Another look at Lost Vape, which after a long series of pods and box mods, dives back into the AIO scene. After trying their hand at a BB-inspired model, this time they follow the trend that currently dominates the AIO world: an ultra-open design aimed at tackling the most annoying issue around — condensation. The Lost Vape Centaurus G80 AIO is being offered for free by HealthCabin, with no money being exchanged or employment relationship involved.



Measurements of 82 x 31 x 48, 116 grams is the weight without the battery, with one of the two inserted it reaches approximately 150 grams. Aluminum for the body, PCTG for the panels.
Inside the box, you basically get everything: the Centaurus G80 AIO, two drip tips, a key tool to unscrew the nut, a bunch of spare o-rings, a USB Type-C cable, a chimney reducer, user manual, and warranty card.



The first setup lets you run the G80 with stock coils, using an empty UB AIO pod, a UB Ultra M7 0.2ohm coil, and a UB Ultra M8 0.15ohm coil.
Then there’s the rebuildable section, including a Centaurus Boro tank paired with its RBA, two extra airflow pins (plus one pre-installed), a screwdriver, and a base to help you prep your first build.



The top section features a reinforced metal plate to strengthen the structure of the Centaurus G80, secured by four screws and engraved with the Centaurus logo.
You’ve got two nut options here. The first one includes a standard 510 connection, letting you use any drip tip with a 510 base — from the included ones to your favorite RTA tips. It comes with two slots so it can be easily removed using the provided tool.
The second option is a nut with a built-in drip tip, more geared towards a flavor-focused experience.



As for the bottom, it’s wide and very stable — even more so than the B80, which already had solid footing due to its weight. It’s secured by four screws and marked with CE, disposal symbols, and “designed by Lost Vape”. Just like on the B80, Lost Vape makes it clear they’re not keen on battery recharging directly in the device — the USB Type-C port is placed on the base as a subtle hint.



The battery door is made of PCTG and snaps onto the frame via magnets. Its design features several slots. Not enough to fully show off your battery wrap — as the AIO trend goes — but it does block out most of the grime, keeping the battery compartment cleaner.



The battery bay is quite roomy. Just a few extra millimeters and it could probably fit 21700s. The extra space is clearly intentional, making it easy to insert and remove 18650s. For aesthetic reasons — since the battery area is partially visible — Lost Vape even skipped the usual pull tab that's on every box mod I've tested from them, including the Centaurus B80. The spring-loaded gold-plated contact is very flexible, making battery removal easy. The battery is inserted positive side down, as indicated.



The front panel is made from polycarbonate, the same material used in Lost Vape's full-body P and N series boxes (P200, N100, N200). They're clearly confident in its durability — my Centaurus B80 panels are still crack-free after a year and a half, just with a few surface scratches. On the G80, Lost Vape went for a “diagonal striped mechanical” look: 5 cutouts on each side and the front to reduce condensation and ensure airflow even if part of the intake gets blocked when gripping the mod.



The fire button is placed on the top side — ideal for thumb firing, especially for users like me who feel that some AIOs are oddly laid out for right-handers or are actually more comfortable for left-handed vapers. The button itself is quite large and satisfying.



The dual spring-loaded contact system, previously seen on the B80, is back. Similar to what you'd find on pod mods, it ensures accurate readings even with third-party boro tanks, not just the two included with the G80. The OLED display is just 0.42 inches.



As for the chipset — I haven’t seen confirmation that it’s the usual Lost Vape Quest chip, but functionality-wise, it’s basically a stripped-down version of the one used in their main box mods. The small display size obviously limits the information shown: battery icon, wattage, a 4-digit puff counter, and coil resistance. Wattage can be adjusted from 5 to 80W.

Controls:
- 5 clicks on the fire button: power on/off
- 3 clicks on the fire button: switch between "smart" mode and RBA mode
- Fire + "+" button: locks the wattage buttons (fire still works)
- Fire + "−" button: resets the puff counter

Minimal chipset, offering just two modes: Smart and RBA. The difference? In Smart mode, the device auto-sets the wattage based on the coil's resistance. RBA mode, on the other hand, doesn't feature the kind of "boost" you'd find in Lost Vape's box mods — that fine-tuned regulation designed to better handle complex coils is absent here.



The first setup option for the Centaurus G80 is the UB AIO pod (on the right) — a "structure" designed to support (some of) the UB Ultra prebuilt coils. The one included in the G80 kit is made of transparent PCTG, though a smoked version is also available aftermarket. All versions, including the stock one, hold up to 5 ml of e-liquid. A key selling point here: no need to mess around with swappable pins or settle for fixed airflow — the draw is adjustable via a dedicated airflow ring.
The refill port is sealed with a silicone plug that fits chubby bottles too. It might be a bit stiff at first, but loosens up with use and becomes easier to handle.
The UB Ultra coils are press-fit, so be gentle when installing them. Even though the base around the coil port is decently thick, it's still PCTG after all.



Coil offering mirrors the one found in the B80 kit, giving you three UB Ultra mesh coil options:

- M8 – 0.15 ohm (60–80W) → Included in the kit
- M7 – 0.2 ohm (40–60W) → Included in the kit
- M6 – 0.3 ohm (30–40W)

Realistically, you're only getting two usable coils, since the M8 is a bit too much to handle with a single 18650. Once again, the more reasonable and interesting M6 isn’t included. The M7 gave me the same impression it did back in late 2023 — a solid flavour coil for a pod that benefits from a 5 ml capacity. It responds quickly even at 37–40 watts, and with a good 18650 battery, the runtime is definitely acceptable.



The second, much more customizable option is the Centaurus Boro Tank with its dedicated RBA. Also made of transparent PCTG and with a 5 ml capacity, it can be refilled either via the top plug or — my preferred method — from the bottom, which is more convenient and forgiving even if your wicking isn’t perfect. There's also a tiny notch on the PCTG body to help with removal, which doubles as an indicator for the correct insertion direction.
When taking it apart for daily use, the upper chimney section is connected to the chimney/chamber combo through threading and an O-ring, while the chamber and the deck have no O-rings in between.



