For Sale Asmodus Lustro 200W MOD

Hello all.

Up for sale today is an Asmodus Lustro 200W mod which has been very lightly used. It's in very good condition.
20240228_140713.jpg

Features:​

  • Requires 2 x 18650 sized batteries (not included)
  • Accommodates Attys and tanks up to 25mm without overhang
  • Touch screen type: Capacitive Screen; Requires the electrical properties of the human body to detect when and where the screen is touched
  • Wattage range (Power mode): 5W – 200W
  • Wattage range (TC modes): 5W – 120W
  • Temperature control range: 212° – 572°F / 100° – 300°
  • Atomizer ohm range: 0.1 – 2.5 ohm
  • Max output voltage: 7.5V
  • Peek output current: 45A
  • Charging parameters: DC 5V/1A
  • Upgradeable firmware
  • USB TYPE-C
  • Customisable Light Bar and Fire Button
The color is purple.

Shipping free in the continental USA.

TO YOUR DOOR: $32.00

Thanks for looking.

20240228_140655.jpg


20240228_140722.jpg

20240228_140736.jpg

  • Question
OBS cube x charing issue

Howdy everyone, I'm at a bit of a loss; I have a OBS cube X vape that I've bought some years ago that won't charge or turn on when the battery is in. The vape has been stored away since maybe September 2023.

This battery is quite new, I bought it in the summer of 2023 but I haven't used to vape all that much since then so by all logic the battery should be fine.

The weird thing is that the vape turns on when I take the battery out and have the device itself plugged in (I read here that that's something I should try)

So how do I proceed? What could be the problem, should I just buy a new battery? I'm confident that the battery is the correct one because when I bought the new one I took the whole device to the vape shop and asked for a new one that the guy in the store made sure worked.

Thanks in advance!

The Latest. The Best. Trending Now! - Geek Vape Pulse & Raz TN9000 Disposable

unnamed (2).jpg

Buy Now!
Geek Vape Pulse Disposable (15000 Puffs)

Specification:


  • Regular Mode Max Puffs: 15000
  • Pulse Mode Max Puffs: 7500
  • Nicotine Strength: 5% (50mg)
  • Prefilled Capacity: 16mL
  • Battery Capacity: 650mAh
  • Charging Port: USB Type-C
  • Operation: Draw-Activation
  • 2 Power Modes - Regular / Pulse
  • Integrated Dual Mesh Coil
  • Display Screen
  • Battery Level Indicator
  • E-Liquid Level Indicator

unnamed.gif

Buy Now! Geek Vape Raz TN9000 Disposable (9000 Puffs)

Specification:


  • 12ml Pre-Filled E-Liquid
  • 5%(50mg) Nicotine Strength
  • 650mAh Rechargeable Built-in Battery
  • USB Type-C Port (not included)
  • Approximately 9000 Puffs
  • Mesh Coil
  • Draw-Activated
  • MTL Vaping
  • Mega 0.96" HD Display Screen
  • Vaping Animation
  • Charging Animation
  • Adjustable Airflow
  • Short-Circuit Protection
  • Overcharging Protection
  • E-Liquid Indicator
  • Battery Indicator

Our Brands

CASAA CALLS TO ACTION!

ALABAMA
⚠️URGENT⚠️ The HEARING is TODAY, February 28 at 1:30 PM!

HB 65 would put independent vape shops out of business, and thousands of people at risk of returning to smoking, or delaying attempts at quitting.

TAKE ACTION: https://casaa.org/call-to-action/alabama-stop-a-big-tobacco-protection-act/

Uwell Caliburn GK3 Tenet Pod System Kit: Unveiling Excellence

Greetings Vapers,

Step into a new realm of vaping innovation with the Uwell Caliburn GK3 Tenet Pod System Kit. Uwell, a name synonymous with quality and innovation, presents this exceptional kit, focusing on elevating user experience and delivering outstanding performance.
uwell-gk3.jpg

Product Intro:
The Caliburn GK3 Tenet Pod System Kit takes your vaping experience to new heights with a 2.5ml e-juice capacity, a formidable 1000mAh battery, and a maximum output of 25W. This kit is a testament to Uwell's dedication to creating vaping products that seamlessly blend convenience, portability, and durability.

First Impressions:
Upon laying eyes on the Caliburn GK3 Tenet, one is struck by its sleek and compact design, reminiscent of the OXVA XLIM SQ Pro Kit. Both devices share a streamlined aesthetic, hinting at the refined vaping experience that lies ahead.

Build Quality and Design:
Crafted from premium PCTG and Aluminum Alloy materials, the Caliburn GK3 Tenet exudes both durability and elegance. The side-filling system ensures hassle-free refills without any risk of leakage. The inclusion of a digital display screen and haptic feedback enhances user interaction, making this kit not only functional but also a pleasure to use.

Battery and Charging:
With a powerful 1000mAh rechargeable battery, the Caliburn GK3 Tenet provides ample power for extended vaping sessions. The addition of a Type-C charging cable ensures fast and efficient charging, minimizing downtime and maximizing convenience.

Durability:
Uwell's commitment to durability shines through in the construction of the Caliburn GK3 Tenet. Meticulous craftsmanship and sturdy materials ensure longevity, offering users a reliable vaping device that can withstand daily wear and tear.

Performance:
With a maximum output power of 25W and adjustable output settings, the Caliburn GK3 Tenet delivers consistent and satisfying performance. The smart chip technology automatically adjusts the output based on the installed uwell g3 pod cartridge, ensuring an optimal vaping experience with every puff.

Other kits you may prefer:
online vape shop
buy nicotine pouches

Sourcemore x SMOK Novo Master Box Kit Giveaway - 3/6



Hey folks,

What is the great news today? Sourcemore brings you the excellent vape kit - SMOK Novo Master Box Kit

Novo Master Box Kit features handy-sized form and hanging hole design to be compact and portable. It is powered by a built-in 1000mAh battery with 30W max and 1.4A Type-C charging. You can double click the power button to choose boost mode for intense taste or standard mode for mild taste. With the LED indicator design and intelligent detection, it can help you to better understand the device status. It is also designed with button/auto draw and stepless airflow control. In addition, it is compatible with Novo/Novo 2/Novo 2X Pod Cartridge that features 2ml capacity, easy top filling and leak-proof design.

To enter:
Play word chain: comment one word and the word should be related to vaping. One word per post and the word has to begin with the last letter of the previous word commented.

