Threads
UK Released: Vaporesso Veco Go Pod Kit
- VapesourcingUK
- 0 Replies
Vaporesso Veco Go Kit, equipped with a powerful 1500mAh built-in battery, this kit ensures extended vaping sessions without the need for frequent recharging.
The Veco Go Pod Kit features innovative Corex Heating Technology, delivering rapid and consistent heating for a satisfying vaping experience. With its adjustable airflow system, you have full control over your vaping style by simply switching the pod. Whether you prefer DL or MTL vaping, this kit caters to your individual preferences.
Paired with the 5ml VECO Go Pod, this kit offers ample e-liquid capacity to enjoy your favourite flavours throughout the day. The maximum 25W output guarantees dense clouds and rich flavour production, providing a truly immersive vaping experience.
Say goodbye to leaks and messes, as the vaporesso veco go pod vape kit uk incorporates anti-leaking and anti-messing mechanisms. You can now enjoy a clean and hassle-free vaping experience, keeping your device and surroundings neat and tidy.
The adjustable airflow feature allows you to customize the airflow to your liking, allowing for smoother draws and personalized vapour production. The neon battery indicator keeps you informed about the battery status at a glance, ensuring you never run out of power unexpectedly.
Thanks to the magnetic connection, the Vaporesso Veco Go Pod Kit is incredibly easy to assemble and disassemble, providing convenient access for refilling e-liquid and replacing the coil.
Its exceptional features, including Corex Heating Technology, adjustable airflow, and DL/MTL options, make it a reliable companion for all your vaping needs. Embrace the future of vaping with Vaporesso's cutting-edge technology and enjoy an elevated vaping experience like never before. And hope you can enjoy your vaping life at vape shops online.
Hot-sale vapes online:
vaporesso target 100 vape kit
best uwell crown b kit
The Veco Go Pod Kit features innovative Corex Heating Technology, delivering rapid and consistent heating for a satisfying vaping experience. With its adjustable airflow system, you have full control over your vaping style by simply switching the pod. Whether you prefer DL or MTL vaping, this kit caters to your individual preferences.
Paired with the 5ml VECO Go Pod, this kit offers ample e-liquid capacity to enjoy your favourite flavours throughout the day. The maximum 25W output guarantees dense clouds and rich flavour production, providing a truly immersive vaping experience.
Say goodbye to leaks and messes, as the vaporesso veco go pod vape kit uk incorporates anti-leaking and anti-messing mechanisms. You can now enjoy a clean and hassle-free vaping experience, keeping your device and surroundings neat and tidy.
The adjustable airflow feature allows you to customize the airflow to your liking, allowing for smoother draws and personalized vapour production. The neon battery indicator keeps you informed about the battery status at a glance, ensuring you never run out of power unexpectedly.
Thanks to the magnetic connection, the Vaporesso Veco Go Pod Kit is incredibly easy to assemble and disassemble, providing convenient access for refilling e-liquid and replacing the coil.
Its exceptional features, including Corex Heating Technology, adjustable airflow, and DL/MTL options, make it a reliable companion for all your vaping needs. Embrace the future of vaping with Vaporesso's cutting-edge technology and enjoy an elevated vaping experience like never before. And hope you can enjoy your vaping life at vape shops online.
Hot-sale vapes online:
vaporesso target 100 vape kit
best uwell crown b kit
New Arrival: SMOK Novo Bar AL9000 Disposable 15ml
- By Verashu
- Vapesourcing
- 0 Replies
If you pay more attention to good brands and high quality, you must try this smok novo bar al9000 disposable. The typical square box disposable shape has an unusual brand design. There are two smooth and contrasting color curves on the front of the vape, forming a stylish oblique rhombus, with Smok's signature swirling smoke pattern in the middle.
The Novo Bar AL9000 comes pre-filled with 15ml of vape juice, offering a satisfying vaping experience. It contains 50mg nic salt, which can be extended to 9000 puffs with the help of an 800mAh battery. Plus, it includes liquid & battery indicators and a USB-C port, making it a reliable companion for vapers.
Featuring a mesh coil, this rechargeable disposable kit produces excellent vapor and flavor, enhancing the overall vaping experience. With a maximum power output of 17W and a 0.77A charging current, this device delivers consistent performance and efficient charging. The airflow switch allows you to adjust the airflow to your preference, customizing the vaping experience to suit your needs.
If you are interested in this, online shop for vape welcomes you to buy it at any time.
You may also want to know:
SnowWolf Compak Disposable Vape 7500 Puffs
HOPO FLIPTIP Ultra Disposable Vape Kit 10000 Puffs 18ml
The Novo Bar AL9000 comes pre-filled with 15ml of vape juice, offering a satisfying vaping experience. It contains 50mg nic salt, which can be extended to 9000 puffs with the help of an 800mAh battery. Plus, it includes liquid & battery indicators and a USB-C port, making it a reliable companion for vapers.
Featuring a mesh coil, this rechargeable disposable kit produces excellent vapor and flavor, enhancing the overall vaping experience. With a maximum power output of 17W and a 0.77A charging current, this device delivers consistent performance and efficient charging. The airflow switch allows you to adjust the airflow to your preference, customizing the vaping experience to suit your needs.
If you are interested in this, online shop for vape welcomes you to buy it at any time.
You may also want to know:
SnowWolf Compak Disposable Vape 7500 Puffs
HOPO FLIPTIP Ultra Disposable Vape Kit 10000 Puffs 18ml
Dovpo Venus Nano Pod Kit | Reviews by Z-Lee
- By Z-Lee
- Device Reviews
- 4 Replies
Dovpo Venus Nano Pod Kit
Welcome ECFers! Today we'll be taking a look at the Venus Nano which Dovpo sent me for the purpose of a review. I did a review of the Limpid Pod device a while ago, and you can expect much of the same stuff in terms of performance that we saw with the Limpid. About the only things that are different are the battery size and thus the form factor of the pod mod.