The deck is pressure-mounted onto the metal base, and the seal is maintained by O-rings — same goes for the entire PCTG structure.
In more advanced usage, you can remove the airflow pin or use the base to fire up the coil during setup. The airflow pin and positive pin are a single gold-plated piece, available in 1 mm, 2 mm, and 3 mm sizes, held in place with threading. Unscrewing the pin will also release the positive post — so make sure to handle this step carefully, especially if you've already installed your build.



Parallel posts, flathead screws, and the airflow pin sits flush with the deck. It features dual wicking slots where cotton should be laid following the usual rule: no stuffing, no floating ends — otherwise pressure will shift the cotton and you’ll end up with leaks.
This atomizer leans toward an open MTL with the 2 mm pin, or an RDL draw using the 3 mm. The 1 mm pin, as I mentioned in the B80 review, feels more like 0.9 mm and is honestly forgettable. It handles creamy, fruity, mentholated, and flavored tobaccos well. For NETs, I'd probably look elsewhere.



This is a kit that floods the user with options. One mod, one stock coil atomizer, and one RBA with boro compatibility — each would cost you no more than $15 if bought separately. Plus, you get free drip tips, two coils, and a bunch of accessories. If you're looking for a budget-friendly AIO for travel, or just want to dip your toes into the AIO world without breaking the bank, the Centaurus G80 is a solid choice. You get the full picture, both with prebuilt coils and the included RBA — just like I did with the B80 kit from Lost Vape, which taught me the ups and downs of this whole AIO scene.

The Lost Vape Centaurus G80 AIO is available on HealthCabin along with coils and accessories: https://www.healthcabin.net/lost-vape-centaurus-g80-aio-pod-mod-kit-p/30074.html

I thank HealthCabin for making the Lost Vape Centaurus G80 AIO available for free, and the e-cigarette forum staff and community for the space.

These tests below only note my personal opinion for the ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, EVE, Lishen, BAK, or Sanyo can change at any time! This can be one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. Never use them outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous discharge rating (CDR), never let it get colder than 0°C or hotter than 60°C to help lower the risks and extend cell life, and keep the plastic wrap and top insulating ring in perfect condition. Never use a battery that is physically damaged in any way.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.

C


Test Results
YOU USE THESE CELLS AT YOUR OWN RISK! We do not know for sure if these are actually EVE 50PL’s.

These are allegedly pre-production samples of the tabless EVE 50PL but might be “rewrapped” (not in factory wraps) since “EVE” is on all their other cells but not these. These have the same bottom laser-welding spiral as the 40PL though.

There is an unconfirmed rumor that the EVE 50PL has a short cycle life due to it being created for use in military drones. This is where absolute max performance is critical and compromising that to ensure decent cycle life isn’t needed.

I don’t know if this is true or not but if you use these cells and feel their performance “fades” faster than than expected please let me know. I did some preliminary cycle life testing and didn’t see any fast degradation though.

Just for reference…the Ver. A datasheet for the EVE 50PL has no cycle life spec. The 40PL’s Ver. A datasheet does. Pajda, a highly respected tester at the Endless Sphere forums, and I will be testing cycle life but that can take up to a couple of months to finish.

On to performance…at 20A and higher this cell equals or beats any other small round cell I have tested. At above 20A, up to 50A continuous, this is the best performer I’ve ever tested. Check the Ratings & Performance table for the numbers (link below).

I’ve done a 40A and 100A continuous “shootout” against the other top four 21700’s but the results are Patreon-only.

If this cell does have decent cycle life then the performance could definitely make buying this cell worth considering.

Thank you DIY500AMP.com for donating cells for testing!

Some specs and observations…

• Datasheet capacity specs are 4800mAh Minimum and 5000mAh Typical.
• The five cells I tested measured 4985mAh-5011mAh with an average of 4994mAh, just below the Typical spec. Not great consistency but okay, especially if these are pre-production cells. Considering the differences in equipment I consider these cells to be meeting their spec but would prefer to see them hit around 5100mAh like many cells from Samsung and others would (for a 5000mAh-rated cell).
• DC internal resistance was 6.4mOhms to 6.9mOhms for five cells. This is decent consistency.
• I estimate its current ratings to be 50A continuous with a 125A temp-limited (to 80°C) non-continuous rating. Never let the cell go above 80°C at any time if using a thermocouple for temp sensing or above 65°C if using a thermistor (which are VERY slow)! This includes the temp rise that can still occur after a high power discharge has stopped
• Standard charge rate 2A, max is 10A but I am sure that will shorten cycle life.

Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic



18650 Ratings & Performance Table:


21700 Ratings & Performance Table:

I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Get more from Battery Mooch on Patreon.

Hello and welcome back for another review. This time I will be taking a look at the Hellvape Dead Rabbit Mini RDA that was sent to me by Hellvape in order to provide you with a fair and honest review. The Mini has a postless single coil build deck and four MTL style airflow holes. It is a small rda as the name suggests and is only 20mm in diameter but includes a 22mm beauty ring to add to the appearance when using on mods with larger bases. I’m a big fan of single coil rdas so am really looking forward to testing this one. I’m guessing that with the small size that the flavor should be intense.





WHAT’S IN THE BOX?

