• Locked
The Vaporesso Xros 3 and Xros 3 Mini

With the advent of the 4th generation of pod kits onto the market, it was only a matter of time before Vaporesso decided to overhaul their star pod system, the XROS, with newer features to release it as this new wave of pod hit the market.

CHAPTERS

00:00 - Intro and specs
03:00 - Close Up
07:00 - Vape
08:00 - Thoughts

Rumble - Login to view embedded media
YouTube - Login to view embedded media
  • Like
Reactions: hittman

  • Locked
LOST VAPE THELEMA MINI 45W KIT review by hittman

Hello and welcome. I’m very glad to be here today with you to discuss the latest addition to the Lost Vape Thelema line of kits. So far we’ve seen the Thelema DNA250C, the Thelema Quest, the Thelema 80w, The Thelema DNA100C, and the Thelema Solo 100. Lost vape has done it again and this time I was sent the Thelema Mini Kit in order to provide you with a fair and honest review. The Mini has a maximum output of 45 watts while utilizing a 1500mah internal battery. The body is made of zinc alloy and it has a leather like backing on it. The tank included in the kit is the UB Lite Tank which promises a tight MTL to DTL performance. It has a liquid capacity of 3.5ml and the kit includes different two coils so you can sample both types of vaping I mentioned. Will it deliver on the promises? I sure hope so but stick around until the end of the review and I’ll tell you about my experience with each coil.

DyhSSMz.jpg


niqjKHc.jpg


WHAT’S IN THE BOX?

1pc Lost Vape Thelema Mini Device
1pc UB Lite Tank (3.5ml)
1pc UB Lite L7 Coil 0.3ohm
1pc UB Lite L8 Coil 1.2ohm
1pc Spare Glass Tube (2ml)
1pc Spare Parts Pack
1pc RDL Drip Tip
1pc MTL Drip Tip
1pc Type-C Cable
2pc User Manual
1pc Warranty Card

2PEr6Nj.jpg


SPECIFICATIONS:

Power Range: 5-45W

Capacity: 3.5ml (Standard Edition)

Coil Resistance Supported: 0.2-5.0ohm

Current Range: 1-15A

Display: 0.69 inch OLED Screen

Battery: Built-in 1500mAh battery

Battery Voltage: 3.0-4.2V

Body Material: Zinc Alloy & Stainless Steels

Charging: Type-C charging

Compatible Coil: UB Lite Coil

0.3ohm Mesh (45W, DTL, Freebase)

0.6ohm Mesh (20-30W, RDL or Loose MTL, lower NicSalt Freebase)

1.2ohm Mesh (11W, MTL or Nic Salt)

7x02doJ.jpg


FEATURES:

• Dimensions: 123.45mm by 32.8mm by 24.6mm
• Battery: Built-In 1500mAh
• Wattage Range: 5-45W
• Voltage Range: 3.0-4.2V
• Resistance Range: 0.2-5.0ohm
• Display Screen: 0.69" OLED
• Chassis Material: Zinc-Alloy + Stainless Steel
• Diameter: 22mm
• Widest Point: 22.8mm
• Glass Capacity: 3mL
• Fill System: Threaded Top Cap
• Tank Material: Stainless Steel
• Coil Series: UB Lite Coil Series
• Coil Installation: Press Fit
• Coil Resistances: 0.3-1.2ohm
• Tank Airflow: Dual Slotted Bottom AFC - MTL or DL

2zsfXTD.jpg


hLuci3J.jpg


Tcvqur7.jpg


INITIAL THOUGHTS:


I was a little surprised that the front of the box for the Mini was blue. Normally I would see a white box with black lettering. Anyway, it’s not bad, just different. The Lost Vape Quest and logo are near the top left. There is a picture of the actual device contained inside which I like instead of using one image for all versions. I received the Titanium Green version for this review. No complaints here. I like all of them besides the pink and purple versions. The back side of the box has a list of contents, company information, a warning, authenticity code, and a bar code with color version. My box says titanium green but that isn’t one of the colors listed but believe it is the same as the dragon green.

One side of the box has a list of features with icons while the opposite side has the Lost Vape Quest name and the logo “The Modern Demarcation”.