I appreciate Joan over at Dovpo for setting me up for this review. As a reviewer, this critique will be conducted in a fair and honest manner.
Let's dive in!
→ OVERVIEW ←I appreciate Joan over at Dovpo for setting me up for this review. As a reviewer, this critique will be conducted in a fair and honest manner.
Let's dive in!
Colors:
From left to right, we have:
> Black
> Grey
> Purple
> Green
> Blue
> Brown
Features:
The main things to note about this device are the compact size, the coil pods (now having a 1.2Ω D2 coil pod available, as well) which are both compatible with the Limpid Pod kit, and the 1000 mAh battery which is a slight upgrade from the Limpid.
What's in the Box:
Each package contains:
> Dovpo Venus Nano Pod Mod
> Dovpo D2 Coil Pod (1.0Ω cartridge pre-installed)
> USB Type-C Charging Cable
> Lanyard
> User Manual
One thing to note, the lanyard that comes with the kit looks more like a synthetic rope with no logo instead of what you see above. To me, it's pretty cool that they added one to begin with, because most kits do not include one even if the device has a lanyard ring built into it.
Specs:
> Pod Mod: Internal 1000mAh Battery
> Product Size: 7*44.6*16.5mm
> Product Weight: 31g
> Cartridge Size: 24.9*14.7*21.67mm
> Wattage: 15W
> Charging Current: 650±mA (USB Type-C)
→ REVIEW TESTING & OBSERVATIONS ←
Intro:
The package the Venus Nano comes in is very small and compact. Even if it were to get banged around a bit during shipping, I have no doubts that it would still arrive in perfect working order.
I would consider the Venus Nano pod kit a starter kit. It has everything you'd need to start vaping minus the juice. A spare cartridge is not included with this kit, so be very, very careful that you allow the coil inside the pod to soak up the vape juice you've put in before you start to vape. If you see a bunch of bubbles when you fill the pod, it's working as intended. If you don'tsee bubbles, you should try sucking on the mouth piece a few times without it inserted into the pod mod to help aid the wicking process of the coil.
What comes in the package is more or less exactly as it's described. As I mentioned above, the lanyard doesn't look like the one advertised, but to me, that doesn't detract from the overall product itself. If you are a lanyard person, this might be something to keep in mind.
The USB Type-C cable that comes in the package is about a foot long which is pretty standard for cables that come with vape kits. If you're not an android phone user, this might be something to keep in mind if you're wanting a longer charging cable and don't already have one.
The User Manual has everything you'll want to know about the Venus Nano kit, including all of the LED indicators that will let you know the condition of your battery, and may help diagnose any issues you may run into with the device.
The Venus Nano Pod Mod:
The Venus Nano Pod Mod is very small. Measuring in width at only 4 and 1/2 centimeters, it will fit into your pocket very conveniently. The exterior is made of hard plastic which makes the Venus Nano very light in weight. If you were to drop it on accident, I don't believe there will be much of a consequence in terms of the functionality of the device simply because it weighs so little. Of course I don't recommend you testing this out repeatedly, because it will likely get scuffed up in the process.
The ribbed design makes it very easy to hold onto even if you have greasy fingers. I've even found myself spinning the device around in my fingers a bit because of the way it feels. I've noted above the location of the lanyard ring and the airflow hole. Be aware of where the airflow hole is in regard to how you hold the device. The Venus Nano has a very loose to loose MTL draw depending on if you're using the 1.0Ω cartridge or 1.2Ω cartridge respectively. There's also a 0.8Ω cartridge that I wasn't sent for testing, but I'd assume it has slightly more airflow than the 1.0Ω cartridge. If you find this airflow to be too loose for your liking, you can always cover the airflow with your finger just a bit to tighten the draw closer to your preference.
The top of the pod mod is where you'll insert the D2 cartridge. Inside you'll notice the standard brass-coated spring-loaded positive and negative pins, as well as the auto-draw sensor. This device can only be activated by auto-draw, so it's important to keep this section of the pod mod clear of liquids other than basic condensation. What you don't see here which you see on many pod devices, are magnets. Yep, this pod is held in with a skinny lip found on the pod which I noted as the "Minimum Line" below, that slides into grooves cut out of the pod mod.
On the bottom is where you'll find the USB Type-C charging port. Disregard the scratches you see - that's the plastic protective adhesive film the product is shipped with. When peeled off, there's a nice and shiny gloss finish. The 1000 mAh battery is advertised to fully recharge in only 20 minutes, and that I cannot agree on. If you use this converter, charging a 1000 mAh lithium-ion battery at 650 mA, you're looking at closer to 1.6 hours. I tested the charging speed myself, and it ranges between 0.5 and 0.6 mA which is actually a bit below the stated charging speed. That in itself isn't uncommon, but the advertised 20 minutes is a far stretch from an hour and 36 minutes. I tested the charging myself and ended up at around an hour and a half. This amount of time is pretty common for most pod devices with smaller batteries like this one. The Venus Nano does support pass-through vaping, so if you're charging it and want to take a few puffs, you can do so.
On both sides of the USB port, are two blue LEDs. When taking a puff, these will light up. Removing the pod will cause it to blink 3 times, and putting a pod in will make it blink once. While charging, the light will remain blue until it's fully charged, and then the light will turn off.
There is also a child-protection lock available, but it's a bit of a hassle. Plug the USB Type-C cable in, and then pull and push the pod out and in 5 times, and the device will not function. To reactivate it, do this again and it will unlock the device.