• 1 Hellvape Dead Rabbit Mini RDA
• 1 Beauty Ring
• 1 0.45ohm Ni80 Clapton Coil
• 1 Shoelace Cotton
• 1 BF Pin
• 1 Coil Cutting Tool
• 1 Extra 510 Drip Tip
• 1 Accessory Bag
• 1 User Manual

SPECIFICATIONS:

FEATURES:

• DIMENSIONS: 20mm Diameter
• WIDEST POINT: Optional 22mm Beauty Ring
• AIRFLOW: 4 MTL-Style Airflow Holes
• TANK CONNECTION: Threaded 510
• TANK MATERIAL: Stainless Steel
• DRIP TIP: 510 Drip Tip
• 22mm Beauty Ring
• Extra 510 Resin Drip Tip
• BUILD DECK: Postless Design
• COIL CONFIGURATION: Single Coil Design
• Side Secured via Screws

INITIAL THOUGHTS:

The packaging for the Dead Rabbit Mini RDA is much like we’ve seen from Hellvape before. The front is orange and black with the Hellvape logo and name in the top right corner and the device name along the left edge. One thing that is new from the usual packaging is that there is a clear window in the front so you can see the rda without opening the box. Underneath the rda is the RDL designator. The back of the box a list of features, a list of contents and company information. There is also an authenticity code and a bar code with the name of the rda and the color of the tank inside.

Once the box is opened then the Dead Rabbit Mini RDA is visible and has a nice drip tip installed which has the Hellvape name on it. Also visible is the included beauty ring and spare drip tip. It’s nice that the beauty ring is included which takes the 20mm base of the rda up to 22mm and increases the aesthetic of the tank. Once installed it is barely noticeable that it is not part of the rda since the color match is exact. There is also a box above the Mini which includes all of the accessories which include a coil cutting guide, a bottom feed pin, screw driver, allen wrench, a single .45 ohm NI80 coil, a single cotton thread, spare o rings, and spare grub screws. Underneath the box and foam insert is where the user manual is located. I was sent the blue and gunmetal versions for my review.

As always, the first thing I did was disassemble the rda and give it a bath in some hot soapy water to remove any machining oil or debris that might be left on the rda. I also included the beauty ring for no real reason. As you can see in the picture below, the drip tip has double o rings to hold it in place securely.

The bottom of the base has the Dead Rabbit Mini RDA name and the Hellvape name and log etched on it. You can see the hex in the plated 510 pin which comes pre-installed in the base but can be easily switched out with the included 510 squonk pin.

The Mini has a two sets of round airflow holes that are adjusted by turning the outer chamber once installed on a mod. It can go from a tight MTL to a nice RDL type of airflow. I have been preferring it with the airflow fully open while using the included coil.

The build deck is postless and has four grub screws so the single coil can be installed using either set of holes. Each side of the deck has four holes to direct the airflow to the coil. The grub screws have slotted heads and are easily tightened with the included screwdriver. The base has two large o rings to hold the outer chamber securely in place and keep the rda leak free at the base.

FINAL THOUGHTS:

As usual it was a real pleasure testing another rda from Hellvape. The Dead Rabbit Mini RDA is a great little rda for those that want an easy to use single coil rda that runs great under 40 watts without getting overheated.

I used the included coil and screwdriver to set up the rda for testing. I used the included coil cutting guide to trim the coil legs to the recommended 5mm length. Once installed, I pulsed the coil until the coil heated evenly. The included cotton thread is plenty long and you could probably get three or more wicks out of it if used correctly. I trimmed the wick even with the edge of the deck.

I really liked the flavor and vapor production I got from the mini. I was able to run the included coil at 30 watts with the airflow fully open. It was nice to run an rda that I could run at lower watts and extend battery life of the mod. I did install the squonk pin from the beginning and ran it on my Centaurus squonk using the beauty ring. It looked good and performed well. I’m not used to using a 20mm rda so my first time squonking I pushed a little too hard and had some liquid come out of the airflow holes. After that I was gentler when pushing on the squonk bottle and had no further issues. I was kind of surprised that I didn’t see the Dead Rabbit icon anywhere on the rda.

I’d like to thank Hellvape for sending the two Hellvape Dead Rabbit Mini RDAs for my review. As always, a big thanks to the readers for taking the time to read my review. Below is a link to the website for your viewing pleasure.

Dead Rabbit Mini RDA-Hellvape - The DIY atomizer leading brand

Got it and it's great

For the past while, I've noticed I am not alerted when I'm mentioned in a thread with @smacuser.

I found out about winning a couple of giveaways only by revisiting those threads, and saw where I've been mentioned in other threads without being alerted. I checked my preferences and all my alerts are enabled.

---

---

• 1. Fit for iCita Pod Cartridge 0.3Ω/0.6Ω/0.8Ω
• 2. 3ml capacity, easy side filling system
• 3. Stylish and flat, zinc alloy with leather
• 4. Built-in 1600mAh battery with 40W max
• 5. Adopts touch-controlled power adjustment
• 6. Multifunctional and intuitive OLED screen
• 7. 5V/2A fast charging to get full power in just 1 hour
• 8. DTL vaping with adjustable airflow system
• 9. Multiple protections to ensure safe use

---

---

---

---

---

---

---

---

---

---

---

---

Thoth T Pro, the new Kumiho pod offered for free by HealthCabin without receiving any payment or having any work relationship with them. An alternative version of the already existing "T" model, which was designed for disposable users with its simplicity. This time, it targets vapers who are looking for something different from other Thoth models.



While the cartridge and coil series remains the same as all Thoth models, with relative backward compatibility, what sets the Thoth T Pro apart from other models (and the Thoth T "normal," which is similar in design but semi-mechanical) is the large color screen, vibration feature, and 3 different vaping modes. The battery's mAh and charging speed have also been increased to support these new features. Its dimensions are 48 x 23 x 78mm, with an aluminum body and PCTG.



Kumiho continues with its minimalist packaging, keeping costs low, always aiming to challenge disposable users and encourage them to switch to open systems. Inside, you'll find the Thoth T Pro, a 0.6 ohm Thoth Cartridge, and an instruction manual.



