These tests below only note my personal opinion for the ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This can be one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. Never use them outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous discharge rating (CDR), never let it get colder than 0°C or hotter than 60°C, and keep the plastic wrap and top insulating ring in perfect condition. Never use a battery that is physically damaged in any way.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
The Molicel P28B is the best performing high power 18650 we can buy now. It performs essentially the same as the P28A at up to about 15A-20A but above that the P28B performs a little better. The P28B performs better than the P26A at all power levels, especially when above 20A. Not a huge difference but it will be noticeable in my opinion.

The P28B also runs up to several degrees cooler than the P26A at higher power levels.

The datasheet only lists a temperature-limited discharge current rating of 40A. According to the datasheet you can run the P28B at 40A but you must keep the cell temperature below 80°C. Since this cell reaches over 110°C when discharged continuously at 40A we cannot use that as a true continuous current rating.

For direct comparisons between cells I rate the P28B at 25A continuous/40A non-continuous (as long as you keep the cell below 80°C).

Molicel is not trying to fool us with their ratings. Their cells are rated for the applications they’re typically used for; electric vacuum cleaners, power tools, and other products that draw lots of power for short periods of time. Molicel’s datasheets are written for the engineers from their large commercial customers who know how these cells are rated.

The two cells I tested delivered 2746mAh and 2760mAh which is fantastic consistency. They easily met their 2650mAh minimum capacity rating but not their 2800mAh “typical” rating. I am rating them at 2700mAh since I cannot have the lowest capacity cells in the batch.

Bottom line…these are fantastic cells and I’m not at all worried about them being a little below the typical capacity rating.


18650 Ratings and E-Scores Table:


20700/21700 Ratings and E-Scores Table:


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic


I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Patreon.

To see how other cells have tested check out this link: Links To All 21700, 26650, 18350, 18500 Battery Tests

does anyone know what micro usb 5 pin port is in drag 2? which type because I want to replace because mine does not work

Hey everyone, thanks for joining the post to win contest! The winner is… @AngeNZ ! Congrats and I’ll be sending over your prizes soon!

• 3 month subscription for you and a friend
• Contest winner banner on your account
• Unique emoji that you and a friend can use
• Unique achievement

Aspire Veynom EX 100W Pod Mod Kit will surprise big cloud enthusiasts, designed specifically for a quality direct vape experience (DTL). The Veynom EX runs on a single 18650, 20700 or 21700 battery (sold separately), guaranteeing long autonomy even in the face of the 100W maximum power.Veynom cartridge that can hold up to 5 ml of e-liquid, using the remarkable BP resistors that will offer you incomparable flavors.

Kit Dimensions: 138.5* 35.5*29 mm
Pod Capacity: 5.0 ml / 2.0 ml (TPD)
E-liquid Filling: Screw-to-open top fill
Airflow: Rotate to adjust airflow
Coil Compatibility: Compatible with BP series coils
Dimensions (Including drip tip): 26.5*43.5 mm

Device Specifications
Battery: External 18650 / 20700 / 21700 battery
Output Modes: AUTO / WATT / VOLTAGE / BYPASS / TC / CPS
Output Wattage Range: 1-100W
Output Voltage Range: 0.5-9.0V
Activation Mode:Auto-draw & button activated
Adjustable Temperature Range: 200-600F / 100-315C
Recommended Resistance: 0.08-3.5Oohm
Continuous Fire Time: 10s
Screen: 0.96inch TFT color screen
Charging Port: Type-C
Max Charge Current: 2A
Dimensions: 104.8* 35.5*29 mm

Click here for more:
Aspire Veynom EX 100W Pod Mod Kit : Aspire Veynom EX 100W Pod Kit

Dive into the world of exquisite vaping with the Hyde Edge Rave Refill. Its ability to recharge ensures a long-lasting, satisfying vape experience.

If you're in search of the next big thing in vaping, you've found it with the Elf X. Compact, high-performing, and packed with incredible flavor profiles, the Elf X elevates your vaping experience.

Make your vape experience unforgettable with Hyde Rebel Recharge 4500 Puffs Flavors. Dive in to discover a range of flavors that defy the ordinary.

Discover the magic of GS Ego, a masterpiece in vaping technology, delivering remarkable power in a compact size.

Dive into the pool of incredible flavor with the Esco H20 bar. Discover the vast collection at Escobar Flavors.

Start your vaping journey and clarify your doubts like "do esco bars have diacetyl?" on our comprehensive beginners' guide.

VOOPOO Drag H80S Pod Mod Kit Forest Era Edition, a stunning blend of style and performance!

Crafted with a blend of Zinc Alloy and Leather, the Drag H80S exudes elegance and durability. Its 5ml E-liquid capacity and side-filling design make refilling a breeze, ensuring uninterrupted vaping pleasure. The kit is compatible with PnP Pod II, providing versatility in coil options.

Powered by a single external 18650 battery (not included), this device delivers a maximum output of 80W, delivering intense vapour and flavour. The adjustable airflow design allows you to customize your vaping experience according to your preferences.

