I am looking for Dani 25 Dicodes mod. Serious offers please

"E-Cigarette Regulations from the FDA that are driving more of them into the black market; like many regulations at the FDA, which do not match any statutory authority that Congress ever gave to the FDA, are unconstitutional under the Major Questions Doctrine."

Login to view embedded media

Thanks to HealthCabin for sending me this product to review!
Check it out on their website:
Uwell Caliburn GZ2 Pod System Kit

Most of the time Healthcabin also has some discount coupon codes, so definitely check those out HealthCabin Coupon Center as well, to save yourself some money!

Disclaimer: This review is my own thoughts and I am not associated with anyone at HealthCabin, nor am I being paid to write this review.

Specs:

• Compatible with Caliburn G2 pod / coils
• Precise airflow adjustment
• Interactive breathing light
• Compact & Portable
• Dimensions: 28.9 mm × 22.9 mm × 72.5 mm
• E-liquid capacity: 2ml
• Max output power: 17 watts
• Battery capacity: 850 mAh

In the box:

• 1 × Caliburn GZ2 device
• 1 × Caliburn G2 empty cartridge
• 1 × UN2 Meshed 0.8 ohm Caliburn G coil (pre-installed)
• 1 × UN2 Meshed 1.2 ohm Caliburn G2 coil (spare)
• 1 × Type-C Charging cable
• 1 × User Manual

Design
The device comes in six different colors, which are shown in the image above. They all have a sleek aluminum body with the back plate being black, giving it a sleek and subtle appearance. The device is very short, with it only being just over 7cm tall. You can fit the entire thing in just one closed hand, making it very comfortable to hold while vaping it.
The device has a pulsing RGB light on both sides, it breathes from green to blue to red when taking a hit. The color the lights show first when you start vaping, indicate the battery percentage.



Pods and coils
This was my first time using a device that used the G pods/coils, and I have to admit: I was a little scared about it. I'd always heard a lot of mixed opinions about it. My experience however was very good; I was really pleasantly surprised. The flavor from these coils is good. Better than a lot of pod systems out there. The airflow control on these pods is accurate. Something you don’t see on the outside of the device, but really makes a huge difference when vaping it.
I really love that you can replace the coil, instead of having to replace the entire pod. I tend to prefer this, cause in most cases it’s cheaper, but especially because it has less of a bad impact on the environment.



Performance
I really love that Uwell made the battery bigger for this new Caliburn line. I always loved vaping caliburns, but my biggest reason not to was because one device wouldn’t get me through a full day. This device does just that.
The device vibrates when I put the pod into the device, but not when I take it out. While performing both of these actions, the RGB lights on the side light up in the color representing the battery level (green = 100% - 60%, blue = 60% - 30% and red = 30% and below).
To me the device is probably strictly an MTL and with the 0.8 ohm pod maybe also an RDL device. Definitely not meant to be a DTL device, more targeted to that tighter draw.
I didn’t experience major leaking, just a tiny bit that would cause the pod to have a little bit of liquid on the sides and bottom sometimes. Because it was so little, it didn’t really bother me that much. It didn’t impact my vaping experience in a bad way.



Pros

• Bigger battery than previous caliburns
• Top fill
• Good flavour
• Airflow adjustment
• Replaceable coils
• RGB lights on the sides
• Comfortable mouthpiece
• Haptic feedback (vibration)
• Quick charge
• Very compact
• Autodraw

Cons

• A little bit of leaking here and there

Verdict
I found the GZ2 to be a really good pod system. I’d definitely recommend it as a device. Its design is cool, it’s very small, comfortable to hold, carries a relatively large battery and it’s super easy to use. The fact that it’s compatible with all G coils seems to make sure that you will always be able to find coils that fit for the device, or at least for a very long time. The battery keeps it going for about a day and despite the little bit of leaking there was every once in a while, that really didn’t impact the overall vaping experience. In my opinion, this is definitely a good choice as a budget-friendly starter device.



Another big thanks to Healthcabin.net for sending me this device and a big thanks to you reading this for making it to the end of this review!

SMOK Novo Master Kit

Novo Master Kit is the taste master, deliver on taste appeal and consistency with a range of streamlined configurations. Two modes are designed to fit your different needs: Boost Mode (suitable for those who chase for the intense taste), Standard Mode (suitable for those who are content with the mild taste). It has 1000mAh battery, and 30W max. There are two ways to vape: Button triggered, Auto draw. LED indicator design shows you the real-time battery power. In addition, Smok Novo Master Kit comes with the functions of childproof lock, top filling system, leak-proof design and stepless airflow control. SMOK Novo Master is compatible with Novo/Novo 2/Novo 2X pods.

