Hi, Today let's take a look at Wotofo Profile X RTA. In this Test I will examine each of the characteristics that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Before starting, let's see the main characteristics declared by the manufacturer:
• 1. Creates a large amount of vapor and provides a rich and smooth flavor.
• 2. It is the only top airflow RTA in the market that fits all Profile meshes and is compatible with both single and dual strand coils simultaneously
• 3. A whopping 8ml capacity when used with bubble glass.
• 4. Quarter-turn top fill system with dual low fill ports for more comfortable filling.



► Packaging:
The package with black / green colors and white writing has a window on the front to see the internal content, you can also read the product name (Profile X), the website and the manufacturer by Wotofo. On the back side of the box are listed; The warnings, the place of origin of the product, the legal logos and trademarks. On the other sides of the packaging are; the packing list, a barcode, color indication (Black), the check security code and other identifying writings.





► Packing List:
• 1 X Profile RTA
• 1 nexMESH Chill A1 0.15Ω
• 1 nexMESH Turbo A1 0.13Ω
• 1 nexMESH Extreme A1 0.16Ω
• 2 Framed Stapled Clapton Ni80 0.33Ω
• 3 Cotton strips 6mm thick
• 2 strips of cotton 3mm thick
• 1 Bubble Glass 8ml
• 1 Mesh bending tool
• 1 Phillips screwdriver
• 1 bag of accessories
• 1 User Manual



► Specifications:
• Dimensions: Φ28*43.7mm (with drip tip and 510 pin)
• Drip Tip Material: 810 colored resin
• E-liquid capacity: 5ml Standard Edition PCTG tube, 2ml TPD edition, 8ml bubble glass (included in the package)
• Deck diameter: Φ28mm
• Type of coils supported: Single Mesh, Single Wire, Dual Wire
• Type of airflow: Top adjustable
• Pin insulation material: German PEEK
• Deck insulating material: Ceramic
• Thread: 510



► Available Colors:
• Black
• SS
• Gunmetal
• Gold
• Blue
• Rainbows



► First Impressions:
The Profile X RTA is the result of meticulous engineering and continuous manufacturing improvement to increase the performance of the original Profile RTA.
The deck of the new Profile X RTA can accommodate different configurations of Coils; Single mesh, dual and single wire coils. With the supplied bubble glass, the maximum capacity is increased up to 8ml. Wotofo has always built its devices in a qualitative way to satisfy its customers. The upper structure in stainless steel gives the Profile X RTA the necessary structural solidity. The Profile X RTA comes in multiple color options such as; steel, black, gunmetal and rainbow. When choosing a Tank RTA it is important to first evaluate its characteristics in order to choose the correct Mod to match it. For this test I used MDURA 230W which is a powerful and captivating dual battery-Mod from Wotofo.



For this test I received from Wotofo a nice example of Profile X RTA in the Black color version, the paint has nice glossy reflections. The top cap has a perimeter in the shape of a "bolt head" but you don't need a wrench to unscrew it, rather it is rather a 1/4 turn counterclockwise to access the two huge filling slots. The 810 drip tip is set in a slightly raised collar and its red color with black streaks goes well with the color of the tank. It is a Top AFC with rather small height dimensions, and in width the bubble glass is imposing but does not disfigure the design at all. There are some white writings that stand out well against the black background, at the top you can read "Profile X Wotofo" in small but sharp font, and in the middle (through the glass) you can see the Wotofo logo.



► Honeycomb AFC:
At the top, there are two rows of 18 holes for each side (total 36 holes), and this kind of top airflow structure prevents e-liquid from leaking. Counterclockwise rotation of the control ring progressively closes the flow and clockwise rotation opens the flow.