Featuring PNP Coils VM5 0.2Ω and PNP VM4 0.6Ω, the Drag H80S promises rich clouds and excellent flavour production. Embrace the Long-lasting ECO Mode for extended battery life, ensuring prolonged vaping sessions.

The magnetic battery cover and new CMF Device add convenience and sophistication to the overall design. If you want to learn more about vapes online, please visit our cheap online vape shop.

Guess You May Also Like:
eco nano vape kit
drag h40 voopoo

If you want to try an advanced version of e-cigarettes, then a high-power cigarette set is a good choice. The newly released VOOPOO Drag H80S Forest Era Edition is very popular with the market due to its excellent performance. I believe that after reading this article, you will also be moved by it.

Features：

• Battery: Single external 18650 battery(not included)
• Power Range: 5-80W
• Output Voltage: 3.2-4.2V
• Capacity: 5ml
• Filling: Top filling
• Resistance Range: 0.1-3.0Ω
• Standard Coil: PNP VM5 0.2Ω, PNP VM4 0.6Ω
• Compatible with PnP Pod II
• Adopt a long-lasting ECO mode
• Magnetic battery cover, new CMF device

Fashion Design:

Overall smooth and compact, easy to carry. The zinc alloy + leather combination is elegant while effectively reducing the damage to the product drop. The Forest Era Edition has a bolder color palette than the regular model.

Versatile Pod System:

Contains a 5ml pod that can be filled and replaced, compatible with PnP Pod II. top filling is convenient and reduces the possibility of leakage. You can rotate the pod to adjust the airflow at the inlet, or you can replace the VOOPOO PnP series coil with different parameters to create your own device.

The unique basin airway structure makes it easier to collect smooth and gentle airflow, and the basin can contain condensed water and is easier to clean. Combined with the advanced 2-in-1 technology, this not only improves the atomization efficiency but also greatly reduces the consumption of e-liquids. These techniques allow it to capture the original aroma of e-liquids, yielding finer clouds and a sweeter texture. Makes an excellent partner for evaporating e-liquids.

More advanced technology:

Created the ECO mode, that is, the power saving mode. When the battery is only 40% charged, you can choose to start ECO mode, and increase the amount of smoking by 10%, even if the battery capacity is insufficient, it can meet your needs. Of course, you can always choose to enter ECO mode, not just when the battery is low.

Equipped with GENE TT 2.0 Chipset, it not only provides a variety of e-cigarette modes, such as the ECO mentioned above, as well as SMART, and RBA modes but also enables the device to fire quickly and increase high, which is quite a technical innovation.

All in all, Drag H80S Forest Era Edition is a very powerful and advanced mod that is more versatile than disposable vapes and is definitely a good choice if you want to fully customize your own e-cigarette experience.

Related content recommendation：
best tobacco flavor disposable vape
best vape starter kit 2023

Calling all vape enthusiasts! If you're on the hunt for the best vape of 2023, your search ends right here. Say hello to the revolutionary SFOG Soul Bar Nicotine Free Disposable Vape Kit, a game-changer in the world of disposable vapes.

Are you tired of the limitations that come with traditional vapes? Do you crave a hassle-free, yet long-lasting vaping experience? Look no further, as the SFOG Soul Bar is about to take you on an unforgettable journey with an impressive 15000 puffs!

Designed to cater to your every vaping need, the SFOG Soul Bar stands out among its competitors with its unrivaled 20ml e-juice capacity. Gone are the days of constant refilling, as this disposable vape kit offers an abundance of flavorful puffs to keep you going for an extended period.

Worried about nicotine content? Fear not! The SFOG Soul Bar is 100% nicotine-free, making it an ideal choice for those seeking a cleaner vaping option. Now you can indulge in your favorite pastime without any nicotine-related concerns.

With its sleek and compact design, the SFOG Soul Bar is perfect for on-the-go vapers. Whether you're commuting, traveling, or just chilling with friends, this disposable vape kit is a convenient companion, ready to deliver an intense and satisfying vape session whenever and wherever you desire.

The SFOG Soul Bar has already garnered immense praise among vape enthusiasts for its impeccable performance and impressive longevity. This vape kit is set to redefine the disposable vapes market and raise the bar for excellence.

Don't miss out on the opportunity to elevate your vaping experience in 2023. Embrace the future of vaping with the SFOG Soul Bar Nicotine Free disposable vape - your gateway to unrivaled flavor, impressive puffs, and unmatched convenience. So why wait? Take the plunge and immerse yourself in a world of limitless vaping pleasure with the SFOG Soul Bar Nicotine Free Disposable Vape Kit - the best vape of 2023!