Details:
1. 30W boost mode & standard mode
2. Stepless airflow control
3. Top filling, leakproof design, childproof lock
4. 1000mAh integrated battery
5. LED indicator, button or auto draw
6. Compatible with Novo/Novo 2/Novo 2X pods
7. Pod detection, short circuit protection, 7s cut-off, low-voltage warning




SMOK Novo Master Box Kit

Novo Master Box Kit features handy-sized form and hanging hole design to be compact and portable. It is powered by a built-in 1000mAh battery with 30W max and 1.4A Type-C charging. You can double click the power button to choose boost mode for intense taste or standard mode for mild taste. With the LED indicator design and intelligent detection, it can help you to better understand the device status. It is also designed with button/auto draw and stepless airflow control. In addition, it is compatible with Novo/Novo 2/Novo 2X Pod Cartridge that features 2ml capacity, easy top filling and leak-proof design.

Details:
1. Handy-sized form, small and compact
2. Stylish and exquisite, attractive and eye-cating
3. Hanging hole design, convenient and portable
4. Built-in 1000mAh battery with 30W max
5. 1.4A Type-C charging for longer vaping
6. Boost/standard mode for intense/mlid taste
7. LED indicator to show the battery status
8. Supports button/auto draw system
9. Stepless airflow control system/li>
10. 2ml capacity, esay top filling system
11. Leak-proof design, no worries for leakage
12. Fit for Novo/Novo 2/Novo 2X Pod Cartridge
13. Intelligent detection to konw device status better

The Osiris 30mm RTA is a new rebuildable tank atomiser, and one of two bearing the same name from the folks over at Vaperz Cloudz.

CHAPTERS

00:00 - Intro and specs
01:00 - Close Up
15:00 - Vape
18:00 - Thoughts

Social Media - Vaping With Vic(vapingwithvic)'s Favorite Links - Linktree

Rumble - Login to view embedded media
YouTube - Login to view embedded media

DRAGBAR B3500 Disposable Kit Review



I have been noticing of late that there seems to be more and more prefilled disposable kits coming out, with some “smart” features on them. And by that, I mean having an indicator of battery life and e-liquid capacity remaining.

This new kit from Voopoo/Dragbar is one of those, the Dragbar B3500!

I previously reviewed the ICEWAVE X8500, of which this new Dragbar really reminds me of in features and appearance, including these smart features.

But before we get into it, here’s a quick rundown of its specs:

• Dimensions at around 77 x 42 x 26 mm. It’s a little on the thick side but easily fits the palm of my small(ish) hands, making it very handy and ergonomic.
• 500 mAh battery.
• Features an updated mesh coil with a resistance of 1.0 ohm.
• 8 mL of e-liquid capacity, for up to 3500 puffs.
• Has a USB-C port at the bottom for charging.
• As for smart features, it has a big digital LED screen that displays battery life and remaining e-liquid capacity.

The plastic shell is transparent, reminiscent of the “jelly” pod kits we’ve seen in the last year or so. This shell gives a view into a patterned and colourful inner body with kit and flavour information. The flat mouthpiece is comfortable, with a shape that accommodates the lips.



There is no airflow control, but the device gives off a just-right medium and warm-ish MTL vape, which is quite nice especially with the iced flavours. Air intake is from a small (~1 mm) hole at the base, going to the coil and out through the mouthpiece. The bottom is also where the USB-C port is located.



The Dragbar B3500 is a plug-and-play device; just take it out of the pack and vape away! There are no buttons for customisation or operation, making its operation very simple.

The front of the device features the large LED screen which lights up with every puff to show battery life (in percentage) and e-liquid capacity (in coloured diminishing bars) left in the kit. Of course, with this helpful screen, it was quite easy for me to estimate how long it would take for my device to charge and if the e-liquid remaining can last me the whole day!



The Dragbar B3500 comes in 16 flavours, with the following sent to me for this review: Strawberry Kiwi, Strawberry Banana, Fresh Mint, Vanilla Casta Tobacco, and Blackberry Ice.

