These tests below only note my personal opinion for the ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, EVE, Ampace, Sinowatt, Lishen, BAK, or Sanyo can change at any time! This can be one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. Never use them outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous discharge rating (CDR), never let it get colder than 0°C or hotter than 60°C to help lower the risks and extend cell life, and keep the plastic wrap and top insulating ring in perfect condition. Never use a battery that is physically damaged in any way.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
This is a very good performing cell. But like all other ultra-high capacity cells you will not see any extra run time unless you are at a couple of amps or lower. Their internal resistance causes too much voltage sag at higher current levels and that causes the cell to reach the low voltage cutoff sooner.

Some specs and observations…

• This cell is rated 3900mAh minimum and 4050mAh typical.
• It has a 10A continuous current rating, which seems reasonable, and a temp-limited 12.5A rating (stop at 60°C).
• At 5A the LT 19660 (Ampace JP30?) and EVE 35V run for a bit longer than this Vapcell N41. But probably not a noticeable difference though.
• At 5A and 10A the Vapcell N41 cell runs for about the same amount of time as the EVE 30P, Molicel P28A, Molicel P30B, Murata VTC6, and Samsung 30Q6.
• As you can see, the N41’s higher capacity rating really only makes a difference at very low current levels. But if you are only drawing a couple of amps this is a top cell to consider using. At 5A it’s still a very good performer.
• The standard charge rating is 1.5A and the max is 2.5A. I recommend staying below 1.5A. Charging at 1A would be good for longer cycle life.
• The two cells I tested delivered 3963mAh and 3971mAh. This is fantastic consistency and exceeds the 3900mAh minimum spec. But neither cell reached the 4050mAh typical spec.
• DC internal resistance was 34.6mOhms and 36.9mOhms for both cells. Not very good consistency but I didn’t see any real difference in their performance at 5A and 10A.
• Like many ultra-high capacity cells, the N41 has a very low max temperature limit of 60°C. This is easily reached in a wrapped up battery pack or if you’re running a single cell hard. Do not allow the cell to go over 60°C.

Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic



18650 Ratings & Performance Table:


21700 Ratings & Performance Table:

I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Get more from Battery Mooch on Patreon.

Hello Guys!

Welcome to my site, today I bring you a comparison of the Voopoo ARGUS G3 Mini and the ARGUS G2 Mini basis my own experiences.

The two devices were introduced by Voopoo in a short time span - both as a simpler version to their more enhanced brothers: the ARGUS G3 Mini just came out, while the ARGUS G2 Mini was released a few months back. They were delivered about the same time to me. Voopoo keeps innovating, improving and overwhelms the market continously with new gadgets! Not a secret that 80% of the devices I own and kept using in daily rotation are all from Voopoo. Their devices, coils and pods have proven me steady quality and non-compromising vaping experience throughout the years!

Since there are many reviews already for both devices, I decided to compare the two side-by-side to help you deciding which one to choose.

Both devices are well built, classy and easy to use (auto-draw only) yet affordable, intended for those who are planning to transition from cigarettes or disposables or for the seasoned vapers who want a light, portable yet stylish vape for on-the-go. You can already try the flavour of vaping for the price of a box of cigarettes or a 600-puff disposable - go for it, you won’t regret with either of the devices!

The G2 Mini I got from Voopoo’s official website with their lucky bag for just $7.25 with their additional 20% discount. The G3 Mini I have won from Voopoo on their Giveaway here at E-Cigarette Forum – thanks for it!

I tested both devices for a month long and decided to take these two on our recent holiday to Paris. I gave them massive hits in the car, in the hotel and during the sightseeings in the warm weather we had luckily. Both devices satisfied my cravings decently.



Colour and design:

• G2 Mini: Red-violet, rounded edges, smooth touch and feel, I like the beautiful faded matte finish. While it is not a manly colour and it is more pink than red, I paired it with a passing 20mg Blueberry nic salt and I don’t mind vaping it in public. I like to use colour coding for my flavours as I can easily differentiate them when owning several vapes. The device has a trendy blue-green LED at the bottom which lights up for short when you pull a draw. It reminds me of the old cigarette shaped cartridge vape-pens which had a red or blue LED at the top mimicking a real cigarette draw. You can disable this LED with 3 pulls when it is bothering you. I actually like it as it adds to the experience. This device is more intended for the younger folks though, I would say.
  