Related kits we recommend:
smok novo x Florida
luxe xr pod Texas

Hello and welcome back for another review by yours truly. This time I will be taking a look at the new Voopoo H40 Pod Mod kit that was sent to me by Voopoo in order to provide you with a fair and honest review. The H40 has an internal batter rated at 1500mah with a maximum output of 40 watts. It offers adjustable airflow for a DTL vaping experience. Included in the kit is the new PNP II pod tank with a liquid capacity of 5ml for longer vaping time between refilling. The airflow is 360 degree stepless while rotating the pod. The H40 has a .56” OLED display screen and offers two output modes which are Smart and RBA. The mod is made of zinc alloy and has a leather facing while the pod is made of PCTG. Sounds pretty good on paper but let’s see how it performs.





WHAT’S IN THE BOX?

1* Drag H40 Device
1* PnP Pod II 5ml
1* PnP-VM3 0.45Ω
1* PnP-TW30 0.3Ω
1* PnP Platform
1* User Manual
1* Type-C Charging Cable

SPECIFICATIONS:

FEATURES:

1. Small and portable, compact and powerful

2. Built-in 1500mAh battery with 40W max

3. Adopts upgraded PnP POD II of 5ml

4. Dual-in-one tech, PnP atomization platform

5. Compatible with all PnP Coils

6. 360° stepless rotational airflow adjustment

7. Able to bring you great DTL vaping

8. 0.54-inch OLED display screen

9. 360° exquisite leather facing & comfortable hold

INITIAL THOUGHTS:

The packaging for the H40 is pretty basic with the Voopoo and Drag H40 names on the two tone box face. It’s a little hard to see but there are three features listed under the Drag H40 name. The color version name is in smaller font near the lower left corner. The back of the box has the same two tone coloring with a list of the contents of the package and company information for Voopoo.

One side of the box has a nice color picture of the device inside the box along with an authenticity code, serial number, and a bar code with the color version name. The opposite side has a few icons with features listed below them. There is also a QR code you can scan with your phone to go to the Voopoo site. Mine has a sample sticker but yours won’t.

Once the outer shell is slid off then there is a black box sitting on top with the Voopoo and Drag names embossed on it. This box contains the user manual, charging cable, spare PNP coil, and a PNP Platform card. The H40 is compatible with PNP coils that operate within its 40 watt maximum output.

Once the black box is removed then you can see the Drag H40 with the PNP II pod already installed. Also the .45 ohm coil is pre-installed with a sticker covering the bottom as to prevent accidental firing prior to filling the PNP II pod tank. You can see in the third picture that there is a yellow tab on each end of the sticker covering the coil to make it easier to locate where to pull to remove the sticker.

The Drag H40 has a 1500mah battery capacity and has a stated charging rate of 1.5A/5V. I found this to be fairly accurate. I used my Klein USB tester and initially it was showing a rate of 1.12A/5.27V. I checked it intermittently while charging the H40 starting from a depleted battery and at some points it actually reached higher than the rated 1.5A. I was able to get well over 450 puffs on the counter before the battery was depleted. I was running the VM3 .45ohm coil at 28 watts which is well within the operating range of 25-35 watts. Much higher than that and the vapor was a little too warm for my tastes.

The Drag H40 is the newest member of the Drag Pod Mod family which includes 9 products including the H40 which are the Drag E60, Drag H80S, Drag S, Drag S PNP-X, Drag S Pro, Drag X, Drag X PNP-X, and Drag X Pro. The Drag H40 comes with the new upgraded PNP II Pod Tank and this tank will be adopted by the Drag E60 and the Drag H80S. I was told that the new CMF’s for the Drag E60 and Drag H80S were released on July 3 but as of right now I have personally not seen them yet. Like the H40, the new versions of the E60 and H80S will include the new upgraded PNP Pod II pod tank.

The Drag H40 has a body made of zinc alloy and is wrapped around most of the body with leather. It claims to be the smallest entry level pod mod. I honestly don’t know if that is the case or not. There are a lot of pod mods on the market. The Drag H40 has quite a bit of branding going on. There are the Voopoo and Gene AI names stamped on one side. The opposite side has the Drag H40 stamped into the leather in very large font. Honestly to me it really doesn’t matter as I don’t see it when it’s in my hand but some others might be a little more sensitive to the amount of branding on it.

The USB charging port for the H40 is located on the bottom of the mod so it will have to be laid down on its side while charging. This really makes no difference to me personally since tube mods are hard to keep standing up anyway while charging. As I had mentioned earlier, the charging rate is stated at 5V/1.5A which I found to be close to the actual rate so the mod should charge in about an hour maybe a little longer. Once again, mine was marked as a sample as you can see below.

The pod opening for the H40 is what I would describe as a cage system with a metal ring inside to give the three strong magnets something to attach to. It’s a little hard to see but there are three tabs protruding around the interior wall of the opening that lock into the notches in the base of the pod to allow the user to turn the pod while simultaneously adjusting the airflow. This system seems vaguely familiar and I’m almost sure I’ve seen it on another one of Voopoo’s pod mods but just can’t recall which one it was. The PNP coils are simply pushed in to seat. You can see in the third picture that there is a coil protruding and also can see the notches in the pod that I just mentioned that lock into the raised tabs to adjust the airflow. There is also of course the two spring loaded plated contacts that make connection with the bottom of the coils to apply power. This one does not have an airflow sensor in the opening as it is not an auto draw device.