Example:
Sourcemore
Ejuice

If you draw a blank post like
'SMOK Novo Master Box Kit"
The next post will start with Letter 't'

Note:
1. One winner will be picked by random.org on Mar. 7th, 2024.
2. You must be over 21.
3. Number your entry, for instance: #Post 1.
4. Max 3 replies for each member.
5. If a winner is unable to claim a prize due to unforeseen circumstances, we would choose another winner for the contest.
  • Like
Reactions: La_Navidad

Review: Riot Connex Pre-filled Pod Kit

Riot Squad Connex Pod Kit - your hassle-free vaping solution! Whether you're new to vaping or simply looking for something easy to use, this user-friendly kit is here to make your vaping experience a breeze.

With specially designed prefilled connex pods, you can kiss goodbye to the hassle of filling your tank. Just attach one to the battery, and you're good to go! No more messy refills – it's that simple.

The built-in battery is as long-lasting as a pod and can be recharged in a flash. Plus, you can even vape while it's charging, so you'll never have to go without your favorite flavors.

Each kit comes with everything you need to get started, including two prefilled pods. Together, they deliver up to 1200 puffs of pure satisfaction.

With features like inhale activation, MTL vaping, and 2ml pods made from recycled plastic, the Riot Squad Connex pod kit is designed with convenience and sustainability in mind.

You can easily find the pod kit at the online vape shop uk and hope you can find your favourite one.

Cheapest Vapes:
hayati pro ultra 15000 vape
corssi crystal 6000

Introducing the all-new KROMA NOVA: Unleash PZP Coil Innovation

Unleash the power of PZP coils with the all-new Kroma Nova. Experience cutting-edge coil performance, beautiful design, and premium construction like never before.

Kroma Nova is the next step in pod mod evolution, with precise airflow adjustment, an upgraded interface, convenient sliding top fill, and a huge 3000mAh integrated battery. Dial in your perfect vaping experience with accuracy, ease and satisfaction.

For more info, please visit our website: https://www.innokin.com/kroma-nova

20240227-135442.jpg

Hot Now: Rincoe Manto AIO Ultra Kit

The rincoe manto aio ultra kit, a powerhouse of vaping technology designed for both beginners and experienced vapers. With a generous 5.2ml juice capacity and a maximum output of 80W, powered by a single 18650 battery (sold separately), this device delivers a truly immersive vaping experience.

Designed with convenience in mind, the Manto AIO Ultra supports both MTL and DTL vaping styles, catering to a wide range of preferences. Measuring at 80 x 52.5 x 26.6 mm, it's compact and easy to carry around.

Equipped with Rincoe's advanced Manto 2.0 chip, this device offers Smart/RBA modes for customizable vaping. The airflow system allows for precise control over your vaping experience, ensuring you get the perfect draw every time.

The Manto AIO Ultra is compatible with all Manto AIO coils, giving you the flexibility to experiment with different coil options. Whether you prefer MTL, DTL, or even DIY vaping, this kit has you covered.

In summary, the Rincoe Manto AIO Ultra Vape Kit is a versatile and powerful device that delivers exceptional flavor and vapor production. It's perfect for vapers of all levels who are looking for a reliable and customizable vaping experience. Our cheap online vape shop will show you more details about this product.

What's More:
https://vapesourcing.uk/innokin-kroma-nova-kit.html

New Zealand set to scrap world-first tobacco ban

I guess this belongs in this forum rather than the e-cig news one, but what do I know..

For Sale All Must Go! Best Offers Accepted!

hardware pics 2.png


Footoon Hades V2 and Cerberus Atty $99

Pioneer4you IPV D3S Kit with Atty $20

QP Design 28mm Kong RDA Master Kit $50

TimesVape Dreamer + Ardent RDA Set $90

Four Uwell Crowns:
1. Black New with coils $17
2. SS Used extra tank $12
3. Crown III Black used with OG Green Tip $15
4. Crown IV SS Used extra tank $20 a 1 coil

Wire: $50 for the lot.

2 Tobecco 26ga Kanthal 32 x 32 Clapton II rolls $10

UD Roll Coils Twisted Kanthal $25 for the lot
26ga two wire 15ft
28ga two wire 30ft
30ga three wire 30ft
28ga three wire 15ft
28ga three ribbon wire 15ft

Thunderhead Creations Clapton Kanthal Wire Rods
145mm
28/24
2 packs $20

GeekVape Kanthal 26/32 Clapton 15ft $15

100pk 24ga .6 2mm ID NiCr pack

The Vape Street Premium Kanthal Spools: $25 for the lot.
These have been used to make few coils so cannot guarantee the exact length but they should be pretty close.
26ga 150ft
.5 x .1 mm 100ft
28ga 150ft
30ga 150ft

The Vape Street Premium Spools: $25 for the lot
Ni 200 26ga 100ft
Ni 200 24ga 100ft
NiCr 24ga 100ft

Titan Ti Wires 10ft. Packs: $10 each
24ga
26ga (2)
28ga (2)

GeekVape Ammit RTA SS 22mm no extra tank $15

GeekVape Ammit RTA Gold 24mm $20

Damn Vape Intense Mesh MTL RDA $12

Vulcan 22mm RDA $15

Tendou Nobunaga RDA (2-SS) (1-Black) $10 each

Tendou Shingen RDA (2-SS) (2-Black) $15 each

Aria Anarchist Phenotype-L RDA + Top Airflow Cap SS $30

OG Praxis Derringer RDA’s New (5) $50 each

Atmizoo Tripod RTA $95

Alba/Siam Ti Cobra Genesis RTA + spare tank $90

Older but Not used Efest 18500 1K mAh (9) 1100 mAh (5)
18350 700 mAh (4) AW 18490 1100 mAh button top (2) FREE

Hohmtech Hohm Slice 26650 Mods Red $35 Blue with paint sanded $25

Vaponaute Le Magister clone $15

Lanyards (6) FREE one with purchase :)

GeekVape Griffin SS 22 and 25 SS Mini $15 each

Vapfly Pixie RDA Black $12

Wismec Neutron SS RDA $10

Items will come in original packaging with all of their accessories and paperwork.
Items are used and in 8-9/10 condition.
See photos as what you see is what you get. Need more pics? Let me know.

Shipping: USPS Priority Mail or USPS Ground Advantage.

Payment: PP F&F or the Cash App.
Please use “electronic parts” or similar as a description only.