The D2 Cartridge:
The ribbed design makes it very easy to hold onto even if you have greasy fingers. I've even found myself spinning the device around in my fingers a bit because of the way it feels. I've noted above the location of the lanyard ring and the airflow hole. Be aware of where the airflow hole is in regard to how you hold the device. The Venus Nano has a very loose to loose MTL draw depending on if you're using the 1.0Ω cartridge or 1.2Ω cartridge respectively. There's also a 0.8Ω cartridge that I wasn't sent for testing, but I'd assume it has slightly more airflow than the 1.0Ω cartridge. If you find this airflow to be too loose for your liking, you can always cover the airflow with your finger just a bit to tighten the draw closer to your preference.
The top of the pod mod is where you'll insert the D2 cartridge. Inside you'll notice the standard brass-coated spring-loaded positive and negative pins, as well as the auto-draw sensor. This device can only be activated by auto-draw, so it's important to keep this section of the pod mod clear of liquids other than basic condensation. What you don't see here which you see on many pod devices, are magnets. Yep, this pod is held in with a skinny lip found on the pod which I noted as the "Minimum Line" below, that slides into grooves cut out of the pod mod.
On the bottom is where you'll find the USB Type-C charging port. Disregard the scratches you see - that's the plastic protective adhesive film the product is shipped with. When peeled off, there's a nice and shiny gloss finish. The 1000 mAh battery is advertised to fully recharge in only 20 minutes, and that I cannot agree on. If you use this converter, charging a 1000 mAh lithium-ion battery at 650 mA, you're looking at closer to 1.6 hours. I tested the charging speed myself, and it ranges between 0.5 and 0.6 mA which is actually a bit below the stated charging speed. That in itself isn't uncommon, but the advertised 20 minutes is a far stretch from an hour and 36 minutes. I tested the charging myself and ended up at around an hour and a half. This amount of time is pretty common for most pod devices with smaller batteries like this one. The Venus Nano does support pass-through vaping, so if you're charging it and want to take a few puffs, you can do so.
On both sides of the USB port, are two blue LEDs. When taking a puff, these will light up. Removing the pod will cause it to blink 3 times, and putting a pod in will make it blink once. While charging, the light will remain blue until it's fully charged, and then the light will turn off.
There is also a child-protection lock available, but it's a bit of a hassle. Plug the USB Type-C cable in, and then pull and push the pod out and in 5 times, and the device will not function. To reactivate it, do this again and it will unlock the device.
The D2 Cartridge:
The D2 cartridge comes available in three different resistences, a 0.8Ω coil pod cartridge, 1.0Ω coil pod cartridge, and 1.2Ω coil pod cartridge. The Venus Nano pod kit comes with a 1.0Ω cartridge and no spare pods. I'm sure they do this to reduce the cost of the kit, but it's quite easy to roast a coil, especially if you're a beginner. It is my belief that all starter kits should have a spare coil/cartridge, but it is what it is. When purchasing additional D2 coil pod cartridges, be aware that there are 0.8Ω, 1.0Ω, and 1.2Ω variations. The 1.2Ω cartridges are going to have a slightly tigher draw, and will last a bit longer when it comes to puffs per battery life than the 0.8Ω and 1.0Ω options.
It's important to note that "cartridge" in regard to the Venus Nano means a pod with a non-removeable coil. When the coil burns out, you toss the entire pod. I like to call it a coil pod because it's a pod with a non-removeable coil. I wouldn't consider this standard terminology, however. I've also seen the term "cartridge" used in reference to a pod with a removeable coil, so be aware of this ambiguity when deciding on what kind of device you're looking for.
To access the refill port, simply push the black mouth piece back and forth a bit to loosen it and then remove it from the pod. Underneath the black mouth piece, you'll find a tethered rubber plug shown in the bottom two pictures above. Unfortunately there's nothing on the rubber plug denoting which side to pull up on, so you'll have to look into the tank portion of the pod and find the end with the wider plug. To help you figure this out, if you see the name "DOVPO" on the pod, pull from the left side. If you don't see DOVPO like in the pictures above, then pull from the right side. The size of the refill port very easily fits a chubby gorilla sized bottle nozzle inside of it. Just be sure not to overfill the pod as it fills very quickly toward the top.
The "Minimum Line" is marked by a faint ridge that sits just below the top of the pod mod when you've inserted the pod. I wouldn't recommend allowing your juice to get this low, as it often leads to leaking/draining of your pod down into your pod mod. I had this happen with the inital pod that came with the kit which is my fault, but it caused leakage down in the auto-draw section of the pod mod and had to be cleaned out. If you see your juice levels dipping below the top of the pod mod while the pod is inserted, I'd recommend topping it off to avoid this happening.
Replacement D2 Cartridges:
→ FINAL THOUGHTS, PROS/CONS, AND RATING ←
I've been testing this device for about a month now. Overall, the Dovpo Venus Nano has been quite pleasant for an MTL vape. I've tried vaping this in RDL and the coils always end up giving a burnt taste. Go back to vaping in MTL, and they taste just fine. I don't notice a huge difference between the 1.0Ω pod and the 1.2Ω pod. Maybe a slightly more open draw from the 1.0Ω pod, but the flavor output is about the same. You'll get slightly more battery life out of the 1.2Ω pods, so I'd recommend going that route but go with whatever works best for you. Overall, like I mentioned in the Limpid review, I'm going to guess that you're going to get anywhere between 500 to 700 puffs per cartridge. I've had to replace mine due to leaking issues which often happens once the coil gets closer to the end of its life. That's more or less me pushing the life of the coil as far as it can go, so I wouldn't consider the leaking normal wear and tear. The availability to turn this device completely off is nice, but is slightly tedious.
