tubes, along with extra connection pins and a gold plated firing spring for optimal connection. If you're looking for power, customizability, and portability look no further than the ZNA 50.
Product Features:

• 50w DNA chip
• 7-50w Power Output
• 3.6-8.5v Voltage Output
• Gold Plated Connection Pins and Firing Spring
• 18500/18650 Stainless Steel battery tubes
• Reverse Battery Protection
• Compatible with .3-3.3 OHMs 510 atomizers

Package Includes:

• 1x Cloupor ZNA 50 Variable Mod
• 3x Connection Pins, 1x Pin Tool
• 1x 18500 and 1x18650 Battery Tubes
• Instruction guide

Click 5 times on/off.

Jim

 

[Jim Beam]

https://www.youtube.com/watch?v=VdqjqltdGHI nice reviews on it.

 

[roxynoodle]

I haven't really kept up on that one, but don't recall any complaints . I have a Wotofo 30W, which I've had over 6 months.

 

[Thrasher]

I can't speak for the quality of the clone, but not too many people complain about Zen's products. Ol Zens a legend, nice guy too, looks like Santa lol

 

[Jim Beam]

Good morning. Did a youtube search last night and seem to get good reviews.
Though I didnt even know that it was a clone lol.
Just knew that I'd liked the looks and functions of it.
I have sigelei and a ipv mini2 and a few mech mods.
Just wanted to try something else out.
Not like I'd paid that much for it.

Thanks for your replies.


Jim

 

[Tagi]

The ZNA is in my opinion one of the best looking regulated mods. It keeps the simple and elegant look of a sterile mech but adds regulation. I really would like a DNA 40 ZNA but they are not made.

I might one day get one and transplant a DNA 40 board into it.

One with the vapor shark zip charger built in... a man can dream

 

[Thrasher]

Wanna see what ZEN makes? He is not wallet friendly lol, a true master of machining though

houseofhybrids.com/
Everything is hand made by him

 

[KenD]

I have two of the Cloupor ZNA50s and they're great. Only thing is that you really need to use an 18650 if you want to use up to 50w and get half decent battery life. One of mine also has a problem with autofiring if I screw on the top cap fully (and I also messed up the screen a bit when taking it apart). It has been dropped quite a lot though (almost daily it seems. Can't seem to avoid knocking my mods of the table for some reason).

 

[Jim Beam]

Good morning, hope that you all have a great easter weekend.

Thanks again for you guys replies.

Im looking to use 28g coil wire builds in a Orchid v4.

24g in my 454 bigblock.

Any suggested builds?

Just curious, Orchid new to me and wondering what coil build works best.

See videos on how to wick it properly.

Jim

 

[v1k1ng1001]

I think this clone will be disappointing relative to your Sig and IPV. Hopefully I'm wrong. Good luck.

 

[roxynoodle]

HoH will transplant a real Evolv chip into your ZNA clone for you. I think they charge $100. It won't be 50W, but its a nice service for those who want it.

 

[Tagi]

Good morning, hope that you all have a great easter weekend.

Thanks again for you guys replies.

Im looking to use 28g coil wire builds in a Orchid v4.

24g in my 454 bigblock.

Any suggested builds?

Just curious, Orchid new to me and wondering what coil build works best.

See videos on how to wick it properly.

Jim

Not sure on the orchid. Try a standard contact coil. I have never liked any tank other than the subtank with OCC coils. I can taste when the wick is not at full saturation. The rebuildable tanks for me always stay just saturated enough to have this taste.

On the 454 I like a .2 -.3 contact coil using a 7\64 bit. (adjust the ohms to your preferred level) I get the best wicking\vapor production using the 7\64 bit.


plug in your wire, resistance and coil diameter and this will keep you close to the resistance you want.

Coil wrapping | Steam Engine | free vaping calculators

 

[Thrasher]

HoH will transplant a real Evolv chip into your ZNA clone for you. I think they charge $100. It won't be 50W, but its a nice service for those who want it.

Just goes to show the designers aren't hating on clones as much as people like to argue about.

 

[Jim Beam]

Bought some more goodies earlier, cant hardly wait to get things going.

will keep u guy updated with the ZNA thingy.

jim

 

[Thrasher]

Cool, have fun man!

 

[Jim Beam]

Thanks Tagi, will keep that in mind.
I'd seen a video yesterday on youtube.
Wasnt the clone zna, it was about the real zna.
The video shown where juice ran down and got into the firing button.
Also work its way into the chip and caused it to fry.
It left burn marks on the ss tube.
Needless to say the mod no loner works.
Ziggy rep wants him to send the dna back so that they can look at it.
Video says enough, do know that I will be careful with my clone once it gets here.

Jim

 

[Jim Beam]

Hi all, it came in today and all I can say its nice and hit better than my other mods.
Love the firing button and changing batteries is great.
No need to remove screws.
Lcd is nice, buttons work great.
Very user friendly device.
Now, hope it hold up to heavy use.

Jim

 

[Jim Beam]

Here a lot of info and picture on my ZNA. Tried all my atomizers etc and vapes greats.

VV/VW model zna 50 50w MOD 1:1 clone mod cloupor zna50 mod clone wholesale zna50, View zna 50, zna 50 Product Details from Shenzhen Kangxin Technology Co., Ltd. on Alibaba.com


Jim