Uncle Meringue by Charlie’s Chalk Dust

Uncle Meringue by Charlie's Chalk Dust
Producer: USA
Shortfill/ 50ml, VG/PG ratio: 70/30
Before I get into testing anything else, I have to introduce you to Charlie's Chalk Dust's "Uncle Meringue", as we are running low on the bottle and I don't want you to miss out on this treat. So, the product comes from the unicornvape site, where it is currently available for pennies on the dollar for just three euros. The manufacturer describes it as a "unique dessert blend of fruity rainbow sherbert mixed into a meringue pie", which is what you're going to get. Now forget that quickly, at least the beginning of the sentence, if there's fruit in it you won't smell it on its own. But there's the meringue pie, which will be the main thread that will make it taste like a dessert category.
It smells like a pastry pie mixed with toasted meringue. It's a bit indescribable, there must be more to it than that, but it's very pleasant.
The intensity of flavours is medium strong, so I opted for a Mtl Rta tank for testing instead.
The flavours: the mixing of the pie and meringue, when the steam is a little warmer, almost gives the sensation of having just been taken out of the oven. Creamy and frothy, sweet and doughy, somehow the Californian company has really nailed it this time. There's a fruity part that you can smell when you inhale, but it just lingers there, but you can't figure out what it is. After a bit of reading, they describe all sorts of things, from candy to pineapple, but none of them resemble the flavour you mention. Maybe it's a fruity candy, but I wouldn't swear to it. In a word, if you're about to order from the above mentioned site, throw it in the basket, save your tank and enjoy the excellent scented cake from "Uncle Meringue".

Attachments

  • IMG_20240227_165341.jpg
    IMG_20240227_165341.jpg
    1.5 MB · Views: 8
  • Like
Reactions: gloopdegurp

Mini lab vortex mixer: any good for juice?

Do these things work well? Seeing one for $25 on Amazon. It looks like you have to put some large steel bbs in them? Not sure. There are also nail polish shaking machines that seem to be of two types: one is the “strap the whole bottle down and shake it” type which is at the low end of lab vortex mixers, and then there is a “grab it by the top with a rubber adaptor” type which is cheaper. Those are like $10 but I don’t know if they have an adaptor that would fit a juice bottle or not. My arm is tired though. Thinking about this one lacking better advice:
Login to view embedded media Some deep nerd action btw
  • Like
Reactions: smacuser

Hope this is legit

Something strange happened this morning - I got an email from ECF saying I had to change my Password which I did, then got into the site as normal for a moment before it blanked out and required me to log in again. I have been a member since 2015 and this has never happened before. I have contacted the Admin Team to see if this is legit or if I have been hacked, as I would not wish to find I have been banned for posting inappropriate material if I have been hacked.

Unveiling Elegance and Performance: Elux CYBEROVER 18K Disposable Vape

Greetings Vapers,

Embark on a journey into the future of vaping with the Elux CYBEROVER 18K Disposable Vape – a fusion of style and sophistication that promises an unmatched vaping experience. For those who demand both elegance and performance, this device stands tall, exploring infinite lands of flavor and clouds.
elux-cyberover-2.jpg

Design and Aesthetics:
More than just a vaping device, the CYBEROVER 18K is a bona fide statement piece. Encased in a high-quality stainless steel shell, it emanates a sense of luxury and durability that sets it apart from the crowd. The sleek design is not just for show – it's ergonomically crafted for a comfortable grip, ensuring your vaping experience is not only stylish but also enjoyable. Its compact size makes it a perfect travel companion, allowing you to relish your vaping moments wherever life takes you.

Technical Specifications:
The CYBEROVER 18K is not just a pretty face; it boasts advanced technology for a superior vaping experience. 18mL Pre-filled E-liquid Tank: No more frequent refills! This device comes with an impressive 18mL pre-filled e-liquid tank, ensuring long-lasting enjoyment and saving you from the hassle of constant top-ups.

5% (50mg) Nicotine Strength: Catering to those who seek a satisfying throat hit paired with rich flavor, the CYBEROVER 18K delivers with a 5% (50mg) nicotine strength. 600mAh Type-C Rechargeable Battery: At the heart of this device lies a robust 600mAh Type-C rechargeable battery – a feature rarely seen in disposable vapes. This modern charging capability not only makes the device more sustainable but also ensures you are never far from a full charge.

18,000 Puffs:
Engineered to support approximately 18,000 puffs, the CYBEROVER 18K disposable pod near me is one of the most enduring vapes on the market, promising an extended and satisfying vaping experience.

Summary
Welcome to a new era where elegance meets functionality, and sophistication intertwines with performance. Elevate your vaping game with the Elux CYBEROVER 18K Disposable Vape – a best online vape shop usa device designed for those who appreciate the finer things in life. Roam freely in the realms of flavor and clouds, knowing that you hold a piece of the future in the palm of your hand.

Related kit you may prefer:
pyne pods vape
runtz x litty review

Eleaf iStick i75 Kit with EN Air Tank | EN Air Tank

Eleaf iStick i75 Kit with EN Air Tank

Eleaf iStick i75 EN Air Kit is the combination of iStick i75 Mod and EN Air Tank, which will deliver an exceptional vaping experience. The EN Air Tank is designed for MTL vaping, can hold 3.5ml capacity. In addition, the tank features top airflow and slide-top filling to minimize or eliminate the risk of leakage, precise dual-side airflow control to suit different vaping needs. It is compatible with Joyetech EN Coils of 0.6ohm/0.8ohm/1.2ohm. The iStick i75 Mod has 3000mAh built-in battery, features 2A type-c fast charging and 75W max output. With VW and VV modes, you can fine-tune it for optimal vapor, and coil performance.

Details:
1. Built-in 3000mAh battery
2. Leak-free slide-top filling and top airflow design
3. Powerful 75W output
4. Equipped with MTL EN Air Atomizer
5. Precise dual-side ariflow control
6. Compatible with EN Coil of 0.6ohm/0.8ohm/1.2ohm
7. VW/VV modes available
8. Visual delight and tactile satisfaction
9. 2A type-c fast charging




Eleaf EN Air Tank

EN Air Tank is designed for MTL vaping, can hold 3.5ml capacity. In addition, the tank features top airflow and slide-top filling to minimize or eliminate the risk of leakage, precise dual-side airflow control to suit different vaping needs. It is compatible with Joyetech EN Coils of 0.6ohm/0.8ohm/1.2ohm.

Details:
1. Designed for MTL vaping
2. 3.5ml capacity
3. Top airflow design
4. Precise dual-side airflow control
5. Slide top filling
6. Compatible with Joyetech EN Coils


Sale: WGA Crystal Pro Max 2 Disposable Vape 6000 Puffs

WGA Crystal Pro Max 2, the latest in disposable vape technology boasts an impressive 6000-puff capacity. With its sleek and portable design, this device offers a wide range of pre-filled e-liquid flavors to suit every palate. Activated by draw-inhalation, it eliminates the hassle of buttons or switches.