  
• G3 Mini: Grass green, sleek and tiny, engraved diamond like pattern at both sides, matte finish with stylish polished elements. It is a bright and unusual, summer colour which I paired with a 20 mg Watermelon nic salt. It has just one LED indicator and is more sophisticated and mature in design, in my view.

Battery performance:

• G2 Mini: 1200 mAh battery, 5-30W performance, USB-C charging port at the bottom, charging time ~1 hour.
  
  
• G3 Mini: 1350 mAh battery, 5-30W performance, USB-C charging port at the ‘right’ side, charging time a bit over 1 hour.

While neither of the two devices does support fast charging, their long and reliable operating time compensate massively for this short downtime. I get 2-3 days of chain vaping with both devices.

Both devices have a simple small LED indicator for the battery charge which either lights white when fully or optimally charged and changes red when it has drawn below 15-20%. I am lacking a 3rd state in between which would warn you that it has dropped below 30-40%.

And here comes the trouble..the G2 Mini’s LED indicator resides at the very bottom of the device, which you will either cover with your fingers or when vaped reversed with the airflow slide in access to your thumb - you won’t even notice this small LED. I had to learn which side is the ‘front’ of the device: the side with the airflow adjuster or the side with the ARGUS logo and the battery indicator? It has happened to me that the indicator turned red and the battery drained short after without even noticing it, luckily, I have always a spare vape with me. You can prevent this phenomenon when topping up the battery daily.

On the G3 Mini, Voopoo already oriented this battery LED indicator more to the top of the device which remains visible when vaping. Since this device has no airflow adjustment, just two small airflow inlets at both sides you can hold the device facing the ARGUS logo and seeing the LED. This is apparently the ‘front’ of the device.

Neither of the devices shine here. I would like to see the airflow adjuster at the side on both devices (the G3 Mini has no airflow adjustment) and a 3-stage battery indicator at a visible and straightforward location, since there is no display or fire button that would clearly indicate which is the user-facing side.



Size and weight:

• G2 Mini: 115 mm x 25.6 mm x 13.4 mm, 48 grams, made of aluminium alloy and PC.
  
  
• G3 Mini: 97.9 mm x 25.8 mm x 13.7 mm, 40.85 grams, made of aluminium alloy.

The G3 Mini has a slightly bigger battery capacity despite it is much smaller (~ 2cm) and lighter than his counter partner. The G3 Mini is very compact in weight and size, a winner here!




Pod/cartridge:

• G2 Mini: Argus ICOSM top-filling cartridge 0.7-ohm, 3 ml capacity, 30 days leak-proof, 90 ml refill.
  
  
• G3 Mini: new Argus ICOSM 2.0 top-filling cartridge 0.7-ohm, 3 ml capacity, 30 days leak-proof, 90 ml refill.

It is true that these pods last for a whole month – unbelievable, but I achieved it with both pods filled with sweet nic salt juices of the same brand (Elfiq)!

The v1 ARGUS pod in the G2 Mini started to leak a little bit at the end of the month indicating a change, yet it still gave me the same flavour and vapour until the very end! There was no burnt taste throughout.

The new v2 ARGUS pod in the G3 Mini uses aerospace-grade heat resistant gold cotton for leak-proof guarantee. It still goes on after a month of use with no compromise in flavour or vapour and no leaks or condensation whatsoever. Luckily, they are compatible through the whole ARGUS pod-mod line. The v2 cartridge is the winner for me!

The magnetic pod connections hold tightly on both devices and they both produce a decent MTL vape with a good throat hit, I like the G2 Mini in this regard as I can even tighten the airflow with the adjuster for a more restricted vape. The G3 Mini gives a stronger, higher wattage and warmer hit in my sense.



Final verdict:

The minimalistic yet stylish design, the bigger battery and the very compact size along with the new ARGUS v2 pod made me the ARGUS G3 Mini the winner!
But I will keep using the G2 Mini as well

The ‘Parisian Studs’ engraving makes this little vape a true jewellery and while vaping this at home the flavour keeps reminding me of the wonderful time we’ve spent in Paris. It was a real eye-cather over there!



Hope you liked my review; would you have any advices or questions don’t hesitate to connect with me.

Happy vaping folks!

Hello everyone, I am a new member. I need help with something. I use Bi2hop, do you know the size from deck orings (No13). Thank you.

Hello, today we are going to take a look at VINCI Spark 220 Kit sent to me by the online shop @sourcemore. I will examine in this Test each of the features that distinguish this item. I hope that at the end of this reading you will have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.