1670687390331.png


1670687417402.png


Once opened, the Thelema Mini is sitting in a plastic tray with the UB Lite Tank attached. To the right of the Mini is a spare bubble glass and a rectangular box with the USB-C charging cable, two UB Lite coils, and an accessory bag with an RDL drip tip and extra seals for the tank. The user manuals for the mod and tank are on top of the plastic tray when you first open the box.

The two coils included in the kit are a 1.2 ohm coil rated at 11 watts and a .3 ohm coil rated for 45 watts. There is also a third coil available but not included which is a .6 ohm coil rated for 20-30 watts.

1670688376590.gif


URMMjMX.jpg


1670688484971.png


The UB Lite tank included in the kit holds is easily broken down for cleaning. There are two different drip tips included. The MTL tip comes already installed on the tank and the DTL tip is inside the accessory bag. I really like the MTL tip on this one. It reminds me of some old school drip tips I used to use.

Once the top cap is removed, you can see that there are two holes. The larger one is for filling while the smaller one is the vent hole. Even though it might look big in the picture below, it really isn’t and some bottle tips will not fit through this hole. The coils simply push in to seat and the bottom cap screws on to make connection and hold it securely. The



UB LITE TANK FEATURES:

• Diameter: 22mm
• Widest Point: 22.8mm
• Glass Capacity: 2mL Straight
• Bubble Glass Capacity: 3.5mL
• Fill System: Threaded Top Fill Cap
• Tank Material: Stainless Steel
• Coil Series: UB Lite Coils
• Connection: Threaded 510
• Drip Tip: 510

1670688540698.png


Frq26Gv.jpg


jbHnpU1.jpg

RCkV9bv.jpg


The Thelema Mini is obviously a shrunk down version of the Thelema Solo. It sports a 1500mah internal battery with an output range of 5-45 watts. It has a .69” OLED display for a user interface. The main body of the Mini is made from zinc alloy with a leather like wrap that covers the back and sides. It has designs embossed on it but it really isn’t padded at all. The name Thelema Mini is printed on one side of the frame while the Lost Vape name is printed on the opposite side.

1670688773406.png


1670688798783.png


The top of the mod has the 510 connection plate secured by three torx screws. The threaded 510 connection has a gold plated spring loaded center pin like we’ve become accustomed to seeing on most mods these days. The included tank is 22mm in diameter and is a pretty good fit for the size of the top plate. You might be able to get a 23mm on there with no overhang but feel like a 24mm is going to go over the edge.

The bottom of the mod appears to be made of a hard plastic and is secured with two torx screws. There are three battery vent holes in the base which is a good safety feature.

1670688850144.png

The front of the mod has a fairly large square fire button that is quite comfortable to use. Below that is the .69” OLED display screen followed by the + and – buttons with the USB-C charging port on the bottom. The charging port allows the user to charge the 1500mah internal battery. I’ve looked a few places and do not see a charging rate listed anywhere for the Mini. If I can remember before I finish writing this review then I’ll dig out my USB charging tester and see what it shows. The .69” display shows the following information.

  • Battery level indicator
  • Coil resistance
  • Set wattage
  • Length of time of current puff(10 second cutoff)
  • Puff counter
The Thelema Mini is a pretty simplistic device. It only does wattage output. It is considered to be part of the Quest line of products but does not contain the Quest 2.0 display and buttons like we are used to seeing on larger Lost Vape mods. The few button operations available on this mod are as follows.

  • Press the fire button 5X to turn the device on/off
  • Press and hold the fire button and the – button for three seconds to reset the Puff Counter
  • Press and hold the fire button and the + button to Lock/Unlock the adjustment buttons while the mod will still fire.
1670688906990.png


FINAL THOUGHTS:


I have really enjoyed testing the Lost Vape Thelema Mini for this review. It is indeed a simplified and shrunken version of the Thelema. It is comfortable to hold with its smaller size but performs like a full size mod when using the .3 ohm UB Lite coil. The airflow control with three smaller round holes followed by a larger slotted hole allows the user to go from a tight MTL vape to a very nice RDL in my opinion. The 1500mah internal battery seemed to last quite a while and especially when using the 1.2 ohm coil in MTL operation. There is also a pod tank available for purchase for those that like to use pods. I personally don’t see the point but Lost Vape decided to include it in the information on the Mini kit. I guess it would save one step in coil changing but you would then sacrifice the top fill of the UB Lite tank for a bottom fill pod. Not a move that I would make.