Featuring a 20% nicotine strength (20mg) and a generous 14ml e-liquid capacity, each puff delivers a smooth throat hit. The inclusion of a mesh coil ensures optimal flavor and vapor production. With a long-lasting 1600mAh battery, the WGA Pro Max 2 promises extended use without the need for refilling or recharging.

Ergonomically designed for comfort, this TPD-compliant device provides a satisfying vaping experience with up to vape 6000 puffs.

This wonderful disposable vape is shown at the vape shop uk, you can visit anytime as you want.

You may be interested in:
r and m vape
enjoy ultra 9000

Innokin Kroma Nova Pod Mod 3.000mAh Review By Frenkyou

  • Like
Reactions: Innokin_Alisa

Innokin Kroma Nova Pod Mod 3.000mAh Review By Frenkyou

Innokin Kroma Nova Pod Mod 3.000mAh 1.JPG


Hi, today let's take a look at the Kroma Nova Pod Kit sent to me by Innokin. In this Test I will examine each of the characteristics that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Innokin Kroma Nova Pod Kit; Before starting, let's look together at some special features indicated by the manufacturer:

• Vape MTL, RDTL and DTL
• Magnesium alloy and leather construction for great strength, ergonomics and durability
• Variable Power: 6~60W Output Range Smart Mode
• Newly updated interface for intuitive operation
• Automatic power setting with Smart Coil ID
• Huge 3000mAh battery for all-day performance
• Customize your inhalation with adjustable airflow
• Strong magnetic connector for easy removal and installation of the Pod
• Easy coil replacement with push-fit installation
• Clean and convenient filling with smooth top filling system
• The new PZP coils feature a plug-and-play design
• Accurate regulation of the air flow.

Innokin Kroma Nova Pod Mod 3.000mAh 2.JPG


► Innokin Kroma Nova Pod Kit; Packaging:
The sugar cane colored packaging is made of 100% recyclable materials. On the front of the box presents the image of the Kit together with the list of the main features, Innokin reminds us of the use of the new PZP coils. On the back they are listed; the warnings, the packing list, the scratch&check, the QR-Code and the address of Shenzhen Innokin Technology Co., Ltd. On the sides of the box are shown; a partial image of the Kit and the autographed signatures of P.Busardo and Vapingreek who collaborated with Innokin on the development of this kit.

Innokin Kroma Nova Pod Mod 3.000mAh 3.jpg


Innokin Kroma Nova Pod Mod 3.000mAh 4.jpg


► Innokin Kroma Nova Pod Kit; Packing List:
• 1x Kroma Nova device
• 1x Kroma Nova Pod
• PZP Coil 0.4Ω (30-40W)
• PZP Coil 1.0Ω (9-13W)
• 1x RDL Replacement Drip Tip
• 1x USB-C cable
• 1x User Manual

Innokin Kroma Nova Pod Mod 3.000mAh 5.jpg


► Innokin Kroma Nova Pod Kit; Specifications:
• Dimensions: 116.33 x 39.15 x 30.76mm
• Battery: Integrated 3000mAh
• Power: 60W
• Cartridge capacity: 3ml
• USB-C fast charging

Innokin Kroma Nova Pod Mod 3.000mAh 6.JPG


► Innokin Kroma Nova Pod Kit; Available colours:
• AZURE BLUE
• TIFFANY BLUE
• MAHOGANY BROWN
• VINTAGE RED
• SADDLE BROWN
• SHADOW BLACK
• SNOWFLAKE WHITE
• BLUSH PINK

Innokin Kroma Nova Pod Mod 3.000mAh 7.JPG


► Innokin Kroma Nova Pod Kit; First Impressions:
Innokin with the collaboration of Phil Busardo and Dimitris Agrafiotis (VapinGreek) evolves this project taking inspiration from the original Kroma Z, thus the Kroma Nova 60W is born which uses a new coil platform called PZP, according to Innokin these resistors raise the quality of vaping to new levels and allow quicker and cleaner coil changes. Starting to handle the Kroma Nova, an excellent tactile feeling is immediately established thanks to finely crafted decorations, furthermore the ergonomics of the device in the hand are very good thanks to a truly compact form factor in relation to the enormous 3,000mAh battery which is integrated within the mod.

Innokin Kroma Nova Pod Mod 3.000mAh 8.jpg


► Innokin Kroma Nova Pod Kit; How it is made:
I received two different colors of Kroma Nova for this test; VINTAGE RED & AZURE BLUE. Kroma Nova is available in 8 different colors, I have to say that the two color variants I received are really beautiful, the paint on the mod appears well distributed and of high quality. On the bottom of Kroma Nova are the data of the enormous 3,000mAh internal battery, the base has a large footprint on the ground which gives the mod great stability, even when charging. Powered by a large 3000mAh internal battery, KROMA NOVA delivers consistent performance with long life. I managed to get 416 puffs at 30W selected, the charging time with a speed of 1.7A, is quite fast. You can accurately monitor your battery life percentage in the OLED display, so you'll never run out of power while on the go.

Innokin Kroma Nova Pod Mod 3.000mAh 9.jpg


The side profile of Kroma Nova with its sporty design shows all its charm, starting from the top you can see the cartridge sloping on one side perfectly connected with the cut of the mod. The air intakes underneath are opposed on both sides and imitate those of a sports car. The slots for the passage of air are adjustable using the slider knob located on the handle of the Mod. On the metal part of the frame you can see the writing "Kroma Nova" on one side and the writing "Innokin" on the other side. The soft synthetic leather covering integrates perfectly into the frame and extends to the back of the Mod. The grip is comfortable, at the top there is the slider button for adjusting the air flow which is capable of managing a large RDL flow but also a narrow MTL flow. The handle is embellished with two parallel vertical stitchings and the "NOVA" writing heat-branded on the synthetic leather.

Innokin Kroma Nova Pod Mod 3.000mAh 10.jpg

Review: Lost Vape Thelema Nexus Pod Kit

Lost Vape Thelema Nexus Kit, a stylish vaping solution that seamlessly blends fashion and technology into your daily smoking routine. Weighing a mere 100g and equipped with a 2000mAh power bank, this sleek device offers a dual flavorful experience. Its touch of elegance and user-friendly design make it a smart and stylish choice for those who value simplicity and functionality.