► VOOPOO VINCI Spark 220 Kit; Before starting, let's see together some special features indicated by the manufacturer:
• 1. Lightweight and compact; 30% lighter than normal box mods
• 2. Innovative design; full metal body with starlight animated coating
• 3. Dual 18650 external battery with 220W max
• 4. 5V/3A fast charging, easy-to-snap battery cover
• 5. Multifunctional wheel button for satisfying clicking
• 6. Power lock switch for worry-free carrying
• 7. 1.47" TFT screen, 2.4x display size, 4x screen resolution
• 8. 3 Setting modes: Smart/RBA/TC-TCR mode
• 9. 3 Different interface themes for your preference
• 10. Equipped with Uforce-X tank
• 11. Adjustable top airflow with optimal leak-proof design
• 12. Suitable for all PnP-X coils (Best) for 0.15/0.2/0.3Ω)



► VOOPOO VINCI Spark 220 Kit; Packaging:
The VINCI Spark 220 Kit is presented in an elegant cardboard package. The color of the kit shown on the front corresponds to that of the device contained. On the front, you will find a stylized image of the kit and the writings relating to the VOOPOO brand, the name of the device and the Gene TT chipset. On the back, the contents of the package, the address of Shenzhen Woody Vapes Technology Co., Ltd., the scratch & check, brands and logos, warnings, barcode. On the remaining sides, some of the main features, the barcode and the QR-Code are listed.





► VOOPOO VINCI Spark 220 Kit; Packing List:
• 1* VINCI Spark 220 Device
• 1* UFORCE-X TANK (PnPX) (5.5ml)
• 1* PnP X 0.15Ω Coil
• 1* PnP X 0.3Ω Coil
• 1* Glass Jar (6.5ml)
• 1* Silicone Rubber Pack
• 1* Type-C Cable
• 1* User Manual



► VOOPOO VINCI Spark220 Device Parameters:
• Material: Aluminum Alloy
• Output Power: 5-220W
• Screen: 1.47" TFT
• Multi-functional Wheel Button
• Magnetic Battery Cover
• Animated Starlight Coating with Ul Theme
• Three Setting Modes: Smart Mode, Rba Mode, Tc-trc Mode
• Temperature Control: 100-315°C (200-600°F) for Ni200
• Output Voltage: 3.2-4.2V
• Supported Resistance Range: 0.1-3.0Ω
• Battery: Dual 18650 (not included)
• Charging: Type-C 5V/3A

► UFORCE-X TANK (PnPX) Parameters:
• Capacity: 5.5mL/6.5mL (standard/USA), 2mL/3.5mL (TPD)
• Material: Stainless steel + glass tube
• Size: φ29*52.95mm/φ28.4*49.95mm (TPD)
• E-liquid Filling: Sliding Top Fill

• Kit Size: 148*45*29mm



► VOOPOO VINCI Spark 220 Kit; Available Colors:
• Space Blue
• Dark Red
• Starry Blue
• Spring Green
• Tech Silver
• Midnight Black
• Rose Red



► VOOPOO VINCI Spark 220 Kit; Introduction:
The bottom of the Vinci Spark 220 is mostly flat, apart from the slightly curved ends, with the “CE” and disposal logos silkscreened on the surface.
The good footprint keeps the device stable next to you on the table. The battery panel removal is via a fingernail slot, so gentle pressure is needed to remove it. At the top of the Vinci Spark 220 is a circular steel plate, slightly raised and centrally positioned. The gold-plated pin is spring-loaded and insulated with a silicone O-ring.



► VOOPOO VINCI Spark 220 Kit; Dual Battery 18650:
The inside of the removable cover has safety information printed on it and the recommendation to use good quality batteries equal to or greater than 25A. Two large rectangular magnets are positioned above and below the battery compartment and on the back of the removable panel ensuring a solid attachment to the Vinci Spark 220 body. The battery slots are marked “+” and “–“ for correct insertion. The nylon strap marked “Spark Your Life” makes it easy to remove the batteries.