Once again, Kumiho chooses the smoky-colored PCTG cartridge, although clear and half-black, half-transparent pods (for coil installation) are also available. It has a 2 ml capacity, always in the 0.6 ohm version, with a "MIN" etched on the front to prevent the coil window from being too low and ensuring proper e-liquid flow.



Refill via a cap, with the bottom featuring a pair of magnets and contact points to allow cartridge reading. A pro of the cartridges is the presence of an internal membrane that eliminates leaks and condensation, though this means you have to dispose of the pod once the coil is used up.



The coils and cartridges available remain identical and compatible across the entire Kumiho family, with the advantage of not needing to buy separate ones.

- 1.2 Ohm (recommended 10-12 watts)
- 1.0 Ohm (recommended 12-15 watts)
- 0.8 Ohm (recommended 16-20 watts)
- 0.6 Ohm (recommended 20-25 watts) (included in the package)
- 0.4 Ohm (recommended 25-35 watts)

All with a mesh section. A new feature of the Thoth T Pro is the slightly better support for coils, like the 0.8 Ohm, thanks to the larger battery capacity, and the same goes for the 0.6 Ohm. Note that these cartridges work very well even with 2 or 3 watts less.



The pod housing leaves the PCTG section of the drip tip exposed, allowing you to see the remaining liquid without removing it. On the side, there is a knob that, when pressed, acts as the fire button with a textured grip. It's fairly large in size but undoubtedly comfortable, offering a new way to hold a pod.



The USB Type-C port is installed on the side of the Thoth T Pro body. This is an upgrade over previous models with 5V/1.5A charging, whereas the others should be 1.2A across the board. This means that fully charging the 1300 mAh battery takes about an hour. As per Kumiho tradition, a USB Type-C cable is not included in the package, but a Kumiho-branded 3A cable is available for purchase. However, it's not necessary, as long as a good quality one is used.



On the side, the slider, now a signature feature of Kumiho, with its three small holes – the first two smaller and the third large. Given the 1300 mAh battery, I would have preferred a fourth hole or making all three large to allow for more airflow when needed, and to better handle coils with lower amperage, making it Kumiho's first true RDL pod.



On the back, the fidget spinner from the S and T (normal) models makes a return, with the Kumiho logo engraved. In the center, there's a rubber insert that provides a firm grip since, on the opposite side, you'll find the screen. No matter how you hold the Thoth T Pro, your hands naturally end up resting there, so while it does break the aesthetic a bit, it can't be denied that it serves its purpose well.



Front side with the biggest innovation for Kumiho: the 1.44-inch OLED screen, while the average on other boxes is "only" 0.96 inches. There's no need to worry about power consumption, as OLED screens consume less than TFT and LCD displays. That texture on the screen is a thicker film than the usual ones found on vaping devices; it's impossible for it to come off on its own unless you remove it. It's therefore useful for avoiding scratches if you want to dedicate the Thoth T Pro to outdoor or work use.



Thoth T Pro controls:

- 2 clicks to change vaping modes
- 3 clicks to unlock and adjust wattage
- 5 clicks to access the menu and select from:
- Power off
- Reset puff counter
- Lock fire button (Lock)

The three vaping modes are a nice innovation. In the Thoth family, some were semi-mechanical, and others didn't go beyond variable wattage. Here, you can choose between Super, ECO, and Normal modes. It's easy to understand what they offer, and based on my experience, I can estimate that they provide around 20% more or less initial output depending on the selected setting. The tradition of automatic draw and always-active fire button continues, without the need to switch.

Protections:
- 8-second cutoff
- Overcharge protection during charging
- Short-circuit protection
- Low battery voltage protection



It's nice to see the progress of a brand like Kumiho, which seemed a bit stuck offering variations on the theme. The first release of such an advanced pod coincides with its appeal to a broader range of vapers. Beyond the aesthetics, which may not be important to everyone, it's undeniable that the faster charging times and larger battery capacity are convenient, along with the different vaping modes.

The Kumiho Thoth Pro is available on HealthCabin in 5 colors, along with all the various pods and cartridges: https://www.healthcabin.net/kumiho-thoth-t-pro-pod-system-kit-p/30087.html

Thanks to the Staff and community of the e-cigarette forum.

VOOPOO Argus G3 Mini Kit

VOOPOO Argus G3 Mini Kit combines lightweight portability with 1350mAh long-lasting battery life. It is equipped with Argus Top Fill Cartridge V2 that adopts iCOSM CODE 2.0 tech to ensure 30-day cleanness, 100 ml endurance, and steady smoothness. VOOPOO Argus G3 Mini features 3ml capacity, topside filling, and LED light indicator, and is compatible with Argus Top Fill Cartridges.

Details:
1. 1350mAh battery
2. iCOSM CODE 2.0 tech
3. Mini size yet mighty power
4. Aluminum alloy body
5. LED light indicator
6. Compatible with Argus Top Fill Cartridge
7. Safety protections: 5s Overtime/Short-Circuit/Low Battery/Overcharge/Over Temperature/Output Over-Current/Anti-Reverse Battery Protection




Joyetech Exceed PCC Easy Kit

Joyetech Exceed PCC Easy Kit is built with 600mAh battery. It supports USB-C charging and magnetic wireless charging with Exceed PCC Case(PCC, not included). Designed with 360° ring-shape indicator, it can show you battery status. It is compatible with Exceed PCC Pod Cartridge that has 2ml capacity and easy side filling system. With standard & narrow 510 mouthpieces included in the package, it can bring you distinct vaping experience.

Details:
1. Built-in 600mAh battery
2. 360° ring-shape indicator
3. Dual charging option
4. Able to work with Exceed PCC Case (not included)
5. Fit for Exceed PCC Pod Cartridge
6. 2ml capacity, side filling

Besides the obvious long term storage, I have recently cut my nic in half. Apparently compensating by taking longer draws and getting a slight burnt taste with a fully charged battery. Goes away quickly, and not present if I pull the battery early. Same device, coil, etc I have used for years. (1.5 ohm, no sweet juice, re-wick when needed but coils last for years!) Consistent behavior for several weeks now so not any of the other stupid things that cause this such as a bent coil blocking air or saw dust, pocket lint, etc.