Vanilla Casta Tobacco gives the taste of sweet tobacco with mint, and Fresh Mint is quite sweet on the tongue although too minty for someone like me. Strawberry Kiwi, Blackberry Ice, and Strawberry Banana are my picks of the lot I was sent with their nice fruity flavours that are well-balanced between sweetness and cooling.

Final Thoughts:

As a mid-puff prefilled disposable, you can’t really go wrong with choosing the Dragbar 3500. These devices give amazing flavour that are consistent with each puff. The smart features also hook me in, particularly because I will be using this device a good week or so, with the way I vape and its expected puff life.

My sincerest thanks again to Voopoo/Dragbar for allowing me to review these products!

Hi fellow Vapers,
I recently returned to vaping after a 3 year sebatacle in which I foolishly returned to smoking hand rolling tobacco. I still had my awesome Geekvape Legend 2 which I purchased from China 5 years ago but it is bulky for on the go vaping. I wanted something single battery, smaller and lighter in weight but good quality and reliable. After conducting weeks of researcha and reading reviews and getting ever increasingly bamboozled and confused I whittles it down to the Argus XT kit from a supplier named E-Cirette Ireland (I will speak very highly of these, awesome company & support).

Package was received 24 hours after order, and the unboxing was pleasurable and the mod did not dissappoint, nor did the tank.

I will start with the tank, the UForce L. This was my first experience of an 810 drip tip which took a little getting used to. I ordered the 0.8ohm PNP-R1 Coils on the advice of the retailer to get me started. I then switched to 0.8ohm PNP-TM2 Mesh coils to try them out. After initial leaking issues, I discovered that you need to close the air vent and allow the device to cool right down. However, the R1 coils still had a tendency to leak much more than the TM2. The air vents are on the ring just below the top and it is not possible to close completely, a minor design flaw. The flavour was awesome and it was the first time I got the proper flavour of an e-liquid. I previoulsy used the Nautilus 2 & 3 with 1.8ohm coils. Good tanks but lack of experience I was clearly not getting the best out of them. I digress. In a nutshell, the UForceL is a great tank.

Now the mod, the Argus XT! It started out great. The SMART mode is set by default but in the settings you can switch this of and select a user defined setting. The smart mode detects the appropriate coil wattage for the inserted coil. There is a 3 point switch just above the fire button to a) Lock device completely, b) allow you to change wattage and fire & c) lock the wattgae but allow you to fire. Brilliant and 1 of the features that drew me to the unit. It is IP68 rated which also drew me and it couls run on 18650 up to 21700, another selling point. It was sturdy, very well built and oozed quality. Everything worked fine for the first few days until the issues started.

Because I am a heavy vaper, I was using 2 tanks. The UforceL and my nautilus 2. I would rotate. 0.8ohm (12-18w) on the Uforce, 0.7 (15-30w) on the Nautilus. All went well for the first few days. It would auto set the wattage to 15w for the 0.8 and to 25w for the 0.7. Great, I did fiddle a little within the limits to see what was the best flavour profile but to be fair, it was bang on. The first issue started after a few days, it would occassionally not detect that I had changed from 1 to the other. Not a problem, I thought. Just a glitch with the chipset. After about a week, It started locking when I tried to fire while it was in position C (wattage lock but can fire). I tried flicking the lock switch and it seemed to work initially. When that stopped working, I then resorted to removing teh battery for 30 seconds and replacing and this seemed to work briefly. Over the coming days, the issue got worse. To the point where it was becoming unusable. I searched the auld interweb and discovered a few posts on this exact issue. The earliest about 9 months ago on Reddit. One of the recommended solutions was to switch the SMART mode off and go to the user defined setting which I did. Again, this seemed to fix the issue until......

After exactly 14 days, I awoke and tried to vape and the device would not fire no matter what I tried. I was more than a little annoyed. I went online in search of a fix and again returned to the Reddit thread and found that Voopoo were aware of the issue and, some months previously, had issued a firmware fix to disable the lock permanently. This was not something I was happy to do for a number fo reasons. This was an expensive mod. I've had devices brick on me before trying to update frimware and this fault did not instill confidence in me and their software/device. I decided I wanted to return the device for a refund. I contacted the supplier (E-cirette) and they were brilliant. Told me they were aware of this issue with the device and agreed to the return and refund.