► VOOPOO VINCI Spark 220 Kit; Lock Button and Rotary Multi-function Button:
There is a switch on the top left side of the Mod; when you flip the switch, the lock/unlock symbol will be displayed on the screen and a locked or unlocked padlock will also be displayed on the main display to indicate which operation has been performed. You can then choose whether to disable/enable the Fire button and rotary wattage adjustment simultaneously, or whether to disable/enable the rotary wattage adjustment only. At the bottom is the Type-C charging port which is specified as 5V/3A. To use the full speed charging, you will need a QC compatible charging module. There is a 14mm diameter rotary knob on the right side of the Mod that protrudes outwards and for this reason it may be subject to damage if dropped. To make it easier to grip while rotating, the knob is knurled around its diameter and in the center is the wording "Powered by Everest Lab". This multifunctional button can act as a Fire button to activate the device, it can adjust the wattage and allows you to access different functions in the menu.

WTB BP Mods Labs and Sure RTAs. Either color. Thank you!

Hey vape fam!
Get ready to treat your taste buds and your wallet—the National Donut Day Vape Sale at VapeSourcing is live from June 6 to June 8, 2025!

Whether you're into dessert flavors or looking for a new vape setup, now’s the perfect time to stock up with these mouthwatering deals:
$20 OFF orders over $99
$40 OFF orders over $169
FREE shipping on orders $95+
CODE: DONUT (Apply at checkout)

Don’t wait—these sweet savings only last from 6/6 to 6/8!
USA Warehouse only. Discounts apply post-coupon.

Whether you’re craving donut-flavored vape disposables or just want a new pod kit to pair with your morning coffee, this sale is your chance to score big.

Grab your favorite vape gear and flavors now:

Let us know what you’re picking up—any donut-flavored vapes worth trying?

Other kits you may prefer:
VOOPOO Argus Klyc Pod System Kit
Geekvape Z Fli 2 Sub Ohm Tank

Buy Now: Zen Haus E-Juice and Salt

Learn about the Zen Haus E-Juice Collection (120ml), a high-end range of fruit-infused vape juices designed to provide the smoothest possible experience and maximum flavor. With unique blends like Strawberry Lime and Mango Peach Guava, Zen Haus offers a strong, reviving flavor with each puff. Ideal for flavor lovers and vapers who want to vape all day.

Our Brands​

• 7 Daze
• Aqua
• Bad Drip Labs
• Jam Monster
• Badger Hill
• Air Factory
• Humble Juice Co.
• Cloud Nurdz
• Coastal Clouds
• Celsius
• MRKTPLCE
• Four Seasons and more.

The Lost Mary BM600 Prefilled Kit is the perfect next step for anyone who loves the classic BM600 disposable but wants something more sustainable. Keeping the same ultra-portable, matchbox-style design and bold, flavorful experience, this kit now features a rechargeable battery and replaceable prefilled pods—so you get the convenience of a disposable with the value of a reusable device.

Each prefilled pod kit comes with a 2ml pod filled with 20mg nicotine salt e-liquid, offering up to 600 puffs of smooth, satisfying mouth-to-lung (MTL) vaping. The inhale activation makes it incredibly simple—no buttons, no settings, just puff and enjoy. A status indicator light next to the USB-C charging port lets you know when it’s time to recharge, keeping things easy and fuss-free.

Whether you're just switching from cigarettes or you're a seasoned vaper looking for a reliable daily device, the BM600 Prefilled Pod Kit hits the sweet spot. It’s compact enough to slip into your pocket, stylish enough to stand out, and economical enough to skip the throwaway habit. Effortless, flavorful, and ready when you are.

Here at the vape store uk, we hope you will get your best flavor and start your wonderful vaping journey.

Cheap vapes sale:
pyne pod click 50k refill
vaporesso xros 5 sale

Time to treat yourself — and we’re not talking glazed or jelly-filled. From June 6 to June 8, our National Donut Day Vape Sale 2025 is serving up unbeatable savings for your vape stash. Get 19% off sitewide with code ND19, plus Free Shipping on orders $79+ (after discounts, USA Warehouse only).



Whether you're craving fruity, icy, or dessert-inspired clouds, this is the moment to stock up on your favorites or try something new. The Vape National Donut Day 2025 event is your excuse to grab those cheap disposable vapes online you've been eyeing — without breaking the bank.

Looking for premium quality with flavor to match? Our site is the best online vape shop for a reason. With hundreds of options and lightning-fast shipping, you’re guaranteed a smooth experience from cart to cloud.

Don’t miss these national donut day deals vape fans will be talking about all month long. No sprinkles required — just savings, flavor, and satisfaction.

Hit that checkout button while it lasts. Sale ends June 8 — then it's gone like the last bite of a frosted donut.

