New HV and LR 306 atomizers from ikenvape.com

Status
Not open for further replies.

Iken

Unregistered Supplier
ECF Veteran
Jan 23, 2009
7,011
4,882
PA,USA
I can't believe no one else asked you to elaborate on this...please do?
Well, there's an awfully familiar face! Hello GotLogo! It's nice to see you posting! err for the past 3 days :blush: I been tangled in testing project chameleon with a ton of cad drawings and new developments. These are not seen on the site as my good man Switcher can't be ever more right how i feel about new products being ran through first. We're all a solid family/team. If it gets the thumbs up, they'll be available. Now on to this what I think is a magnificent cartomizer, (i have been proven wrong though :D) it will indeed set new standards in our lovely community and is a great step forward in our accelerated vaping habits. All I can say is, you'll see :)
Yes, the new premiums came out nice by the consensus, but not personally speaking. They could use work in thier soaking abilities.
[/QUOTE]

For some reason my HV306 is metering at 1.6 ohms......did i get a weird one? I thought something was strange because it was burning hot...now it makes sense.....

update:
Just checked the other one i bought it meters at 3.6...i guess i got a weird one.

But aren't his LR's ~2.0 ohms? this one was around 1.6...

So what are your top 3??? I gotta know now :)
Whoa! Yes, Please shoot me an email and we'll get this squared away. What you have is an LR atomizer that was labeled incorrectly by the manufacture. Our 2.0 atomizers are truly ordered as 1.8ohm. Since there is always a ↨.2 difference, sometimes they can come out as 1.6 being the absolute minimum, as rare as this is because I work closely with the engineers, we normally reach a steady stream of 1.9-2.0 making only a ↨.01 difference. Your more than welcome to try out the 306 on a 3.7V device to see if you equally enjoy it as the 3.5, unless it has gotten too charred, just send me an email and I'll take care of you.
 

Geoff_NYC

Senior Member
ECF Veteran
Verified Member
Aug 7, 2010
294
14
New York City
Whoa! Yes, Please shoot me an email and we'll get this squared away. What you have is an LR atomizer that was labeled incorrectly by the manufacture. Our 2.0 atomizers are truly ordered as 1.8ohm. Since there is always a ↨.2 difference, sometimes they can come out as 1.6 being the absolute minimum, as rare as this is because I work closely with the engineers, we normally reach a steady stream of 1.9-2.0 making only a ↨.01 difference. Your more than welcome to try out the 306 on a 3.7V device to see if you equally enjoy it as the 3.5, unless it has gotten too charred, just send me an email and I'll take care of you.

Cool....i suppose i'll just use it as an extra LR when i need it....tnks for the followup!
 

dannoman

Unregistered Supplier
ECF Veteran
Oct 22, 2010
6,896
12,330
Sugar Land, Texas USA
Well, there's an awfully familiar face! Hello GotLogo! It's nice to see you posting! err for the past 3 days :blush: I been tangled in testing project chameleon with a ton of cad drawings and new developments. These are not seen on the site as my good man Switcher can't be ever more right how i feel about new products being ran through first. We're all a solid family/team. If it gets the thumbs up, they'll be available. Now on to this what I think is a magnificent cartomizer, (i have been proven wrong though :D) it will indeed set new standards in our lovely community and is a great step forward in our accelerated vaping habits. All I can say is, you'll see :)
Yes, the new premiums came out nice by the consensus, but not personally speaking. They could use work in thier soaking abilities.


Project Chameleon eh? :) I'll wait patiently...
 

Iken

Unregistered Supplier
ECF Veteran
Jan 23, 2009
7,011
4,882
PA,USA
Wow..so Isaac just emailed me to followup with my atty issue. Wow...what amazing customer support...Just placed another order with him :)
Thank you Geoff! No one gets left without good buddy!
Project Chameleon eh? :) I'll wait patiently...
Yes sir! It's been on going since August. Really hoping to make it by Xmas, at first I was told we would have a September launch, but it was being too hasty. In the Stock update thread, you can find a photo of the prototype, but due to coming to close for comfort of matching another design and in respect to another supplier(s) we revamped the unit. So what you will see in the thread is what once was.
Running the 306 HV on 6.5V, GREAT!!!!!!!

Rock on Monty!
 

Switched

ECF Guru
ECF Veteran
Feb 18, 2010
10,144
2,544
Dartmouth, NS Canada
hey i have a hv 306 that is reading 3 ohms
im using it on my bottom feeder and im wondering what voltage is optimal for it cause i cant seem to find it , i thought they were supposed to be 3.5 but this one says 3

Depending how much heat and longevity you are after. The 3Ohm is perfect for 5V and 3.5Ohm is perfect at 6V, for me anyway. I like vaping around 8 watts. Otherwise you are vaping at 10W loaded and 12W unloaded.
 

wood

Ultra Member
ECF Veteran
Verified Member
Sep 12, 2010
1,763
502
39
edmonton
i see i find im liking it lower like 4.2 4.5 is there any harm in under powering the atty or will it just last longer

i dont know ever since i got my new vv mod im finding i like lower volts i will be puffing on a lr 306 and just fiddle with the dial till i like the way it hits then out of curiosity i check and im at like 2.9 3.1 v but on my vv it feels like its hitting harder than my ego
 

Switched

ECF Guru
ECF Veteran
Feb 18, 2010
10,144
2,544
Dartmouth, NS Canada
i see i find im liking it lower like 4.2 4.5 is there any harm in under powering the atty or will it just last longer
Nope! vaping around 6.8W that may very well be the sweet spot for that liquid. Higher volts/watts does not necessarily = better. Many folks will tell you different but is is not necessarily so.

i dont know ever since i got my new vv mod im finding i like lower volts i will be puffing on a lr 306 and just fiddle with the dial till i like the way it hits then out of curiosity i check and im at like 2.9 3.1 v but on my vv it feels like its hitting harder than my ego
That's because it is receiving the proper current. The eGo cannot support the current requirement of a LR atty IMO.

But here is one for you. An eGo batt will hit harder than a 3.7V batt using a standard resistored atty.
 

Iken

Unregistered Supplier
ECF Veteran
Jan 23, 2009
7,011
4,882
PA,USA
any idea when the HV 306's are gonna be back in stock?

Sorry for the tardiness JD,
We sorta milked the weekend :laugh: No, when I'm on to something, I pretty much make it my world for it to be obtained. Being highly compulsive doesn't help as we're Home shopping.
Customer service just got back as the factory workers are coming back soon give or take 4 days in reflection of the New Year.
 

Iken

Unregistered Supplier
ECF Veteran
Jan 23, 2009
7,011
4,882
PA,USA
Switcher, it's the above posts and others like that, that make you the vaping guru legend of vaping in general. From studying and breaking batteries to atomizer and cartomizer alike dissections of liquid break down to mastering the e-liquid elements themselves!
Your proving to be a true Jack of trades because this .308 Caliber shows true skill as you can even say it's precisely shaped like an authentic bullet and stays on point from a hip. :lol: :vapor:
 
Status
Not open for further replies.

Users who are viewing this thread