The Lemo RTA: A Build With Pics

VaPreis;14101629 said:

Recently purchased the eleaf Lemo rta and thought I'd share a build on this fantastic rta.

Here is a couple pics for comparison's sake to a KFL clone base.



Lemo on the left, you can see that the center air hole is more then double the size of a Kayfun. The build deck is much larger as well. The base has 4 air holes spaced 90 degrees apart.

It is important to note that the Lemo is 23mm! Fine on my Cloupor box, but will overhang a bit on a 22mm mech.



Lemo on the left again, a comparison of the decks and chimney. The Lemo's chimney is huge.



This build is for use on my Cloupor 30 Watt box. It is 12 wraps of 26ga Kanthal with an ID of 2.2mm for just shy of 1.4Ω. Plenty of room on the deck for this huge coil. You can also see how deeply the liquid channels are cut in this pic.



Wicked with CVS Organic cotton ball. I prefer the cotton thicker through the coil, which for me, gives less popping and better flavor.



Bunny ear style, wicks positioned upward with chimney base installed.



Tails tucked and ready to be primed.



A test fire at 25 watts.



A pic of the bottom with the lower base section removed. Fill port screw on the left. Some rubber plugs are included with the kit, which I have not tried yet for "tool less" filling. I have been using a syringe to fill it, but a needle bottle or even a plastic needle bottle would work fine. It easily holds 5 ml.

Air flow is adjusted by turning the ring around the center pin in either direction. A small screw driver is helpful for this. It seems to hold it's position fine, but obviously can't be adjusted "on the fly", seeing as the bottom base section must be removed and a tool is required.



Fully assembled on my Cloupor box and vaping nicely at 20 watts. Air flow through the Lemo is amazing, being even more open then my Fogger V4, which makes it great for larger coil/higher wattage builds. I have to dial the airflow down for my taste, even with this build. I prefer mouth to lung hits, just like how I smoked, but air flow is big enough through it wide open to lung hit it. Flavor with the Lemo is sharper then my Kayfun and Taifun GT, and rivals that of my Expromizer which was my previous favorite. The Lemo's airflow spanks the Expromizer.

I did make one minor modification to it, and that was to add a small o-ring underneath the adjustable positive pin on the lower section of the base. When the adjustable pin is loosened, it moves fairly easily and I found myself having to re-adjust when re-mounting it on the Cloupor box. The o-ring helped hold the adjustment where I wanted it and can now screw it back on the Cloupor without having to adjust the pin every time.

I purchased the Lemo from Vaper Company for $33.95 with free shipping. I'll be purchasing another.

EDIT: The drip tip pictured in the last photo did not come with the Lemo. While the included drip tip worked just fine, I prefer this one for look and feel.

Click to expand...