Dovpo currently has the Venus Nano kit for sale at $14.99 as of the posting of this review. The D2 cartridges are sold for $5 in pairs.
+ + Pros + +
∎ No leaking
∎ Pocket-friendly
∎ Well-built
∎ Easy to hold
∎ Consistent vape
∎ Auto-Draw is sensitive
∎ Mouth piece feels good between the lips
∎ Mouthpiece removes easily
∎ Very easy to see various juice levels
∎ 1000 mAh internal battery
∎ USB Type-C charging (0.5-06A verified)
∎ Good bang for your buck
∎ Ability to turn the device completely off
- - Cons - -
∎ Only one cartridge in the kit
∎ Refill plug has no indicator for which side to pull up on
∎ Turning the device completely off is a bit of a hassle
+ - Considerations - +
∎ Comes with a lanyard
∎ No power options other than coil resistance
∎ No airflow options - loose MTL (unless you use your fingers)
∎ Pod can be difficult to pull out with slick fingers
∎ No battery status indicators
Overall Rating:
8
I hope I covered everything you'd want to know about the Dovpo Venus Nano pod kit. It's been fun testing this out and I think it's a great product for MTL vapers if you're looking for something on-the-go that's very compact and portable. None of the cartridges have been duds so far, and that's awesome. I would expect a higher level of QC from Dovpo over other brands, but that's what keeps me coming back for their products. I appreciate Joan over at Dovpo for setting me up with this review, and hopefully there will be more to come.
Cheers and happy vape hoarding!
Frooty vanilla cupflake
- E-Liquid Recipes
- 0 Replies
Minimum of 14 days steep. This is sweet creamy smooth vape, a nice delicious flavor blend of fruit flakes and cream with notes of vanilla. Its my next favorite to the banana cream flavor I made, out of about 20 or so off the cuff juices I've concocted so far... this is a winner.
DOVPO TRIBUTE 21700 MOD review by hittman
- By hittman
- Device Reviews
- 19 Replies
Hello again folks. I’m happy to be back with you today to attempt to provide you with a fair and honest review on the Dovpo Tribute 100W Mod that was sent to me by Dovpo. The Tribute can use a single 21700 or 18650 with the included adapter. As you can tell from the name the Tribute has a maximum output of 100 watts but also has a 3A fast charging circuit. It has a .96”TFT display and has a full spectrum of features including Power, Voltage, Temp Ni, Temp Ti, and Temp SS. Besides all of this which I guess these days is kind of standard on a lot of mods, it also is really sharp looking and gives off a feel a high end quality mod and is made of zinc alloy and ABS. Sounds pretty good right? Let’s take a look at some promotional information and I’ll give my thoughts on it.
WHAT’S IN THE BOX?
1* Tribute Box Mod
1* USB Type-C Cable
1* Instruction Manual
1* 18650 Adapter
SPECIFICATIONS:
FEATURES:
1. Single external 21700 battery with 100W max
2. Equipped with 18650 battery adaptor
3. Supports 3A Type-C fast charging
4. 0.96'' TFT full color display screen
5. Power/Voltage/Temp-Ni/Temp-Ti/Temp-SS mode
6. 3.2V-4.2V voltage range for excellent performance
7. 0.08Ω-3.5Ω resistance range to fit for various tanks and coils
INITIAL THOUGHTS:
The packaging on the Tribute is a little different from what I’ve seen from Dovpo in the past but really like it. They usually do a nice job on presentation. The box isn’t over done on branding like some other companies do. The front has the Dovpo and Tribute names done tastefully with the Dovpo website listed near the bottom. The side of the box give a list of a few features for the Tribute and the back side has the contents list, a warning and company information for Dovpo. The box isn’t the usual two part box with a top that lifts off but instead slides out from the side with the user manual on top and the mod and USB-C cable underneath. As you can see from the last picture below, I received the Silver/Grey version for my review.
The 510 connection plate is positioned to the front of the mod that is nearest the fire button. The plate is held in by two torx head screws and it appears that there is some sort of seal around the outside edge of the 510 center pin which is plated and spring loaded. The Tribute can handle up to about a 25mm tank without any overhang.
The bottom of the mod has the Dovpo insignia and name printed on it along with the CE certification. This is the only branding on the mod besides the Dovpo name being on the display in a very small font that I will show you later.
The battery compartment for the Tribute is a C Frame style that loads from the back side. I personally like this style of battery loading design very much. In the picture below you can see the 18650 battery adapter with the Dovpo name printed on it that is found inside the battery compartment when you open the cover for the first time. I always use a 21700 battery when the option is available. The battery polarity is clearly marked inside the tray and the contacts are plated. The top contact is spring loaded and it’s a little bit tight since the mod isn’t a lot taller than the battery. The battery cover has two magnets, one on top and one on bottom. They hold the door on very securely and there is absolutely no movement in the battery cover on the sample I received. It is very precisely built with no wiggle. I think it would have been nice if there was a battery strap installed on the Tribute to make battery removal a little easier. It’s a pretty tight fit and can be a little tough to get the battery out without damaging the wrapper.
As I mentioned earlier, there is no branding on either side of the Tribute. There are three vertical grooves cut into the sides of the battery cover that meet up with the body of the mod which is made of zinc alloy that gives it a nice weight to it. Without a battery I measured the weight at 161.48 grams and with a 21700 battery installed it weighed in at 227.76 grams.
The face of the Tribute has a round fire button that is just barely raised from being flush with the face which makes it less likely to be accidentally fired when carried. Below that is the .96” TFT display screen followed by the + and – buttons installed side by side and the USB-C charging port near the bottom. The display screen shows the following information.