ULTRA-LIGHT & COMPACT DESIGN:
At just 100g, it's the perfect companion for on-the-go vaping. Crafted with a seamless fusion of PC, leather, and aluminum, our Powerbank & Pen Pod Kit embodies elegance and innovation, offering both style and substance in a compact package.

ERGONOMIC DRIP TIP DESIGN:
Every aspect of its AIO structure is meticulously crafted. From materials selection to precision engineering, we leave no room for compromise.

DUAL FLAVORFUL DELIGHT:
The Nexus cartridge is compatible with both Pod Drip Tip and Filter Drip Tip. Utilize the Pod Drip Tip for a smooth flavor experience or switch to the Filter Drip Tip for a sensation reminiscent of traditional cigarettes.

2000mAh HIGH CAPACITY POWERBANK:
With the 2000mAh power bank, you can charge the Nexus Pen Kit multiple times, ensuring a week-long enjoyment. Keep track of remaining power and charging status with the 360° Ring Power Indicator featuring three indicators for quick insights. The online vape shop uk always welcomes you to learn more details.

I would like to recommend:
rincoe manto ultra
kroma nova

  • Question
Single mod battery

Hey, did someone ever vape in a single mod battery device with a 21,700 and a 18,650 battery as well and incase some of you do or did can you fill any different?
I always use 21,700 battery on my 100w single mod and never did understand just like Mike from element vape on you tube way to make 2 devices one for 21,700 and and option to use 18,650 as well.
And one device with 18,650 built-in like the voopoo xt and Mt what is the common sense to buy a mod that after the battery is dead you can't use it anymore?
I'm thinking to purchase the lost vape centaurus 100m and its comes with a 18,650 thet is not built-in but I wonder will it effect the vaping experience?
Thank you and happy vaping day to all.

Innokin Kroma Nova review by hittman

  • Like
Reactions: Innokin_Alisa

INNOKIN KROMA NOVA KIT review by hittman

Hello again. Today I’m here with you to talk about the latest release from Innokin which is the Kroma Nova pod mod kit. It is the latest in Kroma line of products which include the Kroma A, Kroma Z, and Kroma 217. The Kroma Nova has an internal 3000mah battery with a maximum output of 60 watts. The listed charging rate is 1.7A / 5V so it should charge completely from dead in less than two hours with a wall wart rated for 2A or larger. It is a variable wattage device but also has a smart function as well as a color display. It does have adjustable airflow which is very important. The pod cartridge for the Nova is a top fill which I’m very glad to see. I was surprised to see that the Nova uses a new line of coils from Innokin called PZP coils of which there are four different resistances available currently but only two of them are included in the kit.

ytlcfEz.jpeg


v2t5oA7.jpeg


WHAT’S IN THE BOX?

  • 1x Kroma-Nova Mod (3000mAh)
  • 1x Kroma-Nova 3ml Pod (PZP Coil 1.0ohm Pre-installed)
  • 1x Spare PZP Coil 0.4ohm
  • 1x Spare RDL Mouthpiece
  • 1x Type-C Charging Cable
  • 1x Quick Start Guide
  • 1x Warning Booklet
1708997455597.png


SPECIFICATIONS:


  • Size: 116.3x39x30.7mm
  • Battery: 3000mAh (internal)
  • Display: OLED screen (Size not specified)
  • Output: 6-60W
  • Modes: Variable wattage, smart auto output
  • Type C USB charging – 1.7A charge rate
  • Resistance range: Not specified
  • Capacity: 3ml (Standard) / 2ml (TPD)
  • Coils: PZP coil range
  • Slide top fill
  • Adjustable airflow
UNI8StF.jpeg


FEATURES:


  • 6 - 60W Adjustable Power
  • All-day Vaping With 3000mAh Battery
  • Auto Power Setting With Smart Coil ID
  • Stylish Leather and Metal Design
  • Tailor Your Inhale With Adjustable Airflow
  • Easy Coil Changes With Push-fit Installation
  • Clean, Convenient Filling With Sliding Top-fill Pods
YN8cl28.jpeg


4pnH6xt.jpeg


NKeCPze.jpeg


INITIAL THOUGHTS:

I have to say that I was surprised to see a new series of coils for the Kroma Nova. The infamous Z Coils have been used across many different Innokin devices and are tried and true. I honestly would have been ok with them being used on this device but the new coils do not disappoint.

The packaging for the Kroma Nova is what I have become accustomed to seeing from Innokin. They are sticking with materials that can be recycled. The front and back of the box has a large warning on both sides which I believe is required for marketing in the United States. I’m sure everyone knows that there isn’t really any nicotine contained in the Nova package and only contains hardware but unfortunately the FDA is requiring this kind of labeling and is classifying hardware as nicotine products. Besides the large warning, the front does have a partial color picture of the Kroma Nova and is color accurate to what is actually inside the box. There are also a list of features on the front. The back side has the usual contents list, company information, and authenticity code.

1708997674475.png


Like some other devices I’ve tested from Innokin, the boxes flip open from the bottom end to expose the Kroma Nova sitting in a cardboard insert. I greatly appreciate that Innokin sent two samples as well as two spare boxes of coils. Unfortunately I was not sent the other two resistances of coils that are not included in the kits but did receive one box of each of the included resistances for additional testing of flavors. The user manual, spare coil, spare RDL tip, and charging cable are located underneath the tray holding the device.

1708997726750.png


1708997746932.png



The pod for the Nova has an arrow on the front to indicate the direction of movement in order to fill the pod. I do like that they chose to use a top fill design as I grow tired of side and bottom fill pods. The problem that I have with the design is the rubber gasket over the fill port. I find that it’s hard to fill the pod without liquid pooling on top of the rubber gasket. It kind of seals around the tip of the bottle and allows liquid to pool there which has to be wiped off before sliding the top closed. I do like the included drip tips and find them very comfortable to use. Since there is a raised ledge, some drip tips might not look right if they are wider on the bottom.

The Nova pod uses the new PZP series of coils which are currently available in four resistances. I was only sent spare coils for the 1.0 and .4 ohm coils so cannot give my thoughts on the other two that are available. As for the two included, I was very pleased with the flavor and vapor production. The .4 ohm coil is rated for 30-40 watts while the 1.0 ohm coil is rated for 9-13 watts. The PZP coils are a push to seat style of coil.