Must be able to charge a 18350 as well as larger sizes. Perfect excuse for a new charger if such a beast exists

Hi does anyone experience extreme tiredness and can’t wake up due to vaping

Hello Guys!

Welcome to my site, today I would like to introduce you the Voopoo VMATE i2

I got the Space Grey colour from Voopoo’s webshop for a spot price with their 9.99$ Lucky Bag and a bonus 25% discount code. I bought 5 bags and received all sorts of devices and coils worth much more, much recommended! I will show you them if you don't mind

This is not the newest model anymore, however it is worth showcasing that there are some exceptional vapes out there - at affordable prices - that fall far outside of the currently trending disposable-like design range. The VMATE i2 is the follow-up model of the infamous Voopoo VMATE Infinite and is cross-compatible with all VMATE or V.THRU pods.



After some time of vaping now, I realised the mystery lays in the pod that sits on top of the device, the pod-head Since the batteries nowadays provide more or less the same performance - only their design varies throughout the different manufacturer lines. I would like to emphasize that so far, I got the best and most reliable vaping experience with Voopoo’s newest generation pods, that also comes with this device. I believe their secret is the bigger coil, bigger wicking holes and the bigger chamber that provides obviously much better and constant saturation compared to the tiny-mini, microscopical coils of other manufacturers. No matter how big, fancy or powerful the device appears to be. You will get here a 1500 mAh powerhouse, in a sleek elegant form with a perfect pod (cartridge as Voopoo calls it).

The kit contains the iconic VMATE 7.0-ohm 3 ml ‘top-fil’ cartridge, unfortunately only just one. However, it will give you much longer life (3x more according to Voopoo) to decide whether it is to your liking. In my experience, after two weeks of use I see this will easily meet the stated 1 month period. Taste, smell and vapor are still when new. It goes really a long way, like BMW’s long-life oils! I only had a little condensation at the bottom connector discovered now that I cleaned the device for shooting.



The pod sits very firmly in its place as it not only connects with magnets but you also have to push it gently in until it clicks. Detaching the pod needs some force similarly. You can even hold the device by the pod (or in your mouth, however it is a bit heavy for that purpose) and it won’t disconnect from the battery. Big like! Since the pod sits on top of the device, you can see the e-liquid level clearly. It is not really a ‘top-fil’ pod, rather a side fil, but to me it is the most practical and least messy filling method.

I paired it with 15 mg nic salt Spearmint Gum flavour as I find the device’s design and discrete appearance goes well in an office environment or a business meeting, with discrete vapor and smell.

The built quality and design are professional, it is sleek and lightweight, made of aluminium alloy and all edges are nicely rounded. The precisely engraved V patterns and branding give a very elegant appearance to the device, it is shiny, without catching your fingerprints. At the side there is a fancy RGB light that flows in various colours while vaping and the length of this line indicates the charge of the battery, like a thermometer. How shorter the line, how lower the battery – smart and simple indicator to my liking. Same goes for charging, the RGB line turns then green and flows upwards. I had to charge it only twice in two weeks of use, however I use 3-4 devices in rotation.



At the front you find a firm airflow regulator that won’t slide while carrying the device in your pocket. With the airflow 2/3 closed it gives me a perfect MTL draw with a decent throat hit. It is definitely an MTL device.



At the bottom you find the USB-C connector surrounded with a rubber band that is aimed to prevent it from wear and tear when standing, unfortunately it is not in balance and falls easily when placed upright. This is a con to me as I like to store my vapes in standing position.



For the magical pod, the quality and elegant appearance with a stunning 1500 mAh battery - this kit is a no brainer at this price.

Hope you liked my review; would you have any advices or questions don’t hesitate to connect with me.

Happy vaping folks!

Re:BlueSky

As of May 2025 BlueSky has 26.6M users & growing daily w/....ter exodus.

Isnt it time your platform offered a #shareTo link? @bsky.app
EShare ur.e-cig is archived.
As world exodus from ....ter continues, BlueSky.app has 26.6M users

TYVM

Hello, today we are going to take a look at the Pixo Neo Pod sent to me by Aspire. I will examine in this Test each of the features that distinguish this item. I hope that at the end of this reading you will have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.

► Aspire Pixo Neo; Before starting, let's see together some special features indicated by the manufacturer:
• Customizable power up to 30W
• 0.85-inch TFT color screen offers a clear view of the key vaping parameters
• 3 adjustable activation modes
• Continuous airflow adjustment for precise control over MTL, RDTL and DTL vaping styles.
• Energy saving configuration by setting the RGB indicator to "LIGHT ON/OFF"
• 3 distinct themes and 3 vaping animations to customize your experience, improving both the appearance and usability of the device.
• Smart and Watt modes for a personalized vaping experience.
• 1300 mAh battery with 2A fast charging lasts up to 4 days on a single charge, ensuring continuous vaping pleasure.
• Four different coil resistances for versatile vaping preferences.
• Side filling system with anti-leakage design
• Top filling system with anti-leakage design (CRC POD)



► Aspire Pixo Neo; Packaging:
The Pixo Neo packaging on the front shows the device inside thanks to a transparent window, on the front of the box there are; the name and brand of Aspire, the advertising motto "Smart Smooth Superior" and a vertical writing "PIXO NEO" in large letters in reflective silver, note that this writing is also detectable with the fingers. On the back of the package there are; the contents, general warnings, manufacturer addresses, logos and legal trademarks. On the remaining sides you can see; the main features in the form of icons, the scratch & check, the barcode with color indication of this sample (Light-Brown).