The specifications on the Tribute are a little vague in my opinion and many might wonder if it does or doesn’t contain a boost circuit. I switched the mode to Voltage and was able to run the voltage up to 8.5 volts despite the specifications listing the operating voltage as 3.2-4.2v. So it does in fact contain a boost circuit although I don’t know why it wasn’t listed in the specifications.
Like most quality mods these days, the Tribute does have built in safety protections. They are as follows.
FINAL THOUGHTS:
When I think of Dovpo mods, I think of quality made devices. I have reviewed and purchased many Dovpo mods over time and every one of them has had a good build quality. The Tribute is no exception. I don’t really know for sure how many C frame mods I have in my stash but the Tribute probably has the best fit on the battery cover that I can remember. There’s no movement and it is almost a seamless fit with the body. To me the Tribute seems pretty small for a 21700 mod. It is very comfortable to hold whether I fire it with my thumb or index finger. The firing reaction speed seems ok to me. I didn’t really notice a lag or anything from when I pressed the fire button until the coil activated.
For my testing it seemed only fitting to get out my Blotto single coil rta. It was a very good match as far as size and didn’t overhang. I ran a .35 ohm Ni80 Clapton coil in the rta and felt like the firing time was fairly responsive at 45 watts. I started out around 32 watts to break in the coil but it definitely needed more power to heat it properly. I could have easily pushed the wattage higher on this coil and the Tribute could handle it just fine but if I chain vaped at all then the vapor got a little too warm for me.
The Tribute does in fact have a boost circuit that will run up to 8.5 volts. I tested it in voltage mode and also ran the coil in the Blotto higher than I would normally in wattage mode to make sure it was boosting there. This tank doesn’t have huge airflow but did run it high enough to get over 4.5 volts so I am confident that the boost is working.
I only have one complaint on the Tribute and that is because of my age and visual acuity. The wattage setting is plenty big but I honestly cannot read the rest of the numbers on the display without my reading glasses. To me there is a lot of dead space on the top and bottom of the display window that could have been used to enlarge the display and increase the font size. It’s not that important to see the other numbers but would be nice to read the puff counter without assistance.
Overall I have thoroughly enjoyed testing the Dovpo Tribute. I would definitely recommend this one if you are looking for a solid 21700 mod that has a nice weight to it without being very large. I found the Tribute to be very comfortable to hold and fire whether thumb or finger firing and the fire button makes a nice click sound when pressed.
I’d like to thank Dovpo and Joan for sending the Dovpo Tribute Mod for this review. As always, thanks to the readers for taking the time to read my reviews. Below is a link to the Dovpo website for your viewing pleasure. Feel free to look around at everything they have to offer.
Experience the Power and Performance of Tribute Box Mod – DOVPO
WHAT’S IN THE BOX?
1* Tribute Box Mod
1* USB Type-C Cable
1* Instruction Manual
1* 18650 Adapter
SPECIFICATIONS:
| Battery Type | Single external 21700 high-drain battery (Not included) |
| Battery Adaptor | 18650 battery adaptor |
| Charging | 3A Type-C fast charging |
| Charging Current | 1000mA |
| Output Power | 5.0W-100W |
| Working Voltage | 3.2V-4.2V |
| Resistance under Wattage Mod | 0.08Ω-3.5Ω |
| OLED Display | 0.96" TFT screen |
| Threaded Connection | 510 |
| Size | 42.5*26.6*86.2mm |
| Material | Zinc Alloy+ABS |
| Color | Silver Gray, Black Gunmetal |
FEATURES:
1. Single external 21700 battery with 100W max
2. Equipped with 18650 battery adaptor
3. Supports 3A Type-C fast charging
4. 0.96'' TFT full color display screen
5. Power/Voltage/Temp-Ni/Temp-Ti/Temp-SS mode
6. 3.2V-4.2V voltage range for excellent performance
7. 0.08Ω-3.5Ω resistance range to fit for various tanks and coils
INITIAL THOUGHTS:
The packaging on the Tribute is a little different from what I’ve seen from Dovpo in the past but really like it. They usually do a nice job on presentation. The box isn’t over done on branding like some other companies do. The front has the Dovpo and Tribute names done tastefully with the Dovpo website listed near the bottom. The side of the box give a list of a few features for the Tribute and the back side has the contents list, a warning and company information for Dovpo. The box isn’t the usual two part box with a top that lifts off but instead slides out from the side with the user manual on top and the mod and USB-C cable underneath. As you can see from the last picture below, I received the Silver/Grey version for my review.
The 510 connection plate is positioned to the front of the mod that is nearest the fire button. The plate is held in by two torx head screws and it appears that there is some sort of seal around the outside edge of the 510 center pin which is plated and spring loaded. The Tribute can handle up to about a 25mm tank without any overhang.
The bottom of the mod has the Dovpo insignia and name printed on it along with the CE certification. This is the only branding on the mod besides the Dovpo name being on the display in a very small font that I will show you later.
The battery compartment for the Tribute is a C Frame style that loads from the back side. I personally like this style of battery loading design very much. In the picture below you can see the 18650 battery adapter with the Dovpo name printed on it that is found inside the battery compartment when you open the cover for the first time. I always use a 21700 battery when the option is available. The battery polarity is clearly marked inside the tray and the contacts are plated. The top contact is spring loaded and it’s a little bit tight since the mod isn’t a lot taller than the battery. The battery cover has two magnets, one on top and one on bottom. They hold the door on very securely and there is absolutely no movement in the battery cover on the sample I received. It is very precisely built with no wiggle. I think it would have been nice if there was a battery strap installed on the Tribute to make battery removal a little easier. It’s a pretty tight fit and can be a little tough to get the battery out without damaging the wrapper.
