I keep getting this constant burnt taste. I've tried everything. I've changed the battery, clearomiser, coil and liquid and still getting this burnt taste. My only theory behind it is that the voltage is too high. Any suggestions? I'm using a 1.8 Ohms GS H2 clearomiser with a 1100 Mah EGO Evod battery.
Need some HELP! Constant burnt taste
- Thread starter JACKSTOKE
- Start date
- th_trl_thread_readers 0
- Status
You really shouldn't be getting a burnt taste because your battery isn't really putting out enough voltage to do so. The juice can burn and that is the benefit of using variable. Sometimes, just because the coil will handle it doesn't always mean that the juice will. However, once you burn the juice, if you take it out and re-use it; it can leach into juice that isn't.
You could have a wicking issue as well. If the juice is too thick to get to the wick, it will burn. Are you using stock coils or are you re-building/re-wicking?
You could have a wicking issue as well. If the juice is too thick to get to the wick, it will burn. Are you using stock coils or are you re-building/re-wicking?
Jack - how many GS-H2s have you owned?
I have heard stories of people ordering many (from China, direct) and finding not one of them works.
It's one of the cheapest clearos on the market at £1.22. No surprise really.
Some people have got lucky...but not most. Where did you buy it? Do you know how to rebuild it?
1.8ohms can be touch and go on a fresh battery, but it's not a problem I've had for over a year now.
I have heard stories of people ordering many (from China, direct) and finding not one of them works.
It's one of the cheapest clearos on the market at £1.22. No surprise really.
Some people have got lucky...but not most. Where did you buy it? Do you know how to rebuild it?
1.8ohms can be touch and go on a fresh battery, but it's not a problem I've had for over a year now.
I'd say cheap wicks. I can max out my Vamo to 6v with no problems whatsoever.
I'd also suggest that you avoid KangerTech unless you re-wick. Stock silica wick from them is awful
I'd also suggest that you avoid KangerTech unless you re-wick. Stock silica wick from them is awful
Do you have a way to check the resistance to make sure it really is 1.8 ohms? It probably really isn't even thought it's supposed to be.
If you don't have a variable voltage or variable wattage battery/device, there's nothing you can do to adjust to a resistance that's too low. Unless, of course, you want to take it apart and wrap your own coil.
If you don't have a variable voltage or variable wattage battery/device, there's nothing you can do to adjust to a resistance that's too low. Unless, of course, you want to take it apart and wrap your own coil.
The GS-H2 is supposed to take EVOD replacement heads. Try these: Kanger ProTank & Evod Coil Replacement **5 Pack - 2.2 ohms.
- Status
Similar threads