The PNP II pod tank has a liquid capacity of 5ml. The opening for filling has one of the best rubber plugs that I’ve used. I like how it has a tab coming down to make it much easier to lift the plug for filling. Also the plug can easily be rotated out of the way for filling. This was well done in my opinion. The only thing that I didn’t like about filling was that the tip of my bottle hit the side of the coil when filling so I had to be careful to not fill it too quickly. Depending on the type of bottle used it might not be an issue. In the second picture below you can see that the drip tip for the pod tank is replaceable. It is a little different from your standard 510 tip as it has a lip around the base with writing on it that says PNP Pod II and Compatible with PNP coils. Kind of unnecessary branding in my opinion but I did find the drip tip quite comfortable to use.

The front of the H40 has a nice sized round fire button that works flawlessly followed by the .56” OLED display which comes with a clear sticker covering the display. I like to keep those on as long as possible to prevent scratching of the screen. Below the screen are the two adjustment buttons. The display shows a standard battery indicator on top. Going down, there is the Set Wattage, Mode of operation, Coil resistance, and Puff counter. The menu operation is as follows.

• Press the fire button 5X to turn the device on/off
• Press the fire button and the + button to lock/unlock
• Press the fire button 3X to switch the mode(Smart/RBA)
• Press the fire button and the – button to clear the puff counter

The H40 has several status notifications built in which one might expect on a device like this coming from Voopoo. They are as follows.

• Atomizer short
• Check atomizer
• Check battery
• Low power
• Low resistance
• Max Power
• Temp high
• Time out

FINAL THOUGHTS:

I feel like the Drag H40 is a welcome addition to the Drag series. It is a very small pod mod for a device with a 1500mah battery. It is small enough in size to be easily carried in a pocket. Of course it would be a good idea to lock the device before pocket carrying.

I started out testing the H40 with the PNP VM3 coil which is .45 ohms and has a rated wattage of 25-35 watts. I found my sweet spot while using a lemon cookie mix at 6mg at 28 watts. I prefer a restricted direct lung type of vaping and was easily able to attain this at the 28 watt setting with the airflow about 1/3 open. Much higher wattage than that and it was too warm and was forced to open the airflow more but that’s not the type of draw that I wanted from it. I know Voopoo is saying that these coils are rated for 35ml of use but I’m not sure what that comes out to in puff count since not everyone takes the same length of puffs. What I do know is that I was impressed with a puff count of a little over 750 and the coil was still working fine. However, I felt it was time I needed to switch over to the second coil so I could give it enough time testing.

Second up was the PNP TW30 coil which is .3 ohms and rated for 28-36 watts. It seems to me that it would have made more sense to include a higher ohm coil and the MTL drip tip so that one could test both styles of use. However, I tested what I was given. I was still enjoying the lemon cookie so stuck with it for this coil also. I found myself running on the higher side with this coil at 34 watts and the airflow still about half open. Both coils gave very good flavor and vapor production. One thing that I was truly surprised by after a total of over 1000 puffs between both coils, there was almost no condensation in the pod opening and had zero leaking the entire time I tested the H40. I happen to have several boxes of the .45 ohm coils on hand so plan on keeping the H40 in rotation for some time.

The new upgraded PNP Pod II tank performed wonderfully in my opinion. The 5ml liquid capacity is much appreciated on an RDL/DL pod mod. Since the H40 has a maximum output of 40 watts it isn’t compatible with the full line of PNP coils but there are some options available. I personally am very comfortable in the 25-40 watt range of vaping and thoroughly enjoyed testing the H40.

I’d like to thank Voopoo and Nical for sending the Voopoo H40 Pod Mod kit for this review. It has been my pleasure. I would also like to thank the readers. This one might have gotten a little long. Below is a link to the Voopoo website where you can see the H40 as well as the rest of the Drag series of mods available.

DRAG H40-VOOPOO VAPE Spark Your Life

Maven $150
Wickd Bridg'd NFG v2 $120
Hazard $30

WTT For Uknwn or other Rba's
WTS add $5 for shipping

Heya veeps

42 y.o vaper from Indonesia here. Been vaping for almost 4 years now, it helped me quit the ciggy (was a smoker for almost 20 years). I enjoy DTL vaping, currently hooked on boro devices with rba's.


Quick question, i'll be visiting Perth, Western Australia in September. I'm well aware about the prescription to get nic juice rule. My question: is it legal to bring my boro devices (empty of course) through the airport? I did some research and already found a vape shop where they sell 0 nic juices and plan to get some there. Any help from Aussie veeps are greatly appreciated. Cheers!