As I mentioned earlier, there is no branding on either side of the Tribute. There are three vertical grooves cut into the sides of the battery cover that meet up with the body of the mod which is made of zinc alloy that gives it a nice weight to it. Without a battery I measured the weight at 161.48 grams and with a 21700 battery installed it weighed in at 227.76 grams.
The face of the Tribute has a round fire button that is just barely raised from being flush with the face which makes it less likely to be accidentally fired when carried. Below that is the .96” TFT display screen followed by the + and – buttons installed side by side and the USB-C charging port near the bottom. The display screen shows the following information.
- Dovpo name and battery level indicator
- Set wattage
- Output voltage while firing and coil resistance
- Lock/Unlock symbol
- Length of time of current puff
- Puff counter
- Press the fire button 5X to turn the mod on/off
- Press the fire button 3X to enter the menu system where the following settings are available
- Power
- Voltage
- Temp Ni
- Temp Ti
- Temp SS
- Bright
- Stats
- Colour
- Exit
- Press the + and – buttons to lock the adjustment buttons
- Press the fire button and – button to lock/unlock the fire button
The specifications on the Tribute are a little vague in my opinion and many might wonder if it does or doesn’t contain a boost circuit. I switched the mode to Voltage and was able to run the voltage up to 8.5 volts despite the specifications listing the operating voltage as 3.2-4.2v. So it does in fact contain a boost circuit although I don’t know why it wasn’t listed in the specifications.
Like most quality mods these days, the Tribute does have built in safety protections. They are as follows.
- Reverse polarity protection
- No load protection
- Short circuit protection
- Over-time protection(10s)
- High temperature protection
- Low voltage protection
FINAL THOUGHTS:
When I think of Dovpo mods, I think of quality made devices. I have reviewed and purchased many Dovpo mods over time and every one of them has had a good build quality. The Tribute is no exception. I don’t really know for sure how many C frame mods I have in my stash but the Tribute probably has the best fit on the battery cover that I can remember. There’s no movement and it is almost a seamless fit with the body. To me the Tribute seems pretty small for a 21700 mod. It is very comfortable to hold whether I fire it with my thumb or index finger. The firing reaction speed seems ok to me. I didn’t really notice a lag or anything from when I pressed the fire button until the coil activated.
For my testing it seemed only fitting to get out my Blotto single coil rta. It was a very good match as far as size and didn’t overhang. I ran a .35 ohm Ni80 Clapton coil in the rta and felt like the firing time was fairly responsive at 45 watts. I started out around 32 watts to break in the coil but it definitely needed more power to heat it properly. I could have easily pushed the wattage higher on this coil and the Tribute could handle it just fine but if I chain vaped at all then the vapor got a little too warm for me.
The Tribute does in fact have a boost circuit that will run up to 8.5 volts. I tested it in voltage mode and also ran the coil in the Blotto higher than I would normally in wattage mode to make sure it was boosting there. This tank doesn’t have huge airflow but did run it high enough to get over 4.5 volts so I am confident that the boost is working.
I only have one complaint on the Tribute and that is because of my age and visual acuity. The wattage setting is plenty big but I honestly cannot read the rest of the numbers on the display without my reading glasses. To me there is a lot of dead space on the top and bottom of the display window that could have been used to enlarge the display and increase the font size. It’s not that important to see the other numbers but would be nice to read the puff counter without assistance.
Overall I have thoroughly enjoyed testing the Dovpo Tribute. I would definitely recommend this one if you are looking for a solid 21700 mod that has a nice weight to it without being very large. I found the Tribute to be very comfortable to hold and fire whether thumb or finger firing and the fire button makes a nice click sound when pressed.
I’d like to thank Dovpo and Joan for sending the Dovpo Tribute Mod for this review. As always, thanks to the readers for taking the time to read my reviews. Below is a link to the Dovpo website for your viewing pleasure. Feel free to look around at everything they have to offer.
Experience the Power and Performance of Tribute Box Mod – DOVPO
Banana cream
- E-Liquid Recipes
- 0 Replies
I made this as an experiment. It's mainly bannana cream flavor but the berry notes do come through. I really like sweet liquid, or maybe I'm just blind to sweetness. So you can adjust the sweetness level to your liking if this is too much. I like to taste my liquid throughout the process to see what's going on. The banana was op up until about day 7. I did not use the hot water bath method, I keep my liquids in a room with no AC on yet so temp has been anywhere between 60-85 degrees during the steep process. 7 days is where everything seemed blended very nicely. I did initially want to let it steep longer, but I liked it so much it was gone before that. The liquid has turned a light almost orange color with almost a pink tinge after 7 days.
Uwell Caliburn a3s review
- Device Reviews
- 0 Replies
Uwell Caliburn a3s review
Thanks to sourcemore for sending me this product to review!
Uwell Caliburn A3S Pod Kit 16W 520mAh
They have also send me a discount code to share with you, to get the device for an amazing price: UCA3S use this code to get it for only $13.59
Disclaimer: This review is my own thoughts and I am not associated with anyone at sourcemore, nor am I being paid to write this review.
The caliburn a3s is a minimalistic device, no button, no airflow control, you just put your pod in and start vaping. A very easy and user-friendly experience.