As far as my testing goes, I started out with the 1.2 ohm coil set at the recommended 11 watts and filled the tank with a fruit salt nic that I had left over from another review. I ended up running the airflow with one single round hole open using the MTL tip included in the kit and pre-installed. The flavor production was really pretty good but I yearned for more wattage. After running the coil at 11 watts to break it in then I bumped it up to 13 watts. This was a better fit for me. I don’t really do much low wattage MTL vaping but was pretty happy with this one at these settings.

Next up I cleaned the tank out and wanted to change to the bubble glass but after several tries and not being able to get the straight glass off I finally gave up and just switched to the .3 ohm coil and filled the tank with some Dinner Lady Lemon Tart. I have to admit that I was really surprised by this coil. I know it’s rated for 45 watts but I started out at 25 watts just to be safe. Even at that setting it was a really nice and powerful vape. I did work my way up to 45 watts but at that setting for me it was too warm and after a few consecutive puffs it didn’t seem like the coil was fully saturated. I ended up dialing it back to 28 watts and was very happy with this setting. Great flavor and a respectable amount of vapor. I’ve noticed on many stock coils that even though there is a recommended wattage setting that many times it’s just not a good fit for me.

I’d like to thank Lost Vape and Bella for sending the Lost Vape Thelema Mini 45W kit for this review. Also, thanks to you the readers for making it to the end of another review. Below is a link to the Lost Vape website for your viewing pleasure.

Thelema Mini 45W Kit - Lost Vape
Gqo63DR.jpg


  • Locked
SXK SVA KIMAIO DNA60W AIO Mod Clone

sxk-SVA-KIM-AIO-MOD.jpg


The SXK SVA KIMAIO Style 60W AIO All In One Box Mod is made from Carbon Fiber + POM and supports 1W to 60W output. The AIO Box Mod is powered by 1 x 18650 battery (not included) and built-in Evolv DNA 60 Chip. The SVA Kimaio Box Mod is compatible with regular BB / Billet drip tip and BB / Billet RBA Bridge deck / Boro Tank.
More info SVA KIMAIO Aio Mod clone By SXK
Materials: Carbon Fiber + POM
Authentic Evolv DNA60 Chipset
Wattage: VW 1~60W
Powered by 1 x 18650 battery (battery not included)
Compatible with BB / Billet RBA Bridge deck / Boro Tank (RBA / Boro tank not included)
Adjustable stainless steel flush nut for 510 drip tip included (drip tip not included)
With USB power for charging.

QUICK LINK,Click Here>>Buy SXK SVA KIMAIO Style 60W AIO All In One Box Mod Black Evolv DNA 60 Chip
  • Like
Reactions: DPLongo22

  • Locked
BUY NOW! VOOPOO ARGUS P1 Pod Kit

argus-P1.jpgBUY NOW! VOOPOO ARGUS P1 Pod Kit

Features:

  • 800mAh Built-in Battery
  • 5-20W Output
  • 2ml Vape Juice Capacity
  • VOOPOO ARGUS POD Cartridge 0.7Ω
  • VOOPOO ARGUS POD Cartridge 1.2Ω
  • Zinc Alloy&PC Construction
  • PD Fast Charging
  • Futuristic Mechanical Style
  • AI Output Adjustment
  • ITO Atomization Technology
  • Patent Leakage-Proof Design
  • Airflow Adjustment
SPECIFICATION:
  • Size: 74.6*46.7*17.4mm
  • Output Power: 5-20W
  • Capacity: 2ml
  • Resistance Range: 0.5-3.0Ω
  • Output Voltage: 3.2-4.2V
  • Battery: 800mAh Built-in Battery
  • Material: Zinc Alloy+PC
  • Compatible Cartridges: ARGUS POD Cartridge 0.7Ω/1.2Ω
SUPER CHRISTMAS SALE IS LIVE NOW!!!!!!!!!!!
USE COUPON CODE (CS15) TO GRAB 15% DISCOUNT STOREWIDE TILL 25th DEC, 2022
merry-christmas-banner-ecigmafia-1-.jpg

  • Locked
The BPMods LABS MTL RTA

BPMods decided to team up with a number of EU based designers (and reviewers i think) to come up with a different sort of MTL RTA. There is innovation in this one, but not where you would generally expect the innovation to be...