The exploded view of Profile X RTA highlights some details, look at the slots for filling as they are positioned below! This solution is very clever because it allows you to drop the liquid inside the tank with any bottle, you could even fill it with a glass, and without wasting even a drop of liquid. As I anticipated, the top cap unscrews/screws easily with a 1/4 turn rotation, this is the classic "bayonet" system. The air control ring has rotation stops and is quite fluid and precise to operate, and can also be disassembled for periodic cleaning operations. The upside-down deck shows a threaded connection with a rather protruding but fixed pin, around which there are numerous intification writings. The one-piece central structure has the internal shape of a hemispherical dome which is flanked by two large slots for the inflow and air extraction. The inside of the bell is threaded to join solidly to the deck.





► Builds:
The Profile X deck has a configuration for Single Mesh, the Phillips screws and a pair of clamps fix the mesh correctly in the designated point, it is also possible to insert one or two traditional type coil of wires. In the kit there are 3 different types of mesh and two traditional wire coils, I tried them all and also in single wire coil configuration, so I will describe my impressions. Before starting the construction it is necessary to take the tool supplied for bending the mesh coils. After preparing and bending the mesh coil, you need to proceed carefully so as not to deform it, then you need to insert it into the deck and tighten the clamps. The white ceramic plate is spring loaded and when you insert the cotton laces (present in the package) you need to press the ceramic plate down and insert the cotton lace at the same time. The pushing action of the spring lifts the plate and pushes the cotton to fit snugly against the mesh. The liquid draft buttonholes are huge, however it is necessary to reduce the size of the cotton whiskers to be able to insert them comfortably in the buttonholes, the lower part of the cotton whiskers I cut them diagonally leaving the upper part intact and in close contact with the outer edges of the network. Unfortunately, describing this procedure is complicated, and if you are inexperienced, a video of the operation would solve many doubts. Youtube is full of useful videos of how to proceed to correctly position the cotton inside a mesh coil.





► Vaping Test:

• nexMESH Extreme A1 0.16Ω:
After some tests I preferred to use this coil at 52W of power, I noticed that with higher powers the absorption of the liquid struggled to keep up with the needs of the cotton and the coil. With the vents closed at 50% I found my sweet spot experiencing good flavor and quite interesting vapor production.



• nexMESH Turbo A1 0.13Ω:
The low resistive value of this coil would need a very high selected power, however I had to "settle" for 60W because once again, raising the power too much, the correct feeding of the cotton was in crisis. However with this power (60W) the activation is instantaneous with a very fluid delivery of the steam and with a slightly better flavor than the previous one. Clouds are consistent and again I selected 50% AFC aperture to get just the right amount of warmth.



• nexMESH Chill A1 0.15Ω:
Unlike the previous coils (in steel) this one is in Kanthal A1, and is reactive in ignition even with relatively low selected powers. Initially I received some dry-hits because I had left the "shoulders" of the cotton too low (as in the photo), after having raised the shoulders of the cotton putting them in close contact with the mains I was able to select 50W of power. So after solving my mistake I was very happy. The clouds are thick and creamy, and the flavor is perhaps the best compared to the previous nexMESH's in steel.



• Single Clapton Coils:
I initially tested a 3.5mm inner diameter coil, but due to the large chamber size, the flavor was rarefied and below average. Then I rewound the resistor onto a large 5mm diameter tip. Things immediately started to work out much better. With 40W of power and with this configuration the Profile X has nothing to envy to other tanks that are designed for exclusive use with single wire coil .



• Dual Framed Stapled Clapton Ni80 0.33Ω:
The final resistive value settled at 0.12Ω. I used these double coils with a power between 65 and 75W. As I expected this is a hotter type of vape, and it stays hot even with the AFC wide open. The amount of clouds and quality of flavor are less impressive than setups with Mesh coils. However in this case the performances do not fear comparison with other RTA tanks born and developed for the classic use with coiled wire coils.



► Final Conclusions:
Undoubtedly Profile X RTA is a well-built tank, decidedly cute and with a large liquid capacity, especially if it is combined with the supplied bubble glass. The top air adjustment with rotating ring is simple and effective, moreover the Top AFC forgives any cotton positioning error avoiding losses. There are several possibilities to regenerate the Profile X RTA; it also works well with traditional coils, but this is a specific tank for Mesh Coil and it is with these configurations that Wotofo's new product offers the best performance, just what you were looking for.