Specs:
- Compatible with Pods of Caliburn A3
- Animated Light Matrix
- Convenient Side Refilling
- 5V/2A Fast Charging
- Battery capacity: 520mAh
- E-Liquid Capacity: 2ml
The packaging includes:
- Caliburn A3s Device
- Meshed 0.8ohm pod (pre-installed)
- Meshed 1.0ohm pod (spare)
- User manual
Design
The design is not one we haven’t seen before. Uwell seems to know what works for their Caliburn devices and stay in the same type of designs for the line. I only have the A2 myself to compare it to, and it looks close to that, size is identical. The pods are new, though, with a curve at the bottom. I do like this design for the pods better, but it’s unfortunate that they don’t fit on the previous Caliburns, but I’ll talk more about this later.
At first I wondered where the battery indicator on the device would be. It was only when I started using it that I saw the new pattern light they used for it. The entire word “Caliburn” lights up in either green, blue or red (depending on your battery percentage) in a beautiful patterned way.
Pods
If you have personally used a caliburn device before, this one hits similarly. The hit was never the problem with caliburn, those have always been amazing, but these pods do not leak. I haven't personally experienced any leaks, which I did have with my caliburn pods from a previous before this one. The pods do have side fill instead of top-fill, which doesn't bother me, but could be seen as either a pro or a con to some, so it's definitely something to keep in mind. It's unfortunate Uwell decided not to make the pods between the a2(s) and the a3(s) compatible. This could stop people who still have a lot of old pods from upgrading, other than that I’d say go for it.
Flavor
I don't use juices with a lot of flavor, but even I can feel that the flavor on this device is definitely in the top tier for pod devices. With a brand new pod, some might even say it’s too strong, but once the pod is broken in a little, it’s a smooth and flavorful experience. I honestly feel like over the first few refills, the flavor only kept getting better. It’s after about 8-10 refills that the flavor is slowly getting less, but still it tastes like the pods have a long life ahead of them, before possibly burning out.
Performance
The device has a comfortable mouth-to-lung draw. I think it would be a very enjoyable experience for people trying to quit cigarettes, or if you just like that cigarette-type draw. The battery is relatively small for a pod device, but I think it’s one of the most honest ones. The battery actually being 520mAh seems legit. It almost gets me through a full day, but does get me through my working hours, so I can just charge when I get home. The green led means you still have over 60% of battery, the blue one means you have over 30 and the red one means you have less than 30% battery left.
I can’t really say if the lack of airflow is a pro or a con to me. It makes the device look and feel simplistic, without any hassle to it, which I think is exactly what Uwell is going for with these S devices. And because of that it’s a really good contender for people who want to stop wasting money on disposable devices.
Pros
- Good-looking design
- Flavor
- Good, warm vapor production
- Leak-free pods
- Beginner-friendly
- Quick charge
Cons
- Pods aren't compatible with the previous caliburn
- Relatively small battery
Verdict
The caliburn a3s is a great pod device, one that I would definitely recommend picking up to anyone starting out who doesn't have a refillable vape yet. It is so easy to use and just overall beginner friendly. It’s definitely a bit of an upgrade from the devices before this one, especially for the pods, because those are not leaking whatsoever. The battery is also fully charged quicker and even though they all have the same 520mAh this one seems to last longer. If you already have a caliburn that’s needed for an upgrade or you just want a spare, this could definitely be the device for you. But also if you’re wanting to quit disposables or even smoking cigarettes, I would recommend this. It definitely outperforms a lot of the pod vapes that are in the same or even higher price ranges.
This was my review, once again a big thank you to sourcemore and don’t forget to check out their website and use the discount code at the top of the review if you decide to pick this pod up!
Coming Soon!! ThunderHead Creations Tauren Mech / X Chip Boro Mod 3.5ml
- By vapbig
- HealthCabin
- 0 Replies
The Tauren Boro Mod - X chip version is the Global FIRST Boro Mod with removable -X-chip design in the world. The 2-In-1 design ensure you to choose either the Full Mech Mode or Safety Protection Mode as per your preferance.
Features:
1. Global First Boro Mod in Two Modes
2. 2 In 1 Design W/Detachable -X-Chip(Full Mech Mode & Safety Protection Mode)
3. Elegant & Compact Mini Size 18650/20700/21700 Battery Compatible
4. Build Deck included
5. 510 Drip Tip
6. Boro Tank Compatible
7. Multifunctional Wrench Included
8. 510 Adaptor Included
9. Configuring full 24K plated inside for strong connection
10. Unique & Limited Series Number
Click here for more:
ThunderHead Creations Tauren Mech / X Chip Boro Mod 3.5ml: ThunderHead Creations Tauren Mech / X Chip Boro Mod
Features:
1. Global First Boro Mod in Two Modes
2. 2 In 1 Design W/Detachable -X-Chip(Full Mech Mode & Safety Protection Mode)
3. Elegant & Compact Mini Size 18650/20700/21700 Battery Compatible
4. Build Deck included
5. 510 Drip Tip
6. Boro Tank Compatible
7. Multifunctional Wrench Included
8. 510 Adaptor Included
9. Configuring full 24K plated inside for strong connection
10. Unique & Limited Series Number
Click here for more:
ThunderHead Creations Tauren Mech / X Chip Boro Mod 3.5ml: ThunderHead Creations Tauren Mech / X Chip Boro Mod
Klypse ZIP - Pocket-sized Satisfaction
- Innokin Technology
- 1 Replies
The Klypse ZIP is the ultimate pocket-sized evolution of the Klypse, offering superior flavor, outstanding value, and extreme portability! ️
Sporting a secure dustproof cap, 650mAh battery, USB-C charging, built-in lanyard hole, and more, the Klypse ZIP is a perfect pocket-sized companion for all your vaping needs throughout the day.
Compatible with both refillable and NEW pre-filled Klypse Pods! Enjoy your favorite e-liquids with 0.8ohm and 1.2ohm refillable mesh coil pods, or experience the convenience and delicious flavor out of our new Klypse C1 1.7ohm pre-filled pods.