I am unhappy with Voopoo. This was my first Voopoo device. I have previous experience with Aspire, Innokin and Geekvape. I have had no issues with any of them. They have been aware of this issue for the better part of a year and yet continue to retaIl this device with the known fault at the original retail price. Their repsonse is to issue a firmware update for which users would no doubt have to accept responsibility for if anything went wrong. The physical lock switch was mentioned and complimented on every review I watched and highlighted as 1 of the main selling points. It is inconvenient to have to go through the returns process as I now have to wait up to 14 days my refund.

That is my honest review and I hope it helps someone in their decision making process.

Hi guys,
Can anyone tell me which you would recommend for a 1st time DIYer, an RTA or an RDTA? I vape a lot and like large tanks. RTA's seem to have the largest tanks, although a few RDTA's do have decent sized tanks or are expandable.

Looking for maximum flavour. A single or dual config for later experimentation. Which 1 leaks least and is better for MTL, flavour. Am using 70vg/30pg at the minute with 3 or 6mg of nicotene. Planning to cut out nic before xmas, hopefully.

If you could recommend a few, I would appreciate it. I was looking at the Hellvape Fat Rabbit or Hellvape Rebirth with Mike Vapes but have recently discovered Hellvape are allegedly ripping off peoples ideas and designs which I am not a fan of and would prefer not to support companies doing this.

As always, thanks for any advice!

I can't understand blinking. New battery, never used! Help!
Is there a guide??
I have 15 second videos to see what it's doing.

Hi, I'm new to these forums but i decided to give it a shot anyway. I've had this tank for around 4 months or so and been making my own coils without a problem.
Recently it started behaving weirdly tho, I put in the 3 coils, tighten everything up and my vape displays 2.5 - 3ohms instead of the expected 0.3ohms. At 140 watts the coils are barely producing any vapor, even if at this wattage the coils should be making it like crazy. It's not an issue with my vape by the way, i've put it on another vape of mine and it was still reporting the same ohms.
I would appreciate if someone could help me out on this one. Cheers everyone!

The LAFILAFI Qbox 8000 is an innovative high-capacity disposable e-cigarette device designed to provide hobbyists with a convenient and long-lasting e-cigarette experience. This product is popular among those looking for a hassle-free and portable e-cigarette solution that does not require refilling or recharging.



Key features:

• 12ml Pre-Filled E-Liquid

• 600mAh rechargeable battery

• 5%(50mg) Nicotine Strength

• Mesh Coil

• Adjustable Airflow

• USB Type-C Charging (cable not included)

• Approximately 8000 Puffs

• Draw-Activated

• MTL Vaping

As the latest product of LAFI, the first to be increased in capacity, 12ml Pre-Filled E-Liquid can last about 8000 puffs and is powered by a built-in 600mAh battery to ensure continuous output of delicious.

The newly added function of airflow adjustment, on the basis of continuing the convenient use of disposable vape, supports a customized experience, both novice and old players can be satisfied.

LAFI Qbox 8000 not only continues the brand's consistent gorgeous style in appearance but also improves the hardware of various products, which is a choice worth trying. Don't worry about the purchase of new products, you can buy vapes online, quality service and easy logistics will not let you down.


More kits you will like：

pynepod 8500
elf bar bc5000 ultra

Unveiling the evod 4 in 1 vape, the all-encompassing solution to all your vaping needs. With its multifunctionality, it provides a versatile vaping experience that caters to all preferences. Enjoy a product designed with precision and care to offer an unmatched vaping session each time.

Indulge in the marvel of the esco bars mesh 2500, where innovative mesh coil technology meets premium flavor delivery. Experience heightened taste sensations with each puff, making your vaping experience incredibly smooth and truly marvelous. Step into a new era of vaping with a gadget that is both a powerhouse of flavor and a pioneer in technology.

Dive into the unique and invigorating world of esco bars h20. Every puff promises a wave of satisfaction, ensuring a vaping experience that mirrors the freshness and vitality of the ocean. Discover an ocean of flavors waiting for you in each device.

Are you ready to take your vaping experience to new heights? Look no further than the Geekvape Peak Pod Kit. Geekvape has long been a trusted name in the vaping industry, known for their innovative designs and exceptional quality.



With the Geekvape Peak Pod System Kit, they've once again raised the bar and delivered a device that's sure to impress both newcomers and seasoned vapers alike.

Key Features:
Compact and Stylish Design: The Geekvape vapes Peak is not just a high-performance device; it's also a stylish accessory. With its sleek and compact design, it fits comfortably in your hand and pocket, making it perfect for on-the-go vaping.