► Aspire Pixo Neo; Packing List:
• 1 x Aspire Pixo Neo Device
• 1 x Pixo Pod 0.4Ω Range 23-30W (3ml)
• 1 x Pixo Pod 0.6Ω Range 14-19W (3ml Pre-installed)
• 1 x Type-C Charging Cable
• 1 x User Manual



► Aspire Pixo Neo; Specifications:
• Aerospace-grade aluminum alloy construction
• Size: 110*30.4*16.2mm
• Weight: 60 grams
• 0.85 inch TFT color screen
• Voltage range: 3.2V-4.2V
• Wattage range: 5W-30W
• Top filling e-juice pod design
• Built-in 1300mAh battery
• Resistance range: 0.5Ω-3.0Ω
• Output mode: Smart / Watt
• 3 Firing modes A (Autodraw) B (Button Activation) AB (Auto Draw + Button Activation)
• Adjustable airflow control
• Pucker counter and vaping time monitor
• Compatible with all Pixo series pods
• Safety: Overcharge, Short Circuit, Overheating and Over Vaping (Cut Off)



► Aspire Pixo Neo; Available Colors:
• Black
• Anthracite Blue
• Green
• Light Brown
• Purple
• Red
• Silver Gray



► Aspire Pixo Neo; Introduction:
The original Pixo device has been on the market for a few months now, Aspire given the success of Pixo has decided to propose a new version "Pixo Neo"! In general, the new arrival does not differ much from the original project in fact we find few differences regarding the form factor, weight and dimensions, the construction materials are the same, the appearance is similar, the animated interactivity of the color display remains, but the touch function is lost, the sharing of the excellent Pixo cartridges remains. It is worth noting the increase in battery capacity that on Pixo Neo goes to 1,300mAh, a figure that will certainly please those who vape outdoors.



► Aspire Pixo Neo; 1,300mAh Battery:
On the bottom of the Aspire Pixo Neo there is a USB Type-C 5V-2A charging port to connect to the internal 1300mAh battery that allows you to deliver a maximum power of 30W, according to Aspire this battery is designed to offer up to 4 days of use on a single charge, this is certainly an interesting fact, but as we all know, the duration of the charge depends on the frequency of use and the power set. The full battery charge is quite fast, and is about 50 minutes. During charging you can view the progression of the charge.

Ends time: May 12th

$0.01 Get 1 Wenax M2 Gift Box:
Order with any product, get two Wenax M2 Kits at only $0.01!
Limited Quantity, First come, first served!
Details: https://www.sourcemore.com/geekvape-wenax-m2-kit-gift-box.html

10% OFF SITEWIDE Coupon: MM10
Bronze Level Exclusive 5% OFF Coupon: MM5 (Must log in)

Enter here<<< https://www.sourcemore.com/

Hey Vapers,

Spring is in the air, and so is the fresh new flavor from RAZ RYL—introducing the RAZ RYL Spring Edition 35K Disposable! If you're a fan of smooth clouds, vibrant taste, and seasonal vibes, this limited-edition release is exactly what your vape collection needs.


What Makes It Special?
Up to 35,000 puffs: Long-lasting performance for those who don’t want to constantly replace their vape.
Signature RAZ vape RYL flavors: Light, refreshing, and perfect for the warmer months.
Stylish and portable: Sleek design that’s as eye-catching as it is convenient.
Consistent quality: Expect smooth hits, dense vapor, and flavor that lasts to the very last puff.

Looking to pick one up? You can find the RAZ RYL Spring Edition 35K Disposable at your favorite online vape store, where stock is moving fast—don’t miss out on this seasonal sensation! Happy vaping and happy spring!

Other kits you may prefer:
vaporesso luxe xr max 2 sale
buy pyne pod click 66k

Hello Vaping Enthusiasts,


As you might have heard, the final vape tariff has been set at a staggering 170%. This raises the question: how will it affect the prices of vape products moving forward?


Some argue that we’ll likely see a price increase as companies pass the costs on to consumers. However, others believe that the industry may adapt by reducing margins or looking for alternatives to keep prices stable.


What do you think? Will we be paying more for our favorite vape devices and e-liquids soon, or is the impact going to be minimal? Let’s discuss in the comments below!

Hellvape Dead Rabbit Mini RDA

Hellvape Dead Rabbit Mini RDA is designed with a compact chamber to bring you dense cloud and rich taste. The Dead Rabbit Mini RDA has a 20mm diameter, which can be expanded to 22mm with the included detachable beauty ring for a better look and a perfect fit with most powerful AIO kits. It is equipped with a postless building deck for easy single-coil builds. It supports precise airflow control to customize your vaping and includes an extra 510 resin drip tip to bring you a better experience. Get it.

Details:
1. 20mm diameter RDA to match most AIO devices
2. Packed with a 22mm beauty ring to match more mods
3. Compact chamber for denser cloud and taste
4. Postless building deck design
5. Able to provide smooth RDL vaping
6. Designed with airflow adjustment system
7. Includes an extra 510 resin drip tip




Vaporesso Luxe XR Max 2 Kit

Vaporesso Luxe XR Max 2 Kit features a 3200mAh ultra-high-density battery for long-lasting vaping. It adopts AXON Chip and supports Pulse/ECO/Smart mode to customize your vaping. With 0.96'' TFT screen and RGB light, it can show you all the necessary vaping info. Paired with interactive and dynamic lights, it will provide you with better visual experience. Luxe XR Max 2 is designed with precise airflow to bring you MTL & DTL vaping. Working with GTX Dual Mesh, it can deliver enhanced taste and extend lifespan. It is compatible with Luxe X Pod and Luxe XR Empty Pod with GTX Coil. Get it.