Quick view:
can you vape in a hotel room
lookah dragon egg e rig

If your vape setup looks like it belongs in a sci-fi movie but vapes like a relic — time to upgrade. VOOPOO Argus Klyc is sleek, stylish, and has the brains to back it up. Wrapped in durable aluminum alloy and powered by a beefy 1350mAh internal battery, this compact pod kit keeps things simple while delivering flavor like a pro.



Thanks to adaptive wattage up to 30W, this thing automatically adjusts output to match your coil — so whether you're puffing nic salt or freebase, you’re getting a smooth, consistent experience every time. No fiddling, no menus, just straight-up satisfaction.

And if you're hunting for the best pod system that nails flavor, performance, and durability — you’re looking at it. The upgraded iCOSM CODE 2.0 tech delivers 100ml of clean, long-lasting taste. Combine that with a top-fill, leak-resistant pod and you've got a 30-day clean streak that actually holds up.

Worried about hygiene? Don’t be. The magnetic cap snaps on to keep the mouthpiece clean and dust-free. Whether you’re on a hike, at a party, or just throwing it in your bag — this device keeps it classy. Compatible with the entire ARGUS pod family, it’s versatile too. One device, multiple options, no stress.

Grab the VOOPOO Argus Klyc Kit now at the cheapest online vape store, where great design meets unbeatable prices. If you're ready to vape smarter, this little legend’s already waiting for you.

Quick view:
olit hookalit pro 60k
50000 puff disposable vape

This thread is for the general discussion of the product SP2S SKY P Disposable Vape: Greater Power, More Puffs. Please add to the discussion here.

iVeni Duo, a new offering in the iVeni series launched today by Eleaf. After two versions that made compactness and ease of use their strong points, Eleaf has decided to return to its roots, introducing a novelty. With this Duo, Eleaf reintroduces the original iVeni, offering a pod with wattage adjustment, further simplified by a button. Novelties also concerning the Pods, with the new iVeni Duo enriching the iVeni Pod range. iVeni Duo offered free of charge by Eleaf, without receiving money or having employment relationships with them.



In terms of upgrades, the iVeni Duo also presents some novelties with its 1300 mAh battery, 200 mAh more than the first iVeni, and a sleeker line, losing some weight. The casing is still aluminum but is less massive than the first version and in line with the two "small" ones, weighing 55 grams. The dimensions are quite standard for pods with this form factor, 120 x 24 x 14 mm.



The box changes from black to white to underline the change but the presence of a scratch and check to guarantee originality remains unchanged. Inside, the iVeni Duo battery body, two iVeni Pods of 1.2 and 0.8 ohm, a substantial instruction manual, and a USB Type-C cable.



iVeni Duo Pod, unlike the first series, is available in 2 and 3 ml capacity and made of the same smoky PCTG. Refill is via a side plug, so there's no need to remove the iVeni Duo Pod from the battery body. iVeni Pod Duo is visually recognizable thanks to its green bottom, a color dear to Eleaf. Backward compatibility with "old" iVeni models is present, always keeping in mind their maximum wattage depending on the model where they are to be used.



It's also possible to mount normal iVeni Pods on the new iVeni Duo, provided, as specified by Eleaf, that they are used in Eco mode. Another modification is the significantly larger cotton windows to allow faster liquid wicking and prevent dry hits. A discovery of the iVeni Pod Duo is to exploit the double mesh section accompanied by what will be seen later as the two delivery modes of the iVeni called Eco and Power.



iVeni Duo 0.6Ω - Eco Mode 20 - 24 watts recommended 22 watts
iVeni Duo 0.6Ω - Power Mode 34 - 40 watts recommended 37 watts
iVeni Duo 0.8Ω - Eco Mode 14 - 18 watts recommended 16 watts
iVeni Duo 0.8Ω - Power Mode 26 - 30 watts recommended 28 watts
iVeni Duo 1.2Ω - Eco Mode 11 - 13 watts recommended 12 watts
iVeni Duo 1.2Ω - Power Mode 20 - 24 watts recommended 22 watts

The 1.2 and 0.8Ω are available in the package and I believe this is the "real" target of this iVeni Duo; I imagine another pod will arrive designed to exploit the 0.6 Ω. These below are instead the "original" series with a single mesh section, always compatible in Eco mode:

iVeni 0.4Ω - 28-40 watts - recommended 32 watts
iVeni 0.6Ω - 15/25 watts - recommended 22 watts
iVeni 0.8Ω - 13/20 watts - recommended 15 watts
iVeni 1.2Ω - 10/12 watts - recommended 11 watts



The substantial difference between Duo and normal is an even greater responsiveness, with increased vapor production as well as sweetness. Therefore, they are dedicated to creamy, fruity, and perhaps even some flavored tobacco. There's also a slight hint of throat hit even when vaping at 0 mg. When initializing the Duos, whatever method you use, give them more than the usual 5 minutes, especially the 0.6, despite its size, is an RDL pod and has cotton inside.