Impressive Battery Life: Don't let the size fool you; the Peak is powered by a high-capacity battery that ensures you have plenty of power to vape throughout the day without constantly worrying about recharging.
Intuitive LED Display: The built-in LED display provides real-time information about your battery life and wattage, allowing you to customize your vaping experience to your liking.

Leak-Proof Pod Design: Geekvape understands the frustration of leaks, which is why they've designed the Peak's pods to be completely leak-proof. Say goodbye to messy cleanup and wasted e-liquid.

Exceptional Flavor: The Geekvape Peak uses advanced coil technology to deliver intense and satisfying flavor with every puff. Whether you prefer mouth-to-lung or direct-to-lung vaping, the Peak has you covered.

Multiple Coil Options: Geekvape offers a variety of coil options, allowing you to tailor your vaping experience to your preferences. From tight draws to airy clouds, the Peak can do it all.

The Geekvape Peak Pod System Kit is a game-changer in the world of vaping. It combines style, performance, and reliability into one impressive package. Whether you're new to vaping or a seasoned pro, the Peak is sure to become your new favorite device. Elevate your vaping experience with Geekvape's Peak Pod Vape Kit today!

Other kits you may prefer:
smok novo master box
lost vape ursa nano 2

Step into a world where affordability meets quality. The cheap hyde disposable vape collection offers a rich array of flavors, each promising an exhilarating vaping experience without breaking the bank. Explore the range now and find your perfect match!

Step into a world of premium vaping solutions with the elfbar collection. Tailored to suit different preferences, this array promises an elevating experience with every product you choose. With a blend of quality and diversity, your satisfaction is a guarantee.

Step into the future of vaping with the hyde x disposable 3000. Boasting a sleek design packed with 3000 puffs of rich and flavorful vapor, this device is created for the discerning vaper who demands both style and substance. Explore a richer vaping experience with this premium device that is as elegant as it is powerful.

What I want to bring to you today is a simple and stylish device, the smok novo master kit. This pod kit uses a 1000mAh battery for battery life, which can basically last 1-2 days of use.

It has a 2ml e-liquid capacity and is perfectly compatible with smok novo pod/smok novo 2pod/smok novo 2x pod. E-liquid can be filled through the top. It also greatly reduces the risk of oil leakage.

This device uses a dual activation method, which can not only be activated by inhalation but also activate the device by pressing a button. In addition, adjustable airflow can help control the airflow more accurately, making the inhalation method more comfortable.

Novo Master Kit also has two modes, one is boost mode and the other is standard mode. Whether you want a rich or soft taste, you can get it by adjusting the mode.

You can get more related product information in our online vape shop.

What's more:
voopoo h40 price
caliburn g3 vape

Geekvape Peak Kit is a product with sensual design and soft tones. featuring precise adjustments for airflow and high-capacity battery, a Type-C charging port, 3-level output adjustment and precise airflow adjustment. As a pod kit, Peak Kit can hold more vape juice thanks to the 4ml pod cartridge. Paired with a powerful 1300mAh battery, Peak Kit can work for 2 days with one full charge.



Battery: Built-in 1300mAh
Pod Capacity: 4.0ml
Top Filling System
3-level Output Adjustment
Charging: Type-C Port
For MTL and RDTL Vaping
Operation: Draw-Activated
Precise Airflow Adjustment
VPU Technology for Better Flavor
...

Click here for more:

Geekvape Peak Pod Kit: Geekvape Peak Pod System Kit

The bottle does NOT hold 10ml. I had a 30 ml unicorn bottle that was about 1/5th full and a bottle that was so empty it was pumping air and it just about filled it. That’s nowhere close to 10 ml. Closer to 5 than 10.