I would like to thank Wotofo for providing me with the Tank. Hope this review was helpful for anyone who wants to buy Wotofo Profile X RTA.

Thanks for reading.

The kingston zero disposable is a disposable kit that provides 3500puffs. The pod is pre-filled with 10ml of e-liquid for you. The e-liquid cannot be refilled. There is a built-in 1500mAh battery, which can basically maintain the battery life of your electronic cigarette for a day. If your battery capacity is exhausted, you can also solve it by charging it.

If you are a fan of nicotine free vape, then this e-liquid with 0mg nicotine concentration will be very suitable for you. In addition to concentration, another user is most concerned about the taste of disposable cigarettes. I think that if a taste can be deeply rooted in the hearts of the people, it will be a great plus for the brand and will attract more loyal users.

Provides you with 20 flavours, combining the taste of fruit, ice, drink and menthol. Kingston Zero cheap disposable vape is an inhalation-activated device. Apart from the need to charge your hands, there are basically no other issues that will bother you.


Features
• 0mg Nicotine Strength
• 20 Kinds Of Flavors
• Rechargeable Battery
• 1500mAh Built-in Battery
• Pre-filled 10ml E-liquid
• 3500 Puffs
• Inhale-active

The vape black friday deals event was officially launched during 11/21-11/30. There are various e-cigarette promotions once a year. If you miss it, there will be nothing. I believe you will gain something.

And this newly launched pod mod kit also deserves your attention https://vapesourcing.uk/lost-vape-thelema-mini-kit.html.

You may also in fond of :
caliburn a2s review

This thread is for the general discussion of the product New Aegis Design : Red White Version Official Introduction. Please add to the discussion here.

I live in Edmonton, Canada. I touched down to vaping March 2018 after buying a Smok G-Priv with a tank. Back then there was still a lot of sugar in the vapes so I burned out coils after a few puffs. I decided to try out an RDA, not actually understanding what "dripper" means for FOUR YEARS!!! I ended up with a couple Apocalypse RDA clones off of Fasttech. I though they must be the "best", but they were very loose and leaky. For FOUR YEARS I put up with leaks, kleenex, wet rags and towels. I thought that a loose cap and removing it each time was the optimal method of refreshing the cotton and coils with a unicorn bottle. I had figured out how to do DIY juice making, although I'm kind of lame and prefer shake and vape. I got sick of the mess from the Apocalypse all over my desk... but it took FOUR YEARS! A drop of e-juice even destroyed one of my favorite computer mice making it unable to scroll. The stupid Apocalypse would often spit out fire and leave me with burns on my lips like cold sores. Two or three years back I had bought an original "Drop" RDA, but dismissed it because it was "too tight". Finally I started getting mad, and bought some 510 curved tips to avoid burns. FINALLY I got some sense into me and loaded up the Hellvape? Digiflavor Drop RDA, and the leaks and mess were gone. I only had to use the unicorn bottle to drip into the 810. It took me FOUR YEARS thinking that a leaky Apocalypse clone was the real deal. I may be one if the THE most stupid vaper in all history. I just wanted to share this short story of how stupid I have been. After using the Drop RDA I have had NO mess, and everything pretty much works great. I ended up ordering a Recurve V2 and a SRPNT yesterday to try them out. I can't believe how stupid I was to constantly mop up juice all over the place - and spitting all over the place from the Apocalypse. FINALLY I learned that you're just supposed to drip the damn juice through the drip tip. I guess I was temporarily misled because I was adding sweetener to my DIY mixes - needing frequent cotton changes. But e-juice is really sweet enough as it is! I'm posting because I just needed to get this off my chest! Four years of STUPIDITY and one unused Drop RDA fixed everything! I can't believe it!