Ultra-compact and affordable, the Klypse ZIP launches in 8 premium and elegant finishes with 16 pre-filled pod flavors to try!
Sporting a secure dustproof cap, 650mAh battery, USB-C charging, built-in lanyard hole, and more, the Klypse ZIP is a perfect pocket-sized companion for all your vaping needs throughout the day.
Compatible with both refillable and NEW pre-filled Klypse Pods! Enjoy your favorite e-liquids with 0.8ohm and 1.2ohm refillable mesh coil pods, or experience the convenience and delicious flavor out of our new Klypse C1 1.7ohm pre-filled pods.
Ultra-compact and affordable, the Klypse ZIP launches in 8 premium and elegant finishes with 16 pre-filled pod flavors to try!
Aspire Proteus Neo E-hookah Head will come very soon
- By Aspire_Tina
- Aspire
- 0 Replies
Elevate Every Puff. With the Proteus Neo, every inhalation transports you to a world of pure hookah bliss. Immerse yourself in the dense clouds of vapor, relishing the same sensation and enjoyment as traditional hookah, but with the convenience of a portable device.
More information on our website: Proteus Neo
More information on our website: Proteus Neo
A++++++ Super Positive for TraderX
- By Kprthevapr
- Classified Feedback
- 0 Replies
Super Positive A+++++!
TraderX is the man! Super fast shipping arrived as described. Thanks again for being a great member.
TraderX is the man! Super fast shipping arrived as described. Thanks again for being a great member.
Pre-Order!! Smoant LEVIN Pod system Kit 1000mAh 2ml
- By vapbig
- HealthCabin
- 0 Replies
The LEVIN is powered by a built-in 1000mAh battery with a maximum output of 30w. The kit features slider airflow control system that can adjust airflow to provide you with MTL and RDL vaping modes. What's more, it comes with constant voltage output, making you enjoy the best taste from first puff to the last. Besides, it adopts stunning indicator light, which emerges a colorful glitter when inhaling, making your vaping experience even more fun.
Features:
1. One-step Refilling Operation
2. Special Surface Process
3. Airflow Control System
4. Upgraded Heating Material
5. Stunning Indicator Light
6. Constant Voltage Output
Click here for more:
Smoant LEVIN Pod system Kit: Smoant LEVIN Pod Kit
Features:
1. One-step Refilling Operation
2. Special Surface Process
3. Airflow Control System
4. Upgraded Heating Material
5. Stunning Indicator Light
6. Constant Voltage Output
Click here for more:
Smoant LEVIN Pod system Kit: Smoant LEVIN Pod Kit
Sourcing Quality
- Vape4ever
- 0 Replies
If you're wondering where to buy cart batteries, look no further. This link directs you to a vast collection offering reliable and high-performing batteries.
Refreshing Chill
- Vape4ever
- 0 Replies
Revel in the crisp and invigorating taste of watermelon ice Escobar. A perfect choice for those seeking a refreshing vaping experience.
Effortless Juice Change
- Vape4ever
- 1 Replies
Uncover the art of how to change vape juice in your device. This detailed guide walks you through the process ensuring a clean and flavor-rich vaping experience.
UK Vape: Vaal AOP Bar Disposable Vape 1000 Puffs
- VapesourcingUK
- 0 Replies
Vaal AOP Bar Disposable Vape, a versatile vaping device perfect for MTL (Mouth-to-Lung) enthusiasts. Designed with convenience in mind, this sleek and compact device offers a satisfying vaping experience.
Equipped with a 1.4ohm mesh coil, the vaal aop bar 1000 puffs vape delivers excellent flavour and a smooth throat hit. With a generous 1000 puffs count, you can enjoy extended vaping sessions without the need for refills or recharge.
The device features a 20mg nicotine level, providing a balanced nicotine experience suitable for both new and experienced vapers. Its 2ml capacity ensures ample e-liquid storage, reducing the need for frequent refills.
Powered by a reliable 550mAh internal battery, the Vaal AOP Bar offers long-lasting performance for uninterrupted vaping enjoyment. The air-oil-parted technology and dual anti-leakage solution ensure a leak-free experience, keeping your vaping sessions mess-free.
With its vision transparent tank design, you can easily monitor your e-liquid levels, ensuring you never run out unexpectedly. The Vaal AOP Bar has a compact size of Φ16*100.5mm, making it convenient to carry and use on the go.
Hope you can carry this device with you without any burden, you can find more details through online vape stores uk.
More suggestion:
vaporesso target 100 kit review
xr max vape cheap
Equipped with a 1.4ohm mesh coil, the vaal aop bar 1000 puffs vape delivers excellent flavour and a smooth throat hit. With a generous 1000 puffs count, you can enjoy extended vaping sessions without the need for refills or recharge.
The device features a 20mg nicotine level, providing a balanced nicotine experience suitable for both new and experienced vapers. Its 2ml capacity ensures ample e-liquid storage, reducing the need for frequent refills.
Powered by a reliable 550mAh internal battery, the Vaal AOP Bar offers long-lasting performance for uninterrupted vaping enjoyment. The air-oil-parted technology and dual anti-leakage solution ensure a leak-free experience, keeping your vaping sessions mess-free.
With its vision transparent tank design, you can easily monitor your e-liquid levels, ensuring you never run out unexpectedly. The Vaal AOP Bar has a compact size of Φ16*100.5mm, making it convenient to carry and use on the go.
Hope you can carry this device with you without any burden, you can find more details through online vape stores uk.
More suggestion:
vaporesso target 100 kit review
xr max vape cheap