Journey Black - Medieval Pie
Country of origin: Croatia
@Ispy package: 12/1
As you can see I've started testing another pack, courtesy of my fellow vaper @Ispy. A total of 12 mixed selections will be tested, of which there are sure to be favourites - read the attached descriptions.
A seemingly simple apple pie will be the first offering, which may not be as simple as you might think. According to the manufacturer, this recipe took the longest to develop of the whole series. They spent more than a year trying to create the perfect baked apple flavor, and after dozens of mistakes, they've succeeded, they claim . Apple pie with no cinnamon, minimal sweetening. The aroma pleasantly reproduces the lifelike smell of the sweetness just out of the oven. On the inhale, you get the juicy taste of apples, and on the way out, you also get the distinctive baked cakey topping, which makes the steam seem to transform into the cakey honey. You can feel the sweetness on the apple, but with longer steaming, the refined acidity comes out. The cake part is definitely the distinctive pie flavour, just sweetened by a little baking. Don't even look for the cinnamon in it, it's omitted from this version, but it's not missing, somehow it's not the focus. For me, using DL, the soup seems a bit dry, but maybe that's just me being a tease, as I couldn't fault it for anything else, even if I really wanted to. In a word, with or without cinnamon, the apple pie flavour remains a perennial favourite, but one thing is for sure, you should definitely try this version if you're into dessert vapours.

A Celebration of Excellence Named as Veynom, a testament to exceptional craftsmanship that celebrates the embodiment of traditional and cyber elements, delivering powerful performance, adjustable light effects, versatile vaping modes, advanced safety features, and premium materials. Rediscover your passion for vaping with the remarkable Veynom LX.

Brand:Aspire
Size: 129.6x34x28mm
Battery: 3200mAh (internal)
Display: 0.96in colour screen
Output: 1-100W (0.5-9V)
User modes: Auto, Wattage, Voltage, Bypass, Temperature Control (Ni, Ti, SS), CPS
Type C USB charging – 2A charge rate
Capacity: 5ml (standard) / 2ml (TPD)
Compatible with BP coil range
Rotate pod to adjust airflow
Screw to open top fill
6 lighting theme effects
Mechanical power switch
ASP Chipset

Click here for more:
Aspire Veynom LX Pod System Kit: Aspire Veynom LX Pod System Kit

Hello, dear friends. We've got some exciting news for you. The highly anticipated Puff Plus Zero Disposable Vape is here, and it's taking the vaping world by storm! If you're looking for an unforgettable vaping experience with zero hassle, this is the product you've been waiting for.

What sets the Puff Plus Zero Disposable Vape apart from the rest is its impressive 1000 puffs capacity. Yes, you heard it right! With this sleek and compact device, you can now enjoy 1000 long-lasting puffs of your favorite flavors. No more worrying about recharging or refilling your device; simply puff away until you've reached vaping nirvana.

The Puff Plus Zero is designed with convenience in mind. Its disposable nature means you don't need to deal with messy refills or charging cables. It's the perfect companion for your on-the-go lifestyle, and you can easily slip it into your pocket or bag without any fuss. Plus, its sleek design and array of vibrant colors make it a stylish accessory to complement your vaping experience.

But what really sets this disposable Disposable vape online store apart is its commitment to zero compromises on flavor and satisfaction. The Puff Plus Zero offers a wide range of delectable flavors that will tantalize your taste buds with every puff. Whether you're into juicy fruits, refreshing menthol, or rich desserts, there's a flavor for everyone.

Safety is paramount, and the Puff Plus Zero Disposable Vape takes it seriously. It's equipped with industry-standard safety features, including overheat protection and short-circuit protection, giving you peace of mind while you indulge in your vaping pleasure.

What about the environment, you ask? The Puff Plus Zero is eco-friendly and fully recyclable. You can enjoy your vaping experience guilt-free, knowing you're doing your part to reduce waste.

So, whether you're a seasoned vaper or new to the scene, the Puff Plus Zero Disposable Vape promises an unparalleled journey into the world of vaping. Its impressive 1000 puffs capacity, delicious flavors, and ultimate convenience make it a game-changer in the disposable vape market.

What are you waiting for? Grab your Puff Plus Zero Disposable Vapes today and elevate your vaping experience to new heights! Remember, with 1000 puffs at your fingertips, you're in for a wild ride of flavor exploration and satisfaction like never before. Happy vaping!

Related kits we recommend:
grape honeydew elf bar bc5000 ultra
strawberry watermelon peach elf bar bc5000 ultra for sale

Aspire Flexus AIO Pod Kit, the ultimate compact vaping companion! This all-in-one pod kit is packed with incredible features to elevate your vaping experience.

Powered by a robust 2000mAh built-in battery and equipped with the cutting-edge aspire ASP chipset, the Flexus offers reliable performance and precise control. Choose from Low, Medium, and High Wattage Modes to suit your vaping preferences.

With a generous 4ml pod capacity and a convenient top-filling design, refilling is a breeze. The adjustable airflow lets you customize your draw for maximum satisfaction. Crafted from durable zinc alloy, the Flexus boasts a sleek and stylish design.

Enjoy seamless activation with both button and draw activation options. Type-C charging ensures quick and efficient power replenishment. Paired with the AF Mesh Coil, this kit delivers exceptional DTL/RDTL vaping experiences.