RTA or RBA？Hazard RTA by Across Vape

The design concept of the HAZARD RTA is derived from Bio Hazard gas masks with the bridge design looking similar to side filters . The tank is not only compatible with our bridge, but it’s also compatible with most BB bridges on market.

Login to view embedded media

I’m back once again with another review for you. I was sent the Eleaf iStick i80 mod kit by JWEI in order to provide you with another fair and honest review. The i80 is the big brother of the iStick i40 that I reviewed a short time ago. This one has a maximum output of 80 watts and has an internal battery rated at 3000mah and is charged via the 5V/2A USB-C charging port. Included in the kit is the Melo C tank which has a liquid capacity of 5ml and uses the EC2 series coils. The two included in the kit come in at .3 and .5 ohm resistance. Maybe it’s just me but for some reason I just don’t see many .5 ohm coils any more. I think that resistance used to be more popular. The Melo C uses a slide to fill system. I tend to like these since I don’t have to find a place to sit the top cap down while filling the tank.





WHAT’S IN THE BOX?

1* Eleaf iStick i80 Mod
1* Eleaf MELO C Tank
1* Eleaf EC2 0.5Ω Coil
1* Eleaf EC2-M 0.3Ω Coil (Installed in the tank)
1* USB Type-C Cable
2* User Manuals
1* Warranty Card

SPECIFICATIONS:

Product Size: 36*29*134.5mm

Battery Capacity: Built-in 3000mAh battery

Output Wattage: 1-80W

Charging Current: 5V/2A (USB-C)

E-juice Capacity: 5ml (Standard)

Filling: Top filling

Fit For: Eleaf EC2-M 0.3Ω Coil and EC2 0.3Ω/0.5Ω Coil

Color: Black, Green, Brown, Blue, Red

FEATURES:

1. Composed of iStick i80 Mod and MELO C Tank

2. Built-in 3000mAh battery with 80W max output

3. 5ml e-juice capacity, easy slide-and-fill system

4. Fit for EC2-M 0.3Ω and EC2 0.3Ω/0.5Ω Coil

5. Equipped with smart chip inside for better use

6. Compact and ergonomic, comfortable to hold

INITIAL THOUGHTS:

If you’ve seen my last two reviews then you’ll recognize the packaging on the iStick i80. When I first received the package with all these different samples, I thought I had received several of the same one but then noticed the different sizes of the boxes and took a closer look to discover that the FlasQ, i40, and i80 were in fact different devices. The packaging once again is the black box with the large green symbol and a small picture of the device on the front. Once again one side shows the contents list, specifications, and company information while the other side has the authenticity code and some icons highlighting a few features. The included tank uses the EC2 series coils instead of the GTL coils seen in my last review. As far as I know there aren’t any black coils for this one.

Much like the i40, the i80 sits in a foam insert with the Melo C tank above it. You might notice the little pull strap at the top above the tank. That’s to make it easier to lift the insert so you can get to the rest of the contents that are underneath which include a .3 ohm GTL coil rated for 30-50 watts and the .5 ohm coil rated for 30-100 watts. I find it strange that the .5 coil has such a large wattage range. I never go anywhere near 100 watts in my normal usage. Also under the insert there are two user manuals, a warranty card, and a USB-C charging cable.

The i80 has a 3000mah internal battery with a charging rating of 5V/2A. Theoretically you should be able to fully recharge in about an hour and a half if you have a wall wart that will deliver 2 amps of power.

As you can see below, the vinyl like material on the i80 wraps around the entire body continuously only exposing the metal edges of the mod around the exterior of the mod. There are no names or branding at all on the colored portion of the mod.

The bottom of the mod does have the iStick i80 name on it along with a single battery venting hole. The top of the mod seems to have the same 510 connection plate as the i40 with the four grooves cut in the plate as well as the same shaped gold plated spring loaded center pin. The top also has the Eleaf name which is the only other branding besides the bottom.