CHAPTERS

00:00 - Intro and specs
03:00 - Close Up
23:00 - Vape
26:00 - Thoughts

Rumble - Login to view embedded media
YouTube - Login to view embedded media

  • Locked
Voopoo U-Force-L Tank Review By Frenkyou

  • Locked
Voopoo U-Force-L Tank Review By Frenkyou

Voopoo-U-Force-L-Tank-1.jpg


Hi, after the review of Drag 4 Kit I would like to deepen with you the knowledge of U-Force-L Tank illustrating with more detailed images some details that may have been missed.
• Thank you.

► Voopoo U-Force-L Tank; Highlights indicated by the manufacturer:

• 1. Triple air intake to balance the flow and make the flavor tasty
• 2. Top-down airways to isolate condensate and prevent leaks
• 3. 360° airflow adjustment to customize your favorite flavor
• 4. Innovative 510 base with heat sink
• 5. 4ml/5.5ml capacity, easy top fill system
• 6. Compatible with VOOPOO Drag 4 Kit/Mod and all PnP coils
• 7. PnP dual in one technology for powerful cloud and richer flavor

Voopoo-U-Force-L-Tank-2.jpg


► Voopoo U-Force-L Tank can be purchased separately from the Drag 4 Kit; Packing List:
Depending on the area where this item will be purchased, there may be some different characteristics due to the TPD law.
• 1* VOOPOO UFORCE-L Tank (4ml)
• 1* VOOPOO PnP-TW20 0.2Ω
• 1* VOOPOO PnP-TW15 0.15Ω
• 1* Spare glass container (5.5ml)
• 1* Pack of Spare O'rings
• 1 * User Manual

Voopoo-U-Force-L-Tank-3.gif


Voopoo-U-Force-L-Tank-4.jpg


► Voopoo U-Force-L Tank; Specifications:
The Gif image below shows the tank in domed glass and straight glass (TPD) configuration. The TPD version appears to be 5mm lower.
The diameter at the base is 25.5mm and the height (Standard Version) is 58mm. The construction material used is Stainless Steel + Pyrex. The weight of this robust tank is 90g.

Voopoo-U-Force-L-Tank-5.gif


► Voopoo U-Force-L Tank; Available colours:
At this moment the tank is distributed in 3 different and basic colors.

Voopoo-U-Force-L-Tank-6.gif


► Voopoo U-Force-L Tank; Exploded view:
Now let's see in detail what is the first VooPoo Sub-ohm Tank equipped with "Top AFC", because it is a particular construction type which, compared to the classic "Bottom AFC" arrangement, is able to eliminate any loss of e-liquid.

Voopoo-U-Force-L-Tank-7.jpg


This tank can be easily disassembled for cleaning operations and the package is particularly rich in spare silicone gaskets and o-rings.

Voopoo-U-Force-L-Tank-8.jpg


► Voopoo U-Force-L Tank; Drip Tip 810:
VooPoo (cleverly) made the 810 housing featured in the top cap "standard", this solution allows you to use any 810 Drip Tip equipped with one or two silicone rings. The original Drip Tip has two white silicone rings that offer an excellent grip, the extraction hole at the base is 7mm wide then the chimney widens upwards progressively to end with a 10mm diameter at the top.

Voopoo-U-Force-L-Tank-9.jpg


► Voopoo U-Force-L Tank; Facilitated refill:
The top cap has a finely knurled perimeter for better finger grip. In fact, with the classic bayonet system, 1/2 a turn is enough to remove the cap and proceed with filling. There are two filling slots with elastic holes to allow the insertion of even fairly wide tips of the respective e-liquid dispensers.

Voopoo-U-Force-L-Tank-10.jpg


In the image below you can see the large silicone gasket removed from its housing, you can see the shape of the gasket and the protuberance that goes into the single blind hole around the filling slots. You can also see the "bayonet" system for opening the top cap.