Unleash your vaping potential with the Aspire Flexus AIO Pod Kit, where innovation meets performance in one dynamic package. And more best vapes will show at vape shop uk.

You may also like:
caliburn a3s uwell
gz2 caliburn

If you're also looking for the durability and convenience that vapes bring, this VASY Drag Disposable Kit is the way to go. The pattern of the exterior looks like a blend of pigments, quite a unique design. With a super-large 29ml Pre-Filled E-Liquid that can last 10,000 puffs, this revolutionary single-use cigarette can meet all your needs. See below for details.


Features
• Size: 79mm * 41mm * 19mm
• 20ml Pre-Filled E-Liquid
• 5%(50mg) Nicotine Strength
• Rechargeable 650mAh Battery
• Type-C Port (not included)
• Approximately 10000 Puffs
• 1.0ohm Double Mesh coil
• Draw-Activated
• MTL Vaping
• Battery & E-juice Screen

Small and compact design, easy to carry anywhere. Let you enjoy your favorite e-cigarette flavors anytime, anywhere. High-capacity battery, do not worry about the battery easy to run out. Up to 10000 puffs, the small screen in the middle of the device also displays the power and e-liquid status in real-time, so as to avoid sudden interruptions in the enjoyment of delicious food.

Easy operation of the equipment, without any buttons, a direct draw can be activated, and the more powerful 1.0ohm Double Mesh coil provides smooth and consistent steam production. Just the right 5%(50mg) of nicotine strength, neither too much harmful to the body nor retaining the throat feeling of nicotine, become the best substitute for cigarettes. More e-cigarette-related products can be purchased in vape shop online, strong product lines and high-quality logistics services, will not let you down.

Related product:
nicotine free elf bar
bot-it vapes

Uwell Caliburn AZ3 Pod System Kit

Caliburn AZ3 Kit is designed with a whole new form factor of ZEGA for pod system. ZEGA features Tube Pod or Square Pod, is a truly palm-sized pod with up to 50% smaller front surface area, yet an increment of over 20% battery capacity comparing previous Uwell Pod Systems. Uwell Caliburn AZ3 Kit features 3-step refill mechanism (U-Valve) and clear-view pod. It has 750mAh battery, 17W max power. In addition, Caliburn AZ3 also comes with the features of breath-like slow pulse LED indicator, auto draw, 2A fast charging. Uwell Caliburn AZ3 Pod Kit is compatible with Caliburn A3/A3S refillable pod 0.8Ω/1.0Ω.

Details:
1. With a whole new form factor ZEGA for pod system
2. Breath-like slow pulse LED indicator
3. 3-step refill mechanism (U-Valve) and clear-view pod
4. Auto draw, lanyard loop
5. 2A fast charging
6. Adjustment technology
7. Easy top filling




Uwell Caliburn GZ2 Pod System Kit

Caliburn GZ2 Kit is small, light, compact and powerful. It is powered by a built-in 850mAh battery with 17W max and Type-C 2A fast charging. It features tron-style RGB light, integrated on-pod precise airflow control (iAFC), 3-step refill mechanism (U-Valve), and clear view window. It also supports auto draw vaping to bring you convenient use. It is compatible with Uwell Caliburn G2 Cartridge that features 2ml capacity and easy top filling system. It is also fit for Uwell Caliburn G 0.8Ω/1.0Ω Coil, Uwell Caliburn G2 1.2Ω Coil.

Details:
1. Small and light, compact and powerful
2. Built-in 850mAh battery with 17W max
3. Tron-style RGB light effect
4. Integrated on-pod precise airflow control (iAFC)
5. 2ml capacity, clear view juice window
6. 3-step refill mechanism (U-Valve)
7. Fit for Caliburn G2 Cartridge
8. Fit for Caliburn G 0.8Ω/1.0Ω Coil and Caliburn G2 1.2Ω Coil

Hi, Today let's check out Drag H40 Pod Mod sent to me by VooPoo. In this Test I will examine each of the characteristics that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► VooPoo Drag H40 Pod Mod; Before starting, let's see together some special features indicated by the manufacturer:
• 1. Small and portable, compact and powerful
• 2. Built-in 1500mAh battery (Maximum power of 40W)
• 3. Adopts PnP POD 2 upgraded 5ml
• 4. Dual-in-one technology, PnP atomization platform
• 5. Compatible with all PnP Coils
• 6. Stepless 360 degree rotational airflow adjustment
• 7. Able to switch between MTL and DTL vaping
• 8. 0.56 inch OLED screen
• 9. 360-degree exquisite leather cover with comfortable grip



► Drag H40 Pod Mod; Packaging:
The package is two-tone blue/grey, the blue should indicate the color of the device inside and most likely each different color version of this kit will have the same color on its box as a reference. The front of the box bears the giant writing "DRAG H40" and also some indications on the main features of the device. On the back are listed; the content, the manufacturer's supporting references, legal notices, trademarks and logos. Above the remaining sides of the box you can see; Some main features in the form of icons, the QR-Code, the wording "Sample" to identify the devices in use to the reviewers, an image of this kit, a barcode, the color indication (Snow Blue), Scratch & Check.