The slot for inserting the iVeni Pods remains similar to those of other pods, with the difference that the gold-plated movable pins for detecting the iVeni Pods are 3 and not two, but they don't create reading problems with normal ones. Laterally, the usual two magnetic plates allow the Pods not to slip out, and lastly, an automatic draw sensor.



Airflow control knob that remains identical to the one on the iVeni, with 3 holes that gradually increase in diameter. It goes from the single one designed for softer iVeni Pods to the 3 that should manage RDL ones. Therefore, the vaping target remains unchanged, from open MTL to RDL, even with the new iVeni Duo Pods.



A USB Type-C port is also installed on the bottom cap here to recharge the battery, which on the Duo reaches 1300 mAh. 2A charging is confirmed; depending on how drained the battery is when the cable is inserted, it takes just under an hour to reach 100%, and in an emergency, Eleaf says it reaches 80% charge in (about) 30 minutes.



The biggest novelty on this iVeni Duo is the chrome button, like the air selector, which several manufacturers have already experimented with on box mods, called the "Twist - Push Button." When pressed, it's used as a fire button or for circuit input, while rotating it in either direction transforms it into what on other pods are the + and - buttons for wattage selection. The "Color Screen" pays the price, remaining quite minimal despite its curious shape that follows the profile of the fire button.



The circuit, despite the screen size, allows for several functions:
5 clicks of the fire button to turn the iVeni Duo on or off
4 clicks of the fire button to lock or unlock firing via the fire button (automatic draw remains active)
3 clicks of the fire button to enter wattage selection mode
2 clicks of the fire button to change delivery mode (Eco / Power)

The battery level is checked via the 3 bars on the screen:
3 bars: 100-71% battery
2 bars: 70-31% battery
1 bar: 30-1% battery

Protections:
8-second firing cutoff
Low voltage/low battery if it drops below 3.0 volts during a puff or if it's below 3.3 volts while in standby
Short circuit protection and resistance range read between 3 and 0.3 Ω



The iVeni Duo Eleaf Pod is mainly focused on the new iVeni Duo pod offering, but it actually presents a significant upgrade with the battery body. 200 mAh is a nice increase. The new fire button, while rarely used for wattage selection, is much more agile than doing everything with a single button. iVeni Duo is valid for getting familiar with Eleaf pods, especially if you are users of these types of devices, given the range of pods that rivals some atomizers.

For more info, you can consult the dedicated iVeni Duo page on the Eleaf website: Eleaf iVeni Duo Pod Vape Kit - Eleaf Official Website

Thank you to the e-cigarette-forum staff and community for the platform, and to Eleaf for giving me the opportunity to try the iVeni Duo pod.

VOOPOO Argus Klyc Pod Kit

VOOPOO Argus Klyc Pod Kit is powered by a built-in 1350mAh battery with 30W max. It features precise airflow adjustment and draw-strength adaptive power to tailor your every puff. It applies icosm code 2.0 to bring you mess-free use, steady smoothness and long-lasting performance. The Argus Top Fill Cartridge V2 0.7 Ω is included in the package. Designed with magnetic dust-proof cap, it keeps dust out and ensures pure enjoyment.

Details:
1. Magnetic dust-proof cap, top/base attachable
2. Applies icosm code 2.0 for better vaping experience
3. Included Argus Top Fill Cartridge V2 0.7 Ω
4. 1350mAh battery with 30W max
5. Precise airflow adjustment
6. Draw-strength adaptive power




Gobar Skylin Pod Tornado Kit

Gobar Skylin Pod Tornado Vape Kit is a pod system device that comes with large 10ml pod capacity. It will bring you smooth & clean, leakproof vaping, provide consistent power output with stable chip. In addition, you can enjoy extended vaping with 1000mAh battery capacity. With vibrant RGB lighting, Gobar Skylin Pod Tornado can illuminate your vape in stunning colors.