Voopoo-U-Force-L-Tank-11.jpg


► Voopoo U-Force-L Tank; Triple upper vent:
You can rotate the AFC ring on the top of the atomizer clockwise or counterclockwise to adjust the airflow as you like. The three large vents are connected like a funnel to channel and compress the air from top to bottom. In the lower part of the central structure, the three air intakes wrap around the coil at 360°, feeding it in a large and uniform way. Furthermore, the hollow structure in the central part absorbs the noise of the airflow to allow you to enjoy the vape silently and without annoying whistling.

Voopoo-U-Force-L-Tank-12.jpg


Voopoo-U-Force-L-Tank-13.jpg


► Voopoo U-Force-L Tank; Central structure of the Tank:
Above the oring for the pyrex glass seal, there are 3 large windows for the passage of the e-liquid towards the coil, these windows are carefully flared on the edges.

Voopoo-U-Force-L-Tank-14.jpg


In this image I tried to show you the 3-headed dog logo (maybe 3-headed wolf) that VooPoo laser engraved in the center of the supporting structure.

Voopoo-U-Force-L-Tank-15.jpg


► Voopoo U-Force-L Tank; Base with Heatsink:
On the bottom of the base are; the inscription "VOOPOO", the inscription "Designed By VOOPOO", the CE mark, the disposal logo. The Thread contains a gold-plated, slightly protruding fixed pin.

Voopoo-U-Force-L-Tank-16.jpg


In this image, you can see the base design that mimics a heat sink to speed up the cooling of the tank. The base joins the central structure via a sliding thread, between the base and the central structure there is a silicone o-ring for a perfect seal.

Voopoo-U-Force-L-Tank-17.jpg


The base is quite deep to contain the possible formation of condensation without a way out. In the center are the gold plated contact pins for better electrical conductivity to be transferred to the coil. You can see that there is another o-ring on the upper perimeter of the base for a perfect seal with the tank.

Voopoo-U-Force-L-Tank-18.jpg


► Voopoo U-Force-L Tank; PnP TW Series Coils:
In the image below you can read the details of the new PnP coils of the TW Dual In One Tech series. These coils have been specifically designed for this tank and to offer the best RDL/DL performance.

Voopoo-U-Force-L-Tank-19.jpg


► Voopoo U-Force-L Tank; Final Conclusions:
Having already talked about the excellent performance of U-Force-L Tank and its coils, I won't be repetitive, you can read my impressions in the previous Review Drag 4 Kit.

If you are looking for a Sub-Ohm tank with great RDL/ DL and you want to hunt big tasty clouds... Buy U-Force-L without worries, because it is easy to use and is compatible with all PnP coils, including the RBA regenerable base.

• The Voopoo U-Force-L Tank Can be purchased separately here:

Voopoo-U-Force-L-Tank-20.gif

  • Locked
Newly Launched: Rincoe Manto AIO Plus Pod Kit

The new manto aio plus kit from Rincoe is very surprising. Among the vape products, the appearance colour and style of this manto aio plus kit are very unique. The retro colour and fresh stick figures let us see the beauty of the vape products and lead the vape products to a new trend.

The design of this pod kit shell is very user-friendly, not only has a unique square button for your control, but also an LED display that allows you to intuitively see the power and status of the device. The 18650 battery provides a sufficient power guarantee for its operation. Its maximum output power is 80 watts. When the battery runs out, you just need to connect the type-c plug to charge it. It charges 50% faster, so you won't have to wait long for a full day of vaping.
rincoe-manto-aio-plus-kit_(3).jpg


To make your vape experience more enjoyable, you have a variety of ways to play. We recommend that you use rincoe pods with a capacity of 3ml, which are the best compatibility. If you like a more intense flavour, you can choose a 0.15ohm coil to experience the dense smoke of DL atomization. If you like a smooth and tangy flavour, then you can choose a 0.3ohm coil. The mesh coil combined with the airflow system is sure to immerse you in the vape experience. You can also use it to try vaping in MTL and RBA modes.

More new products are available in our vape online uk, you are welcome to choose.