Details:
1. Dual mesh coils for richer taste and longer lifespan
2. Fit for all Luxe X Pods and Luxe XR Empty Pod & GTX Coil
3. Precise airflow adjustment for MTL & DTL vaping
4. 3200mAh MEGA BATT & adopts AXON CHIP
5. Pulse/ECO/Smart mode for your option
6. 0.96'' TFT display screen + RGB Light
7. Interactive and dynamic lights for better visual experience
8. Lock button & optimized mouthpiece & silicone base

The OXBAR Ice Nic Control 35K isn’t just another disposable vape—it’s the world’s first device to offer fully adjustable ICE and NIC settings, unlocking 12 unique vaping experiences in one sleek, colorful device. Whether you're craving a cool, icy blast or a stronger nicotine hit, the OXBAR lets you tailor your session with 4 ICE levels and 3 nicotine strengths, all with the simple tap of a button.

Equipped with a massive 900mAh battery, this powerhouse delivers up to 35,000 puffs, keeping you satisfied day after day without constant recharging. The large, intuitive front screen display keeps you fully in control, clearly showing your battery life, nicotine level, and ice level at a glance.

Comfort is king with the upgraded soft mouthpiece, designed to feel gentle and natural, while the airflow control ensures a consistently smooth draw. Whether you're new to vaping or a seasoned pro, the OXBAR Ice-nic offers a personalized, premium experience.

Stylish, smart, and incredibly fun to use, this is more than a vape—it’s your all-in-one flavor adventure. Take control. Take a puff. Welcome to Ice-nic freedom. Get your favourite flavour at the best online vape store.

I'd like to suggest:
https://vapesourcing.uk/vaporesso-luxe-xr-max-2-kit.html

Spring cleaning your vape game? Start fresh with the RAZ RYL 35K Spring Edition, a device that doesn't just puff — it performs. This isn’t one of those “nice to look at, meh to use” disposables. This is leather-wrapped elegance wrapped around beast-level functionality, all dangling from a classic chain lanyard like the designer accessory it was born to be.



820mAh Rechargeable Battery — locked and loaded. The RAZ doesn’t ask for permission; it just keeps going. Pair that with USB Type-C charging (cable not included, but come on — you probably have five already), and you’re back in action before your playlist hits track three.

With up to 35,000 puffs, this device is not here for a good time or a long time. It’s here for both. Powered by 16.5mL of e-liquid and a bold 5% nicotine strength, this one’s made for sessions that last and flavors that don’t fade.

Feeling picky? Good. The airflow control lets you dial it in just right — tight and rich or airy and light. Top it off with a 0.96-inch HD screen that keeps your info front and center, and you've got a vape that’s equal parts smart and stylish.

Quick Specs Recap of These Cheap Vapes Disposable:

• 820mAh rechargeable battery
• 16.5mL e-liquid capacity
• Up to 35,000 puffs
• 5% nicotine
• Airflow control
• HD screen
• Leather grip
• Chain lanyard
• USB-C charging

Ready to snag yours? Head over for some of the best vape promotions on the internet. No fluff, no fuss — just prices that make sense and deals that deliver.

Quick view:
mother's day sale vape
bounce vape 50000

If vapes had a superhero league, the Lost Mary MT35000 Turbo would be the one with a cape, a jet engine, and a personal assistant. This isn't your average puff-and-done device. This is 35,000 puffs of “Where-have-you-been-all-my-life” — packed into a compact, palm-hugging grip that makes every draw feel like a VIP lounge experience.



Let’s talk tech. The MT35K isn’t just smart — it’s cunning. The Blend-in Display? Only shows up when you actually puff. No lights, no blinking distractions, just you and a discreet readout of your battery, juice, and boost levels. It’s like your vape is saying, “I’ve got this. Focus on the flavor.”

And speaking of flavor — welcome to Super Smooth Taste. This thing hits like velvet. Over 90% flavor consistency, which means you’re not getting a “watered-down mango” halfway through the week. It’s 18mL of top-shelf e-liquid, 5% nicotine, and a draw that says, “Yes, this is the good stuff.”

Need control? You’ve got Dual Modes:

• Smooth Mode: Up to 35,000 puffs — marathon vaping, no training required.
• Turbo Mode: 20,000 puffs with a boost that’ll make your taste buds stand up and cheer.

The 1000mAh battery with USB-C fast charging gives you all-day juice after just 10 minutes of charging. That’s less time than it takes to find your missing lighter (again).

Specs You’ll Actually Care About This Cheap Disposable Vape:

• 18ML e-liquid
• 5% nicotine (50mg/mL)
• 1000mAh battery
• 106 x 43 x 23mm — a compact king
• USB-C quick charge
• Blend-in Display with battery, e-liquid, and boost level monitoring
• Smooth + Turbo Modes for puff count flexibility

Here’s the clincher: if you’re looking for the cheapest online vape store, we’ve got you covered. Skip the markups and mystery sites. Click through to Morevaping and grab your Lost Mary MT35000 Turbo Disposable Vape at the best price around — your wallet and your taste buds will both thank you.

You might also like:
ploox x party shisha cup
olit hookalit s 35000

If you’ve been around the vaping scene for a while, you may have already come across the Eleaf iVeni. While it's not a brand-new release, this sleek pod system continues to stand out as a solid, user-friendly option for those who value portability, control, and flavor.

A Balanced Design That Just Works​

The iVeni doesn’t try to overcomplicate things. Its minimalist design, clean lines, and pocket-sized frame make it ideal for vapers who want an everyday device that’s both subtle and stylish. Available in a range of modern colors, it’s built with quality materials that feel comfortable and durable in the hand.

Adjustable Power, Adjustable Airflow​

Unlike many pod vapes in its size range, the iVeni gives you a bit more control. You can adjust the wattage from 6W to 35W using a simple button interface — great if you want to fine-tune your vape to match your coil or e-liquid. The airflow is also adjustable, so whether you’re into tight MTL draws or looser RDL hits, the iVeni can adapt.