The front of the i80 has a large square fire button near the top followed by the OLED display, + and – buttons, and finally the USB-C 2A charging port on the bottom used to charge the 3000mah internal battery. In theory, if you have a charger that will supply a consistent 2A of power then you should be able to charge the battery entirely in about an hour and a half. The OLED display is a simple display much like the i40 had. It only shows the Set Wattage, Battery level indicator, Coil resistance, Output Voltage, and Amperage while firing. The i80 does have what I would call a modified Smart mode. It will sense the resistance and change to a recommended setting. You can change the setting and once you have fired the mod twice then it will remember that setting. The button operation for the i80 is as follows.

• Press the fire button 5X to turn the mod on/off
• Press the fire button and the + button to enter the Set menu where you can choose from Exit, Sub parameters, Stealth, Preheat, Version, Battery, Coil, and TCR
• Press the + and – buttons to lock the wattage adjustment buttons but the mod will still fire
• Press the fire button 3X to enter the menu where you can choose from VW, Bypass, TC-Ni, TC-Ti, TC-SS316, TCR-M1,2, or 3

To me the Set menu gets a little confusing because it uses symbols instead of words and the display isn’t that big so for my old eyes it’s hard to tell what you are selecting. I’m sure if you used the mod long term then you would get used to it. The i80 does have some built in protections and has a 10 second cutoff. I personally couldn’t imagine taking a 10 second puff but maybe someone could.

The tank included in the i80 kit is the Melo C tank. This tank uses the EC2 series coils and as I mentioned earlier it comes with one each of a .5 and .3 ohm coil. The EC2 coils thread into the base and thread into the chamber. This is something I haven’t seen in a long time. Most coils I see these days are simple push in coils. Nothing wrong with threaded coils it’s just odd to see them these days. It will hold 5ml of liquid with the standard kit or 2ml with the TPD version. As always, disassemble and clean your tank before using it. The Melo C tank uses a sliding top cap like the D20 tank did on my last review. I like that there isn’t a fill gasket. That’s a personal preference of mine.

FIINAL THOUGHTS:

To me the iStick i80 has that old school feel like the i40 had. I like it. Maybe it’s because it brings back old memories since I’ve been vaping for over 13 years now. From what I can tell from testing the i80, it is a really solid and lightweight device that has worked flawlessly for me. The 3000mah battery with a 2A charging rate should be sufficient for most people to get at least a full day of use.

The .5 ohm EC2 coil has quickly become my favorite of the two. I feel like I get very good flavor using Dinner Lady Berry Blast in it for testing. This coil really brought out the highlights of this one shot that I’ve been using in a couple other devices. Also, this coil provides a very large amount of vapor with me setting it at 45 watts and having the airflow maybe ¼ open.

The .3 coil is very good also. I ran this one at 40 watts with the airflow 1/3 open and it also produces plenty of vapor while providing very good flavor. Maybe it’s the liquid I chose which is a raspberry custard but the .5 coil ended up being my favorite. The flavor was very good but not quite as good as the .5 coil. Also I should mention that 45 watts seems to be my sweet spot so that may have had some effect on my results.

Despite the i80 appearing to be simplistic, it does have a lot of features. I however find the menu system to me unnecessarily complicated and unless you know what the symbols mean then you may be lost without the user manual like I was. Fortunately for me, you really don’t need to use the menu system if you don’t want to. Just turn the mod on and vape in wattage mode.

So, would I recommend the iStick i80 for you? I would. I feel like it is a solid mod and tank combination and if you don’t like the tank then you can use your own tank on it. This one can be as simple or complicated to use as you want it to be. It has lots of options but they aren’t necessary to use the mod. I feel like the 300mah battery is a good size for an 80 watt mod.

I’d like to thank Eleaf and Adela for sending the Eleaf iStick i80 samples and extra coils for this review. It is much appreciated. Thanks goes out to you the readers. You make this possible. Below is a link to the website if you’d like to take a look at all the different devices available from Eleaf.