► Drag H40 Pod Mod; Packing List:
• 1 * Voopoo Drag H40 kit
• 1 * 5ml PnP Pod 2 Cartridge
• 1 * PnP-VM3 0.45Ω Coil
• 1 * PnP-TW30 Coil 0.3Ω
• 1 * Type-C Charging Cable
• 1 * User Manual



► Drag H40 Pod Mod; Specifications:
• Product dimensions: 104.5x27.5x26.1mm
• Kit weight: 79g
• Material: Zinc Alloy + Leather + PCTG
• Battery capacity: 1500mAh included
• Output power: 5-40W adjustable
• Output voltage: 3.2V-4.2V
• Supported resistance range: 0.1-3.0Ω
• Charging: Type-C charging
• Pod Capacity: 5ml
• Airflow: Adjustable
• Cartridge: VOOPOO PnP Pod II updated version compatible with all PnP Coils



► Drag H40 Pod Mod; Available colours:
• Black
• Gunmetal
• Green
• Rose
• Snow Blue



► Drag H40 Pod Mod; First Impressions:
DRAG H40 is quite a small entry-level device, yet its max output of 40W undoubtedly allows users to start their journey to DTL vaping. The 5ml e-liquid capacity and 1500mAh battery capacity should be enough to reduce users' concern for frequent cell and cartridge refills. The newly adopted Dual In One technology in VooPOo's PnP Coils greatly increases the vaping efficiency, and the adjustable AFC system will provide users with adequate flavor for both MTL vaping and DTL vaping. The small 0.56 inch OLED display effectively shows users all the main information. In the image below you can appreciate the small size of DRAG H40 compared to DRAG S, the original progenitor of this successful series.



The tube form factor of Drag H40 Pod Mod is really user friendly and fits perfectly in the palm of your hand. With a base diameter of approximately 25mm the device stands steadily. On the bottom is the Type-C charging port. The Gene IA Chip supports 5V/1.5A charging and VooPoo recommends using the supplied cable. The internal 1500mAh battery takes about 70 minutes to fully recharge. With 28W of selected power I managed to make 325 Puffs before recharging the battery, and this seems like a really good result that confirms the goodness of the cell inside.



DRAG H40 also in its new guise in the shape of a small tube reconfirms the classic design engraved on the handle of the DRAG series. The upper layer of leather largely embraces the perimeter of the device, the general appearance is cleverly interspersed with bare zinc alloy parts, furthermore the zinc alloy gives Drag H40 great strength, without affecting too much the weight which remains pleasantly light (only 79g). All this benefits the great portability and pocketability of the device.



► Drag H40 Pod Mod; How to use:
On the front side of Drag H40 the "command bridge" protrudes in relief by a few millimeters compared to the body of the Mod and houses the control keys (Fire and Up / down) which are located respectively above and below the small but bright display.
*The Chipset through the combinations of use of the Fire and Up / Down keys allows the following combinations:
• 5 clicks on the Fire button to turn the mod on and off.
• Press the Fire key and the UP key simultaneously to lock/unlock the Mod
• To adjust the power in the range between 5 and 40W (in 1W steps per bush) press the "+" button or the "-" button.
• Press the Fire key and the Down key simultaneously to reset the Puffs counter



The Gene IA Chip also supports in this device two different power delivery modes which can be selected with 3 clicks on the Fire button to quickly switch between them. When the "Smart" mode is activated, the letter "S" appears on the display before the "W" symbol. When the "RBA" mode is activated, the letter "R" appears on the display before the "W" symbol.

• SmartMode:
Using the "Smart" mode, the chip identifies the PnP coil by automatically choosing the optimal power for it, avoiding the distracted user that the coil burns prematurely due to possible setting errors.

• RBA Mode:
Using the "RBA" mode the chip allows total freedom of power selection, this option can be useful when you decide to use the PnP regenerable RBA board that can be purchased separately.



► Drag H40 Pod Mod; Airflow control:
The circular compartment / pod previously introduced with Drag E60 consists of a rotating ring equipped with 3 metal spurs, created on purpose to fit on the crown gear profile which is placed on the lateral / lower surface of the new PnP Pod II cartridge. The contact pins are located on the bottom of the compartment. I have not found the classic automatic breath activation sensor and I think it will not be present in the final device either. However, the precision of the Fire key with its ideal location at your fingertips does not make me regret this lack.



The cartridge rotation mechanism inside the compartment/pod that I just described, allows the user to easily rotate the cartridge 360° to achieve the desired airflow without any additional additional steps. This regulation system gives the user the sensation of a system designed in a solid and intelligent way. The two vents are designed so that they can be adjusted one at a time independently, or both synchronously, meaning users can quickly get the switch from MTL to DTL with plenty of adjustment options in between on the grade. opening of the air flow. The metal ring also acts as a classic magnetic base to keep the cartridge firmly bound to the body of the mod. It is certainly worth applauding VooPoo both for the imagination and for the technical validity of this very valid air flow control system.