1708997781696.png


1708997805338.png



The pod is clear and can be seen from the side to check liquid level which is a good feature. The Nova feels like a quality built device and very comfortable to hold. The Kroma Nova name is stamped into the body on one side and the Innokin name is stamped on the opposite side. There are two airflow inlet holes on each side with a sliding lever on the back to adjust airflow. It does a nice job of going from a very tight MTL to a really decent RDL which I happen to prefer. The back side of the Nova has a leather like wrap with nice stitching and the Nova name stamped in it. The front side of the Nova comes with a clear sticker over the screen that lets you know to press the fire bar three times to turn the device on. Take notice that the charging port for the 3000mah internal battery is located at the very bottom of the front side.

1708997847100.png


1708997869985.png



The pod opening on the Nova has two magnets as well as two gold plated electrical contact that make connection with the coil once the pod is inserted. The coils stick out of the bottom of the pod quite a bit which is why the opening with the contacts is recessed so much. The magnets are not what holds the pod in place alone. There is a rectangular protrusion on the back side of the pod that can be seen in the second picture below. That protruding plastic snaps into a cut out on the inside of the pod opening on the back side which can be seen in the third picture. This holds the pod in place very securely with no worry at all of the pod coming out accidentally. To remove the pod, lift the pod from back side while tilting it forward. Also when inserting the pod it is easiest to put the front in first then push down on the back side and you will feel it click into place.

1708997907512.png


1708997949007.png


FPGVyeQ.jpeg


The front of the Nova has a fire bar rather than a standard fire button. The Nova has a color screen but honestly the color combination makes it a little hard for me to see the smaller font on the screen. From top to bottom the display shows the following information.

  • Lock/unlock
  • Battery percentage and level indicator
  • Set wattage
  • Coil resistance
I was a little surprised that there wasn’t a puff counter on the main display. At first I thought maybe it didn’t have one until I read the user manual and saw that there was in fact one but it took a button combination to access it. The button operation for the Nova is as follows.

  • Press the fire bar 3X to turn the device on/off
  • Press and hold the fire bar and the + button to enter the secondary screen that shows the puff counter and output voltage
  • Press and hold the fire bar and the – button to lock the adjustment buttons
  • Press the + and – buttons to access the settings menu where the options are Cutoff and Screen
fhv1JIE.jpeg


FINAL THOUGHTS:


Once again it has been a real pleasure testing another Innokin device. The Kroma Nova is a really well built and well performing device. The 3000mah internal battery provides a very long usage period between charges. I was able to get over 400 puffs using the .4 ohm coil at 36 watts. The Nova has a charging rate of 1.7A/5V which turns into a charging time of about 1.75 hours to fully charge.

Since I was sent two samples for the review, I used the 1.0 ohm coil in one device and the .4 ohm coil in the second one. I used a Net tobacco mix in the 1.0 ohm and still had the airflow about ¾ open to still get a nice MTL type vape. I feel like the MTL tip and the coil work in combination to tighten the airflow so it isn’t necessary to really tighten the adjustable airflow control that much. I do prefer an airy MTL and this is what I got with those settings and the wattage at 13 watts. The flavor and vapor production were very good even after 600 puffs on the counter. Next up I used a one shot called The Muller with the .4ohm coil. This time I used the RDL tip and still had the airflow mostly open. I settled in at 36 watts with this coil. I had about 450 puffs on this coil with no noticeable loss of flavor. These new PZP coils seem to have a pretty long lifespan from what I can tell. There are two other resistances of coils available for purchase separately but unfortunately I did not receive any for testing.

oygC0CI.jpeg


During my time testing both of the samples that I received, I experienced no signs of condensation or leaking under the coil. Both stayed completely dry the entire time I used them. I very much like how the top of the pod slides open for filling but don’t really care much for the gasket over the fill port as it can cause a slight pooling of liquid on top of the gasket when filling which has to be wiped off. That and a little difficulty seeing the smaller display numbers are my only two complaints. Other than that I am very happy with the build quality and performance of the Innokin Kroma Nova.

I’d like to thank Innokin and Alisa for sending the Innokin Kroma Nova samples and spare coils for testing. It was truly a pleasure as Innokin makes very good quality devices in my opinion. Thanks also to the readers for joining me for another review. Below is a link to the website for your viewing pleasure where you can see the wide array of devices and tanks that Innokin has to offer.

Kroma Nova - Vape Pod | INNOKIN®

WKylmiL.jpg

VooPoo Argus Pro 2 Pod Kit - PnP X Coils | Reviews by Z-Lee

VooPoo Argus Pro 2 Pod Kit - PnP X Coils | Reviews by Z-Lee

VooPoo Argus Pro 2 Pod Kit
Explore Excellence



VooPoo Argus Pro 2 Site Banner.png


Hello again folks! Today I'm going to share with you my experience testing one of VooPoo's newest products, the Argus Pro 2 pod kit. This is an internal battery device and unlike many of their recent releases, does not seem to have an external battery counterpart - at least not as of the date of this posting. This kit also features their newest coil platform, the PnP X series which has shown a vast improvement over their original PnP series coils. We'll go through all of it pretty thoroughly, so sit back and enjoy the read.

I want to thank VooPoo for sending this product out for review. As per norm, this critique will be conducted in a fair and honest manner. I encourage you to visit their site here, to experience a better visual representation of the Argus Pro 2 (and you'll need to since I left out some stuff due to space constraints). Without further adieu, lehgo!



⇒ QUICK SITE OVERVIEW ⇐


Color Options (you'll have to visit the link I provided above to see the different colors):

> Pearl White
> Sky Purple
> Cocoa Brown
> Modern Red
> Space Gray
> Lake Blue
> Spray Black



Features:


VooPoo-Argus-Pro-2-Site-Features.jpg



Specs & Package Details:


VooPoo-Argus-Pro-2-Site-Specs&Package.jpg



⇒ TEST RESULTS & OBSERVATIONS ⇐


Intro:



20240225_235912.jpg


The Argus Pro 2 is packaged nicely with not a lot of extras, but certainly enough to get you up and running; especially with a spare coil. The USB Type-C charging cable is a USB-A adapter and is a nice touch, but hardly needed in 2024. It's about a foot long. However, it's convenient that they send one as a spare backup that you can leave in your car, purse, or computer bag if you don't already have a few stowed away. I've certainly found myself using one in a pinch on a few occasions. There's also a nice PnP X coil compatibility card that comes with the User Manual that shows which PnP X coils are currently available and how they're meant to be used. This is actually nice being that VooPoo has a ton of different coils, and helps to clarify what this kit specifically uses so you know what you're looking for when it comes time to purchase new ones. A better view of this card is shown when I go over the coils.