Performance That Holds Up​

Powered by an internal 1100mAh battery, the iVeni delivers a full day of moderate vaping on a single charge. The 2ml refillable pod paired with mesh coils produces clean, consistent flavor, especially when using nicotine salts. And thanks to the USB-C port, recharging is quick and hassle-free.

Who’s It For?​

The iVeni is ideal for:

• Vapers who want more control than a typical disposable or basic pod
• Beginners who appreciate simplicity but don’t want to sacrifice quality
• People looking for a compact yet customizable backup device
• Fans of Eleaf who want a dependable, travel-friendly option

Final Thoughts​

Even months after release, the Eleaf iVeni still earns a spot in daily rotation for many vapers. It’s reliable, easy to use, and versatile enough to suit different styles. If you haven’t tried it yet, it’s worth a second look — especially if you want something sleek that doesn’t compromise on performance.

After its older sibling, the Slim, it's the turn of the newborn eRoll Nano (Kit) sent free of charge by Joyetech. I have no work-related relationships with them, nor do I receive any financial compensation. As the name suggests, as a product it aims for portability with further reduced dimensions. It remains a kit with paired pods and power bank, or as Joyetech has baptized them, Pen and PCC (Portable Charging Case).



Therefore, there's a slight loss of battery life; the Pen loses the USB Type-C, depending entirely on the PCC. However, in return, you get a kit that takes the bulkiness issue of most pod and power bank pairings and turns it into a strength, given that the total dimensions are close to those of some RDL pods, and the weight together does not exceed 60 grams.



The packaging and contents are partly inspired by the disposable world. The eRoll Nano Pen and PCC, just taken out of the cardboard box, are in an opaque plastic bag along with the instruction manual and the warranty. To limit costs and bring the eRoll Kit as close as possible to that of a single disposable, there is no USB Type-C cable. A scratch and check is also present on one side of the box.



The eRoll Nano Kit is made of aluminum and consists of its Vape Pen, 17.5 mm in diameter by 96.1 mm in height, and weighs 24 grams. Given the size, the battery is 310 mAh. The PCC measures 83.6 x 27.2 x 19.5mm and weighs 33 grams. Here too, the dimensions necessitate an 800 mAh battery. In less than 60 grams of total weight, liquid included, you have about 1100 mAh of battery and a maximum output of 14.5 watts.



The eRoll Nano Pods available for the kit are cartridge type, with the coil integrated into the slightly dark glossy PCTG structure, which is entirely discarded once the cotton is exhausted. Despite the expense, the pro of cartridges is eliminating leaks and condensation. The capacity is only 2 ml, even for non-TPD editions. This time, to maintain the compact dimensions, the drip tip is a single body with the rest of the pod, which also provides a nice MTL draw. Refilling the 2 ml is done via the plug located on one side of the pod.



eRoll Nano Pods are available in 1 and 0.8 ohm (the latter included in the package); since the eRoll is a "semi-mechanical" device, the maximum wattage it delivers is 14.5 watts.Here too, the connection of the eRoll Nano Pods to the battery body, in addition to the two classic magnets, also features two centering pins to prevent the Pod from moving and losing contact during vaping.



The Pen's dimensions allow it to be slipped, on its own, into any small pocket. The design, as Joyetech has accustomed us to, is clean and minimal, with fixed, non-adjustable airflow and the rest made of aluminum. The only variation is the LED (or perhaps LEDs, plural) that indicates when the eRoll Pen is charging, and in case of a low battery, as we'll see later, it turns red.



The contact between the Pen and PCC relies on the usual gold-plated pins, this time two, and two magnets. This time they are visible and also slightly stronger than those on the larger siblings produced by Joyetech, to compensate for the absence of a lanyard. The housing for the pen also has a shape to prevent the Pen from sliding downwards.



On the upper side of the PCC, there is an LED indicator that changes color depending on the remaining charge. When the Pen is attached to the PCC, in most cases, given the small size, I also found myself resting my thumb right on the LED for a more comfortable grip. It is therefore possible to vape with the Pen charging, thanks to the drip tip.



Also on the Nano version of the eRoll, there is a button/sensor that allows, when pressed, to check the charge status thanks to the LEDs, and specifically here too, it does not act as a fire button when the Pen is attached. The only way to charge the Pen is via the PCC. Charging for the 800 mAh battery of the PCC is via the 1A USB Type-C port, while for the 310 mAh of the Pen it is 0.7A.



The bottom features the usual CE marking and disposal symbol. The eRoll must always be placed on its side due to the small surface area. Given the weight of the Pen alone, but also Pen + PCC, a notch for a keychain lanyard would have made sense to always have it with you and avoid having to set it down.



Brief introduction to the circuit that allows you to understand, even with the Pen removed from the PCC, how things are progressing. The PCC indicator is slightly more precise than the pen's, where you have to estimate how much battery is actually left before it runs out. But as I said, compared to the other two Joyetech entries in the pen + power bank world, this eRoll Nano is not designed with the Pen independent of the PCC. Given its size, it's more likely that you'll always carry the combo with you, also due to the inability to charge the Pen separately.



In addition to the normal eRoll Kit, I also saw that only the Pen body and the PCC are available for separate purchase, to supplement your equipment or battery life, or even if one of the two elements is lost, you don't have to buy the whole kit again. This is an important feature in a product that I imagine is targeted at those who need to cover one or two hours of vaping, from a backup device to keeping it in another room of the house so you don't always have to carry your main device with you. There's also always an eye on the new generation of vapers who need to detach themselves not from cigarettes anymore but from disposables, given the costs and restrictions. In terms of kit bulk, PCC/power bank included, we're there.

For more info, you can check out the dedicated eRoll Nano page on the Joyetech website: eRoll Nano | Palm-sized Vaping Solution | Vape Pen - JOYETECH

Thank you to the staff and community of e-cigarette forum and Joyetech for giving me the opportunity to try the eRoll Nano.