► Drag H40 Pod Mod; New PnP Pod II:
The strong point of this cartridge (as I said before) is that it is an integral part of a new air regulation system. The PnP Pod II cartridge features a mixed construction type, made of ultra-strong plastic and PCTG. The Pod has an e-liquid capacity of up to 5ml. The new updated PnP Pod II cartridge was released by VooPoo on July 3rd. According to VooPoo, the previous devices (DRAG E60 and DRAG H80S) will also ship with this updated CMF Pod. A nice aspect is that the Drag H40 PnP Pod offers the possibility to replace the original wide mouth 510 DL/RDL Drip Tip, with the optional narrow mouth 510 MTL Drip Tip. Also you can install any other 510 Drip Tip. I want to thank VooPoo for sending me two replacement cartridges along with the precious original MTL 510 Drip tip.



► Drag H40 Pod Mod; PnP Pod II Refil:
Compared to the previous RDL/DL cartridges supplied with Drag E60 and Drag H80S, there is a rather inexplicable small downgrade here, which consists in having abandoned the comfortable upper refill system for this version in favor of a more classic filling system of side/bottom type. In fact, now the e-liquid refill takes place by lifting the classic silicone rubber, this forces the user to remove the cartridge from the device to complete the refilling operation. However, if you prefer, you can use all previous versions of PnP pod-II cartridges for top-loading RDL/DL on the new Drag H40.



► Drag H40 Pod Mod; PnP Platforms:
DRAG H40 therefore becomes part of the DRAG POD MOD family. The family includes 9 different products; DRAG H40, DRAG E60, DRAG H80S, DRAG S, DRAG S PnP-X, DRAG S Pro, DRAG X , DRAG X PnP-X and DRAG X Pro. All these Drag Mods with their different cartridges and tanks offer the user the choice of a large number of PnP coils with the only limitation due to the different maximum power that can be supplied by each of these devices. So the range of PnP coils also includes the new PnP Coils of the TW series which have been specially made by VooPoo for this new generation of Drag all-in-one. The new TW Series PnP Dual in One Coils according to VooPoo offer high atomization efficiency, therefore providing the user with rich flavor, delicate taste with maximized vapor clouds. The test results show that this type of coil could effectively atomize about 35ml (7 pods) of e-liquid before being replaced with a new coil without any loss of flavor.





► Drag H40 Pod Mod; Vaping Test & Final Conclusions:
I used one of my favorite e-juices for this test, the "Crispy" which is a delicate natural Strawberry flavor intertwined with a creamy Cereal and Cream flavor. The composition on 100ml is as follows; 10ml of concentrated aroma + 90ml of VG-PG 70/30 base with 1.5mg/ml boost.

• PnP TW30 Mesh-Coil 0.3Ω Range 28-36W:
This very interesting Pnp is suitable for RDL / DL use and is the same that is present in the Drag E60 package. In SMART mode it is recognized and activated by the Chip Gene AI at 35W. However, the advice for greater durability over time is not to exceed the maximum wattage shown on the coil which is 36W. With the AFC open at 100% the vapor production is massive, however for my personal taste the flavor and the Hit increase exponentially with the AFC open at 50%. I haven't noticed any specific condensation problems. So as with all the other PnP-Pods, just dry the bottom of the compartment/pod from time to time; I dried after 3 days of use without there having been large accumulations of condensation.

• PnP-VM3 Coil 0.45Ω Range 25-32W:
The Chip Gene AI in SMART mode recognizes and activates this coil automatically at 28W and prevents you from selecting a power higher than 32W, avoiding possible burns of the cotton caused by carelessness. The 0.45Ω PnP-VM3 Coil allows greater energy savings compared to the previous one for a longer lasting vape, and if you are not a compulsive vaper the 1.500mAh internal battery will be plenty enough for you all day long. The PnP-VM3 Coil seems like the ideal choice to get a quiet and satisfying RDL vape, but you can also get a hot and aggressive MTL vape in the throat hit, full of flavor, and rich in clouds. This Mesh coil performs really well, activation is immediate. The Airflow System is able to perfectly calibrate the puff according to the user's needs. I like to use this coil with a selected power of 28W, also using the MTL Drip Tip and selecting the minimum power in combination with a small opening of the airflow I get a sufficiently fluid narrow delivery. I recommend (as always valid for all pod devices), to dry the bottom of the compartment with a cloth from time to time and not to leave the cartridge full of liquid inserted inside the Mod for too long.

The positive notes, as I have extensively described during the review, are many; I like the Drag H40 Pod Mod, and while there's nothing revolutionary about its looks and form factor, it works a treat! I think this is a really nice little gem, well built and well made. Its purchase will certainly be economical, and will satisfy all those who want to use this kit with satisfaction in a wide field ranging from MTL to RDL / DTL.

• Thanks to VooPoo for sending me Drag H40 Pod Mod for this Test.

• Thank you for reading.