Details:
1. 10ml pod capacity
2. Stable chip for consistent power output
3. 1000mAh built-in battery
4. Mesh coil technology
5. Easy topside filling
6. Ergonomic design
7. Vibrant RGB lighting

These tests below only note my personal opinion for the ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, EVE, Ampace, Sinowatt, Lishen, BAK, or Sanyo can change at any time! This can be one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. Never use them outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous discharge rating (CDR), never let it get colder than 0°C or hotter than 60°C to help lower the risks and extend cell life, and keep the plastic wrap and top insulating ring in perfect condition. Never use a battery that is physically damaged in any way.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
The 35E5 is the latest version of the Samsung 35E, performing essentially the same as the earlier version, the 35E3. This version has a “5” on the wrap, at the lower left corner of the printing. If there a “3” or no number at all (35E1, the original model) then it is one of the older 35E’s.

The switch from version 3 to 5 might be due to Samsung increasing cycle life or another characteristic of the cell that doesn’t show up in my basic performance testing.

At 5A this cell performs about the same as the Molicel M35A/P28A/P30B, Samsung 30Q6, LG MJ1, and Murata VTC6. The EVE 35V and Vapcell N41 perform a bit better in testing and the difference might be large enough to notice in actual use.

Some specs and observations…

• This is not a 3500mAh rated cell, even though it’s called the “35E”.
• It has only one datasheet capacity rating, 3350mAh minimum.
• The two cells I tested delivered 3431mAh and 3453mAh. This is pretty good consistency.
• DC internal resistance averaged 30.0mOhms for both cells.
• The datasheet has three charge current ratings; for good cycle life = 1A, standard rate = 1.7A, and the max = 2A. But the datsheet notes that charging at 2A will shorten cycle life.
• For charging I recommend 1.5A max, but only 1A if extending cycle life is a priority.
• This cell has a 2.65V low voltage cutoff, Do not go below 2.65V with this cell.
• This cell has a very low max temperature limit of 60°C. This is easily reached in a wrapped up battery pack or if you’re running a single cell hard. Do not allow the cell to go over 60°C.
• I recommend not going over about 5A to improve performance (minimize voltage sag) and help extend cell life.

Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic



18650 Ratings & Performance Table:


21700 Ratings & Performance Table:

I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Get more from Battery Mooch on Patreon.

A bill (HB 1425) known to advocates as “PMTA Registry” legislation has passed out of the House Judiciary Committee and is moving toward a vote by the full House.

If enacted, this law would effectively make the state of Pennsylvania an enforcement arm of cigarette companies and the Food and Drug Administration, empowering state authorities to enforce the disastrous federal anti-vaping regulations. This would put hundreds of independent vape shops out of business, hundreds of workers out of jobs, and thousands of Pennsylvania residents at risk of returning to smoking, or delaying attempts at quitting.

Please take a minute to send an email to your lawmakers urging them to oppose HB 1425!
CASAA Call to Action PA

Buy Now: Dinner Lady Disposable (50000 Puffs)

Smooth, tasty hits and an incredibly long-lasting vaping experience are provided by the Dinner Lady Disposable (50000 Puffs). It is convenient because it doesn't need to be charged or refilled. It is perfect for heavy users because it can offer up to 50,000 puffs and combines dependability, flavor, and convenience into a single, long-lasting disposable device.

Our Brands​

• Adjust
• CrazyAce
• FUME
• Geekvape
• Geekbar
• IGET
• Luffbar and more.

Joyetech Exceed PCC Case has 2000mAh battery capacity and supports 5V/2A USB-C charging. A color screen visualizes various data. Revolutionary feature—Smart Link, makes EXCEED PCC case more than just a charging case. After connecting the Exceed PCC Easy Kit, you can easily control the e-cigarette with the smart connection avatar chip, such as adjusting the power and other settings.

Quick Links:
Joyetech Exceed PCC Full Kit
Features:

• Size : 103*49*22mm
• Color: Black, Silver, Gold, Red
• Battery Capacity: 2000mAh
• Charging Current: USB-C (5V/2A)
• Smart Link Avatar Chip
• Color screen with animation and light effect
• Fit For:Joyetech Exceed PCC Full/Easy Kit

Includes:
1* Exceed PCC Case
1* User Manual
1* Warranty Card

Vandy Vape Rilo Pod Cartridge for Rilo GO, Rilo SO Kit uses dual core and dual mesh technology. Vandy Vape Rilo Go cartridge kit is compatible with single and double shot versions. The maximum capacity of single shot cartridge is 4ml e-liquid, and the maximum capacity of double shot cartridge is 3ml e-liquid, 2 per pack.