The Argus Pro 2 Mod:

VooPoo-Argus-Pro-2-Exterior.jpg


The Argus Pro 2 sort of reminds me of the Argus MT, but reduced to the size of the Drag S2. For a 2000 mAh and above internal battery capacity device, this is about as small as they get. They tend to be a tad bit smaller than even the smallest external 18650 devices. The colorway I received is Lake Blue, and is fairly accurate to what they show on their site. The transition between the blue and green is very smooth and is pleasing to the eye.

On the front-facing portion of the device from top to bottom, there's a lanyard loop, a clicky rectangular fire button, a 0.96" TFT LCD display, a physical locking switch, the down and up adjustment buttons, and a dust-protected USB Type-C charging port.

On the back, is the typical faux-leather stick that has stitching running along the upper and lower portions of the X design. This lays in well along the zinc-alloy external frame that encases the Argus Pro 2 and has a cushy but yet plasticy feel to it.

The bottom of the device has a rubber bumper that adds a bit of cushion when setting the mod down and also offers anti-slip characteristics. As I've stated in previous reviews, this can be both a pro and a con, being that an anti-slip bottom usually means it's easier to tip over.

On the top of the device are the standard spring-loaded gold/brass-plated pins. What you don't see here are any airflow vents which is fantastic to me. Bottom airflow pod tanks require an airflow inlet somewhere in this pod well region, and that is often the area that leaks e-liquid when there are leaks in the bottom of the pod tank. Being that the new PnP X pod tank is top airflow, this area can stay nice and sealed, making any cleanup (if you encounter it at all) very easy to do. You can simply stuff a paper towel down in this area and spin it without having to clean out any vents. This is a big A+ from me in this design change.

As I mentioned before, the external frame of the Argus Pro 2 is made of zinc-alloy which is becoming somewhat rare. Yes, it's slightly heavier than aluminum, but much stronger. I'm happy to see that VooPoo opted to stick with zinc-alloy here. I've already dropped this device probably a half a dozen times, and she's still ticking!


VooPoo-Argus-Pro-2-Mod Features.jpg


A few of the features that sets the Argus Pro 2 apart from most other large pod devices, are the physical locking switch, the dust-covered USB Type-C port, and the lanyard loop. Disregard the scratching you see on the screen, I've left the screen protector film on as I do with most devices. The screen itself, looks crystal clear.

The physical locking switch is a very nice feature that I'm super happy to see being implemented in more and more devices that are being released. This is just a nice and convenient way to disable the device from being fired or to prevent any accidental changes in wattage. Without this locking switch, you'd normally hit the fire button 3 times quickly to lock it, or 5 times to turn the device off for stowing away. This can be rather annoying if one of the clicks isn't registered, and seems to add unneeded wear on the fire button as well as on the battery and coil. Even better, you can do it without having to look at the device at all. When the lock switch is flipped up, you'll notice on the display a little red lock symbol. When the switch is flipped down, this icon disappears.



VooPoo-Argus-Pro-2-Menu.jpg



The Argus Pro 2 UI is super easy to understand and operate. The wattage ranges from 5 to 80W in full watt increments. To turn the device on or off, quickly press the fire button 5 times. To access the menu, hold the down [-] and up [+] buttons together for ~2 seconds. While in the menu, you'll see MODES which allows you to select the 3 fire modes shown above, SETTINGS which only allows you to reset the puff counter, and ABOUT DEVICE which shows the firmware running the UI and some 8-digit LEVEL CODE that I'm not exactly sure about.

Smart Mode automatically detects the coil resistance and will adjust the mod to what power it thinks you should be vaping at. I'd back it down 10-20 watts and work your way up. When you drop in a 0.15 coil, it will default to 65W. I'm currently vaping the 0.15 ohm coil at 45W and that's plenty. Find what suits you best.

RBA Mode gives you full control on what wattage you'd like to use. I think it defaults to the same setting as Smart Mode initially, so again, I'd recommend that you back it down to start and work your wattage up to your preference.

Turbo Mode is a new VooPoo feature, and offers a "boost" to get the coil heated faster. In doing so, it uses a slight bit more battery power but you'll notice the onset of flavor and cloud plumage quicker. It's a nice feature if you're not a fan of the normal ramp up or "swelling".

VooPoo chips have an auto-shutoff timer at around 5 or 10 minutes, that requires you to press fire to wake it up, before firing to vape. This can be rather annoying, but it would seem that VooPoo does not intend to get rid of this anytime soon.

The mod performs very well down to about 35-40% battery remaining. Below that, there's a noticeable reduction in power output. The device stops working due to "Low Battery" between 18% and upwards of 25% at 45 watts which is premature on any scale. If you're using a lower power setting, you can squeeze out a few more battery percentages before you'll experience the same thing. For a 3000 mAh internal battery, we're really only able to utilize about 2200 mAh capacity which is a shame.

When plugged in, the Argus Pro 2 charges at 1.4A and takes a little over an hour to fully charge from 25%. And as with all VooPoo devices, there is no pass-through vaping capability.




The PnP X Platform:

Drag-S2-X2-Pod.jpg


The PnP X pod cartridge is probably the most important part of this pod kit. This isn't to demote the importance or the performance of the Argus Pro 2 pod mod, but it does what it needs to do, and quite well. The PnP X series coils were recently released as an upgrade from the original PnP coils, and that's likely due to the original PnP coils being plagued with leakage problems. I, along with many people on reddit and even here on ECF, noticed this from the get-go. With the exception of the newest PnP-TW coils, the X are some of VooPoo's better coils in terms of leak prevention, which to me is the crux of a pod device being a go or no-go. Nobody likes a mess, and what would be the point of a device being pocket or purse-friendly, if it's prone to leaking? The top airflow of the PnP X pod cartridge is a huge bonus for those that fear e-liquid messes. That is, as long as you keep the device standing upright. This device fell over in my lunch bag while at work, and it did leak some which is pretty much the only downfall of a top airflow system. Keep it upright, and you should be leak-free.

The 510 drip tip does not remove from the PnP X pods. I've either completely lost my grip strength, or these are indeed not meant to be removed. Though I'm a bit confused from VooPoo's site because it shows that the 510 drip tip is removable, but maybe that's a feature exclusive to the MTL kit that's available as a separate purchase.

The magnets at the base of the pod are as strong as they need to be to keep the pod secure under normal operation, but they will not prevent the pod from popping out when dropped. I can pick the device up and even shake it a bit by the pod and it will remain intact.