I'm glad I had my account login saved from this place, but now I remember what I went through last time I started new. SO much information my head is spinning.
I quit smoking about 10-12? years ago by vaping, was off the smokes for 3 whole years, then fell off the wagon (don't worry, I kick myself plenty every day). I've decided this has to be done so... here I am again.
I don't even know what to try first. I've copped a couple of those throw-aways at the vape shop and they are just terrible.
My go-to years back was a Provari (which I still have) with a Kanger pro tank using Apollo Ry4 (thats the only one I purchased and liked, but could never replicate well). Now it looks like their website is gone, right along with Provari... what a bummer.
I've done some reading and sounds like salt nic (this is a new thing since I disappeared) isn't really for me. I'm more of a mechanical addict than anything else. So my game is volume, not strength.
Anyway, do any of you old heads who remember the Kanger Pro tanks (the original) have a recommendation on something that hits about like that with roughly the same draw? I like lightly restricted airflow... and I don't do direct lung hits. And what about a comparable juice to the old Apollo Ry4?
I also used to have my own overgrown lab with hundreds of flavors, but I don't think I want to get that deep into the weeds again, I have too many other hobbies.
I'm thinking a pod type rig is probably best for me, I don't want to go back to the big tanks and mods, I don't want to fight building coils anymore either. I would prefer something with a button trigger instead of draw activated, but I'm not finding anything with just wild googling.
And what a terrible thing to find that FastTech is gone as well. Maybe thats a good thing though, I spent way too much money at that website.

anyway... my first step toward quitting was this post, I just need to gather supplies and get that sorted out so I can take the leap. Suggestions are warmly welcomed!

I’ve always bought my liquids from a company called Best Ecig. I need to order some more and typed in the company and its

Uwell Caliburn G3 Pod Kit

Caliburn G3 Kit is the greatest pod system among the Caliburn series ever before. It brings an impressive upgrade compared with G2. Featuring 0.6ohm and 0.9ohm coil, it supports RDL, loose MTL and tighter MTL vaping. Equipped with integrated coil cartridge, Uwell Caliburn G3 ensures an air-tight environment for enhanced leak endurance, and delivers a leak-free, mess-free & hassle-free vaping. Caliburn G3 Kit is the first pod system among the Caliburn G Series featuring an OLED display. There are three modes for you to fire it: trigger button lock mode, auto draw on and both on. Uwell Caliburn G3 Kit comes with 900mAh battery, side filling system and 2.5ml pod capacity.

Details:
1. Supports RDL and MTL vaping
2. Integrated coil cartridge, air-tight refill mechanism
3. 900mAh built-in battery
4. Three firing modes: trigger button lock mode, auto draw on. and both on
5. OLED display, side filling
6. Dual airflow system
7. Pro-FOCS Technology




GeekVape Z Fli Tank

Z Fli Tank of 5.5ml capacity features a flip top cap for easy refilling. It adopts top airflow design to ensure the leakage-free experience and provide exceptional taste. Compatible with GeekVape Z Coil with double service life, it can bring you long-lasting vaping experience. Just get it.

Details:
1. Flip top cap, simple to use
2. 5.5ml capacity, easy top filling
3. Precise airflow control system
4. Top airflow leakproof system
5. Supports 810 drip tip
6. Fit for Z Coil/Zeus Dual Glass

These tests below only note my personal opinion for the ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This can be one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. Never use them outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous discharge rating (CDR), never let it get colder than 0°C or hotter than 60°C, and keep the plastic wrap and top insulating ring in perfect condition. Never use a battery that is physically damaged in any way.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
This is a great performing cell for high power applications, beating the Samsung 50S and Molicel P42A at 30A. It doesn’t do as well as those cells at low to moderate power levels though. The Molicel P45B beats it at all power levels.

The T39 has a very low DC internal resistance (DC IR) so its voltage at the start is about as high as the Samsung 30T and Molicel P45B, making it a good choice for mechanical vaping devices where the cell can be recharged often (it “hits hard”).

Its continuous current rating seems to be in the 30A-35A range but like all cells I recommend not running it at/near its rating in order to extend cell life and reduce voltage sag.

There is a 50A “max” current rating on the wrap but there will be a lot of voltage sag at this level and you can’t run it for very long this hard. Don’t let the cell get over 60°C.

This cell looks a lot like the Lishen LR2170LA but it performs differently. The T39 is worse at 10A and better at 30A than the LR2170LA’s I tested. Their top contact structures are identical so it could be a Lishen but I don’t know for sure.

This cell has two plastic top insulating rings, which is great if you have a device that is rough on cell wraps and top rings. But this cell is about 70.7mm long, even longer than a Molicel P42A, and might not fit in devices that are a snug fit for Molicels. Its diameter is about 21.2mm.

The two cells I tested delivered 3968mAh and 4007mAh. This isn’t very good consistency but it is above this cell’s 3900mAh rating.


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic



18650 Ratings and E-Scores Table:


20700/21700 Ratings and E-Scores Table:

I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Patreon.

To see how other cells have tested check out this link: Links To All 21700, 26650, 18350, 18500 Battery Tests