Quick Links:
Vandy Vape Rilo GO Pod Kit

Features:

• E-liquid Capacity: 4ml (Single Coil) / 3ml (Dual Coils)
• Unit:2pcs/pack
• Resistance Range: 0.15ohm (DTL) / 0.3ohm (DTL/RDL) / 0.6ohm (MTL)
• Fit for:Rilo GO,Rilo SO Kit

Includes:
1 * Vandy Vape Rilo Pod Cartridge for Rilo GO,Rilo SO Kit 3ml/4ml 2Pcs/Pack

Vandy Vape Rilo SO Pod Mod Kit is powered by an external 18650 battery and supports Type-C charging. The Rilo So Pod Kit is compatible with single-mesh and dual-mesh Rilo Pod cartridges. It is also equipped with a large 0.96-inch TFT color screen to clearly display various information.

Quick Links:
Vandy Vape Rilo Pod Cartridges

Features:

• Device Parameters
• Material: Aluminum alloy+PCTG
• Size: 22×47×100.5mm
• Battery: External 18650 Battery (Not Included)
• Power Range: 5-60W
• Charging: Type-C (5V/1A)
• Output Voltage: 3.2-4.2V
• Max Current: 25A
• Resistance Range: 0.15-3.0Ω (±5%)
• Continuous Fire Time: 6S
• Display: 0.96-inch TFT color
• Type-C Fast Recharging
• Airflow Control: Side airflow intake
• Twin-core Dual Mesh Coils
• Better MTL / DTL Experience
• Compatible with Vandy Vape Rilo Pod Cartridges (Single/Dual Coil)
• Cartridge Parameters
• Material: PCTG
• Size: 25.5×18.4×44.5mm
• Capacity: 3mL / 4mL
• Resistance Range: 0.15ohm (DTL) / 0.3ohm (DTL/RDL) / 0.6ohm (MTL)
• Refill: Front padding

Includes:
1* Rilo SO Pod Device
1* Type-C Cable
1* Cartridge Dual Mesh 0.15Ω
1* Cartridge Mesh 0.6Ω
1* Instructional Manual

Vandy Vape Rilo GO Pod System Kit is equipped with the world's first dual-core dual-mesh atomizer core. It has a built-in 2600mAh battery with a maximum power of up to 60W and reliable performance. It supports Type-C charging. This Pod system is also equipped with a 0.96-inch TFT color screen for users to view e-cigarette data.

Quick Links:
Vandy Vape Rilo Pod Cartridge

Features:

• Cartridge Parameters
• Material: PCTG
• Size: 25.5×18.4×44.5mm
• Capacity: 3mL / 4mL
• Resistance: 0.15Ω / 0.6Ω
• Refill: Front padding
• Device Parameters
• Material: Aluminum alloy+PCTG
• Size: 22×47×100.5mm
• Battery Capacity: 2600mAh
• Power Range: 5-60W
• Charging: Type-C (5V/1A)
• Output Voltage: 3.2-4.2V
• Max Current: 25A
• Resistance Range: 0.15-3.0Ω (±5%)
• Continuous Fire Time: 6S
• Display: 0.96-inch TFT color
• Airflow Control: Side airflow intake
• Twin-core Dual Mesh Coils
• Better MTL / DTL Experience

Includes:
1* Rilo GO Pod Device
1* Type-C Cable
1* Cartridge Dual Mesh 0.15Ω
1* Cartridge Mesh 0.6Ω
1* Instructional Manual

Vandy Vape Gemini DIY RBA Pod Cartridge Let you DIY the Vandy Vape Gemini cartridge kit and enjoy double the fun!

Quick Links:
Vandy Vape Gemini Pod System Kit

Features:

• Material: PCTG
• Size: 34.5*21.2*43.3mm
• Cartridge Capacity: 5.5mL
• Unit:1pc/pack
• Resistance RangeIY(0.01-1.5ohm)
• Refill: side Fill
• Fit for Vandy Vape Gemini Pod System Kit

Includes:
1 * Vandy Vape Gemini DIY RBA Pod Cartridge 5.5ml 1Pcs/Pack