There's one particular thing to note about the coil installation. With all VooPoo coils, as well as many other brands, there are parallel cutouts along the otherwise circular bottom of the coil. It is important that these cutouts line up with the straight edges on the bottom of the pod so that the coil seats and seals properly. This forced orientation is to ensure that the airflow slots on the coil face the two cutout areas with arrows on each side of the coil so that the airflow remains as least turbulent as possible.


VooPoo-Argus-Pro-2-Coils.jpg



The PnP X coil build design is nothing new, it's just that their dimensions do not fit with other VooPoo coil platforms. What makes the PnP X coils shine, is the pod cartridge. There's a single mesh coil wrapped around the inside of the coil head that meet up and attach on both ends with the positive and negative posts as seen above.

The pre-installed coil that comes with the Argus Pro 2 kit has a resistance of 0.15Ω with a recommended wattage range between 60-80W. The spare 0.3Ω coil has a recommended wattage range between 32-40W. I would take these recommendations with a grain of salt, because they're generally rated at the upper limit of the coil, which will drastically reduce its overall lifespan. As I mentioned above, the 0.15Ω coil used in Smart Mode defaults to 65W. I'd suggest starting at 45W and working your way up.

So far, the 0.15Ω coil is holding up better than in previous reviews. I'm over 800 puffs into it, and it's still vaping like a champ.

From my observation, there really isn't much of a difference in how any of the PnP X coils vape, other than the wattage being used. I have not tested the 0.6Ω coil, so cannot comment on its performance. The flavor output of the 0.15Ω, 0.20Ω, and 0.30Ω coils are all fairly outstanding, so there are no complaints there. If you do notice a slight burnt taste, dial the wattage down 5W and that should go away. Note that the flavor output and vape heat will decrease the lower that you continue to go.

Included in this kit is a PnP X coil compatibility chart which tells you which coil resistances work best in which tank (DTL or MTL) and the PG/VG ratios they're meant for. Another important thing shown on this chart is the recommendation to use freebase, salt nic, or either or. DL/DTL devices should rarely be used for salt nics or freebase nic concentrations higher than probably 12 mg/mL (1.2%) unless you really know what you're doing. This little chart is a great source of information for a beginner vaper.


VooPoo-Argus-Pro-2-Pod-Features.jpg



The PnP X pod uses top airflow which is a great choice for leak prevention. Any tank with the airflow positioned at or below the coil is prone to coil leakage finding its way out through the airflow slots when the tank is positioned upright. With the new PnP X pod cartridge, you won't have to worry about this. However, you do still have to worry about leakage if the tank is lying on its side. So if I were asked if the new PnP X platform was purse-friendly for leaks, if the device finds its way laying sideways, I'd make no guarantees. So far, the pod has had very little leakage at all, and what little leakage I had was from the refill port, oddly enough. The amount of leakage seemed more residual than an actual leaking problem, so it was very quick to wipe up and clean.

The knurling along the top makes turning the airflow quite easy. There is no stop to prevent the airflow ring from continuously spinning, so try to get everything lined up as you like it before it gets dark out. As you can see above, it's fairly difficult with light to distinguish whether the airflow is open or not. I suppose you could always just stick your finger in the airflow opening to see if it's open or not, lol.

Like we've seen many times before with pod devices, the refill port is sealed with a rubber bung which is accessed on the side. The refill hole is large enough to easily fit a 120mL Chubby Gorilla bottle nozzle inside of it, and anything smaller should have absolutely no problem.

You'll also notice a little plastic tab sitting just underneath the surface of the refill hole. I've been noticing this more on pod tanks recently, but I believe this was done to help prevent bubbling at the hole which often causes overflow from water tension, before the tank fills up. Make sure the tip of the bottle nozzle is resting on this plastic tab so that it guides the juice into the tank, instead of back up into the hole. If this was in fact why a plastic tab was positioned there, this is very thoughtful and a huge convenience.



⇒ CONCLUSION ⇐


The results to all of my testing is that the VooPoo Argus Pro 2 is a solid kit. The flavor outputs of the new PnP X coils are quite good and I've experienced no leaking from any of the coils which is outstanding. The new pod mod designs we've seen with the Drag S2, X2, and now the Argus Pro 2 did away with ventilation holes inside the pod well which will certainly help contain messes if you do happen to experience leaking from the bottom of the coil or tank. One thing I wasn't impressed with was the battery % cutoff. Sometimes I see devices stop working due to low battery at 10% or 15% battery remaining at high wattages, but 25% at 45W? I'm sure this was an oversight, but it's hard to make claims of a big 3000 mAh internal battery when a quarter of it isn't able to be used.

In terms of ease of use, it really doesn't get any simpler than this for a pod device that isn't a stick/pen or stick variant. The fire ramp up is fairly quick, especially in Turbo Mode, and fairly consistent assuming you have over 35-40% juice left in the battery. Once the Argus Pro 2 reaches around 40%, the performance starts to drop off fairly drastically from there. It still provides a decent vape, but it's noticeably weaker until it no longer fires.

There are certainly far more pros with this kit than cons, so I'll give the Argus Pro 2 a thumbs up.


Pros:
> Pocket-friendly (purse-friendly if kept upright)
> No leaking whatsoever, so far
> New PnP X coils offer great flavor output
> Argus Pro 2 pod mod is easy to operate
> Zinc-alloy construction (for durability)
> Buttons are nice and clicky
> Plug and play pods
> PnP X pod cartridges are top airflow
> Airflow ring is easy to adjust
> Side refill port is mess-free
> No airflow vents in the pod well (easier cleanup if leaks happen)


Cons:
> Only 2200 mAh of the advertised internal 3000 mAh battery is reliable
> Mod still requires double-firing after auto-shutoff every 10 minutes or so


Considerations:
> Airflow position is somewhat difficult to see without proper lighting
> 510 drip tip is not removable (but looks to be in the MTL kit)



Overall Rating:
8.5



And that concludes this review on the Argus Pro 2 pod kit. I hope my observations helped in any decision-making you may or may not be doing about this product. I encourage you to check out the Argus Pro 2 page at VooPoo's site. You can also find more info on the PnP X Platform here. As of right now, VooPoo does not yet have this or the PnP X refill coils available for purchase on their site. You may be able to find the Argus Pro 2 at other participating vendors, though. If you have questions or comments, feel free to leave feedback or PM me. I appreciate anyone that has painstakingly read through any of my reviews in entirety. I'll be done soon, I promise. XD

Happy vape hoarding!
:rickroll:

Filter