You might also like:
best r and m tornado 9000
cheap vandy vape pulse aio mini kit

  • Locked
Coming Soon: Rincoe Jellybox Nano 2 Kit 26W

Rincoe Jellybox Nano 2, with a more prominent design embodies both inside and outside but maintains the inner strength. Upgraded version of Jellybox chip, 26W strong output, multiple lighting effects, give you the ultimate performance.
rincoe-jellybox-nano-2-kit_(3).jpg

Parameters
Brand: Rincoe
Unit: 1 Set
Size: 53*19*71.9mm
Capacity: 2.8ml
Resistance: 1.0ohm
Battery: 900mah
Output Power: 1-26W

It is also designed with a variety of light effects and 5 RGB light modes to bring you different visual experiences. It is compatible with Jellybox Nano Pod Cartridge and Jellybox Nano Coil 0.5Ω/1.0Ω. It also has a 2.8ml e-juice capacity and a simple refill system.
rincoe-jellybox-nano-2-kit_(6).jpg

The Rincoe Jellybox Nano 2 Kit is small but packed with flavor. It is powered by a built-in 900mAh battery with a maximum power of 26W and supports Type-C charging. It has automatic output adjustment and airflow adjustment functions to bring you a better user experience.

Just click here to have a preview: Rincoe Jellybox Nano 2 Pod Kit 900mAh 26W

Other kits we recommend you:
Rincoe Manto AIO Plus Pod Kit 80W 3ml
Rincoe Jellybox XS Pod Kit 1000mAh 30W

  • Locked
PRE-ORDER: Eleaf IORE LITE 2 Pod Kit $6.99

Just simply plug and play, you will enjoy an instant enhanced flavor with Eleaf IORE LITE 2. The 30g weight makes it super light in hand and to be transported everywhere by sliding it into even the smallest pocket. IORE LITE 2 refillable&replaceable pod can last up to 10 times of refill, more economical than disposable pods. The side refilling makes refill of the pod a breeze. You can freely fill the pod with your favorite flavors! Although small in size, Eleaf IORE LITE 2 comes with a bigger 490mAh battery to power up your whole day vaping. You're going to love it.

More Details Of Eleaf IORE LITE 2:
Size: 25mm x 14mm x 103mm
Battery Capacity: 490mAh
Pod Capacity: 2ml
Coil: 1.0Ω (Mesh)
Product Weight: 30g
Output Wattage: 12W Max
Charging: USB-C
Super Light and Portable
Five Bright Colors
Pure and Consistent Flavor
Economical Refillable Pod & Refilling in a Breeze
Enjoy the Simplicity: Plug-and-Play
Bigger Battery for Vaping Longer

eleaf-iore-lite-2-kit_(1).jpg


Recommended products:
menthol vape juice Illinois
0mg vape juice cost

  • Locked
SMOK PROPOD ,Perfect for MTL lovers!

The expressive styling of the PROPOD takes your breath away. Available in seven exquisite colors, the debut is poised to put the style of elegance to the fullest. Its long-lasting 800mAh battery delivers up to 22 watts of power, combined with a 2ml novo 2X 0.8Ω MTL pod, producing delicate flavor and smooth vapor, perfect for MTL lovers. The all-new PROPOD, a daily companion that reflects your personality with a luxurious touch. Innovation keeps changing the vaping experience!
PROPOD KIT--ins图.jpg
  • Informative
Reactions: MLEJ

  • Locked
R and M Squid Box Disposable Best Rechargeable Device

You should know that r and m squid box is a very easy-to-use disposable cigarette with a built-in 850mAh battery, which is a rechargeable device that can be quickly recharged through the Type-C port on the bottom when your battery runs out. The Pod part is pre-filled with 12ml of pre-filled e-liquid for you, containing 20mg of nicotine concentration, providing a maximum of 5200 puffs of inhalation, which can basically satisfy your desire to vape for more than ten days.

The RGB light on the bottom will flash with each inhalation, so you can check in time when your battery is depleted. A 1.2ohm mesh coil is pre-installed inside for you, which can not only ensure the stable heat output of the r and m squid box disposable but also provide MTL vaping, bringing you comfortable and soft clouds.
r-and-m-squid-box-disposable_(1).jpg


In terms of taste, it combines the taste of mixed fruit, ice and mint. I believe there is always one that suits you. In order to prevent the loss, a small lanyard is also prepared for you, which is convenient for you to hold in your hand. You can easily obtain such a stylish and special device at best vapes 2022, or more large-volume disposable cigarettes can also give you a different surprise.

Features
• 850mAh Integrated Battery
• 5200 Puffs
• Mech Coil
• 12ml Capacity
• Pre-filled, Pre-charged
• Draw-activated

You may also be interested in:
vandy vape pulse aio mini
voopoo drag 4

  • Locked
Has anyone placed an order from dxvape?

They have some drip tips and a few other things I wanted to order from fasttech. The price of the drip tips is less than half of what I paid through fasttech and the shipping is extremely cheap via AliExpress. PayPal is not a payment option despite the site stating that it is. I've just laced the order, but I'd like to hear others' experiences placing an order on their site.
  • Like
Reactions: Fidola13

  • Locked
New product! SMOK Prisma Pod System Kit 800mAh 2ml

Smok Prisma Kit features an 800mAh internal battery with max 22W output and Type-C charging to bring you long-lasting use, compatible with Novo/Novo 2/Novo 2X pod cartridge that accommodates 2ml of e-juice. The adopts sandblasting oxidation and silicone gel textures for the comfortable grip.

Prisma-Pod-Kit-11.jpg


Features:
1. Built-in 800mAh battery with 22W max
2. Draw activated or button triggered for your option
3. Multiple-color indicator to show battery status
4. Equipped with Novo 2X Meshed 0.8ohm Pod
5. Fit for Novo & Novo 2 (side fill) / Novo 2X Pod (top fill)
6. 2ml e-juice capacity, leak-proof design
7.Sandblasting oxidation and silicone gel textures
...

Click here for more:

Smok Prisma Kit: SMOK Prisma Pod System Kit

  • Locked
New Arrival!!!! | Horizon Binaries 6K Disposable Device (6000 Puffs)

horizon-binaries 6k.jpg

BUY NOW! Horizon Binaries 6K Disposable Device (6000 Puffs)

Parameters:

  • Puff Counts: 6000Puff
  • Capacity: 15ml
  • Body Materials: PC/2456, PC+ABS
  • Nicotine Strength: 5% (50mg)
  • Atomizing Core: 1.0ohm
  • Battery Capacity: 650mAh
SUPER CHRISTMAS SALE IS LIVE NOW!!!!!!!!!!!
USE COUPON CODE (CS15) TO GRAB 15% DISCOUNT STOREWIDE TILL 25th DEC, 2022
merry-christmas-banner-ecigmafia-1-.jpg

  • Locked
KTS Liquid Chroma Strawberry Macaron

Manufacturer.
Packaging: 20ml aroma in 60ml flask
The manufacturer promises a strawberry cream macaron cake poured into this longfill mould. I was hooked immediately, I wouldn't miss this strawberry dessert. It was disappointing right from the start as it doesn't have much of a scent, what I got was a very faint cookie something. It's ok, I didn't buy it for the smell, let's look at the taste. Unfortunately, I didn't get what I would have expected in terms of taste either. The strawberry is almost impossible to identify, it's some kind of fruit, but it's not strawberry for sure. The cakey part, which would be the macaron in theory, overpowers the fruit part of the flavour, but only because you can at least taste some of it. I got a rather sweet sugary taste that is so present that you can almost taste nothing else. I was wondering while steaming what could have happened, how the producers could have ruined this flavour like that. If it has fruit and cookie flavours, I could at least tell one of them for what it is. I expected more from the Croatian producer KTS, who has so many flavours that I can almost only write good things about. I found this aroma to be very weak and pointless on my part, which is a shame as I could have gotten much better flavors out of the intestinal oils I did get. But that's okay, there are worse flavours than bad ones, and the good news is that I have tasted worse flavours. Since there are seven flavours available in the Liquid Chroma range, I hope the other fruity flavours don't go down the same bad road as the Srawberry Macaron.

Attachments

  • mockup-kts-chroma-liquid-pink-60ml-1581x1580.jpg
    mockup-kts-chroma-liquid-pink-60ml-1581x1580.jpg
    305 KB · Views: 9

Filter