Eleaf iStick i80 Kit with MELO C Tank - Eleaf Official Website (eleafworld.com)

Just wanted to wish everyone a Happy Thanksgiving. And hope ya'll get a chance to spend some time with Family and Close Friends.

For what it's worth, Happy Thanksgiving all.

Hello and welcome back for another vape review that comes to me from Sourcemore, I will leave a discount code if you purchase the kit at Sourcemore later in the review. I was pretty happy and excited to have a full sized mod and tank combo to review with so many pods flooding the market and it's a touch screen on top of that. The T- 200 is a dual 18650 device with a maximum power output of 200 watts and has 6 power modes with different themes and wallpapers to customize to the users liking. The mod is paired with the Z-Tank ( 2021 ) that I've reviewed many times in the past on other mods and it works very well. There's a lot to cover with this kit so lets get started.






COLOR CHOICES





IN THE BOX


* 1pc Geekvape T-200 (Aegis Touch) Mod

* 1pc Coil Tool

* 1pc Z (Zeus) Sub ohm Tank 2021 (5.5ml)

* 1pc Spare Parts Pack

* 1pc Spare Glass Tube (5.5ml)

* 1pc USB Cable (Type-C)

* 2pc Geekvape Z Series Coil (Pre-installed:0.15ohm 70-85W, Spare coil:0.4oAS Chip 3.0





AEGIS T- 200 TOUCH FEATURES AND PARAMETERS


* Dimension: 31.12*56.05*141.25mm

* Colors: Silver, Black, Blackish Green, Navy Blue ,Claret Red, Azure Blue ,Rainbow

* Output Power: 5W-200W adjust 1W each time

* Battery Specifications: External Dual 18650 Battery(Not Included)

* Output Mode: POWER,TC-SS,TC-TCR,VPC,SMART,BYPASS

* Powered by AS CHIP 3.0

* Output Voltage: Max 8.5V

* Maximum Output Current: 45A

* Maximum Output Voltage: 12V

* Charging Port: Type-C Port

* Display Screen:2.4 inch TFT Touch Color Screen

* Operating Temperature:-10℃-60℃

* Storage Temperature:-30-70℃

* Humidity Relative:45%RH-75%RH

* Cooling Mode: Natural Cooling

* IP68 Rating Tri-proof mod


Z-SUBOHM TANK ( 2021 ) FEATURES AND PARAMETERS


* Size: 42.5*26mm(Not Including Drip Tip)

* 5.5ML E-Juice Capacity

* Top Filling, Leakproof Design

* Adjustable Top airflow

* Drip Tip:810

* Thread:510 thread

* Resistance Range of Cartridge: 0.1ohm-2ohm

* Geekvape Z Series Coils:

* 0.15ohm Coil , 70W-85W

* 0.4ohm KA1 Coil, 50W-60W


PROVEN SUB-TANK





IP68 RATED DEVICE





2.4 INCH FULL TOUCHSCREEN





AS-CHIP 3.0





4 UI THEMES AND WALLPAPERS TO CHOOSE FROM






FIRST IMPRESSIONS


Geekvape has always been very good with their presentation and packaging and it continues with this kit. A slide box contains the T-200 with all your paper information of owners manual, 2 warning cards and warranty card in a black cardboard envelope with gestures instructions printed on the front for quick reference laying on top. Under the mod is the 2021 Z-Sub-Ohm Tank, 2nd coil, charge cord, spare bubble glass tube, coil removal assist tool and spare parts bag. The first thing that stood out was how large the display screen was ( 2.4 inch ). The t-200 is a full sized mod and not a lightweight, it feels solid and being a IP68 rated mod I'm sure that it is but we will find out.

3FVape Site-wide 10% OFF Coupon for 2022 Black Friday Sale

Coupon Code: 2022BlackFriday

QUICK LINK>>Coupon & Discount - 3FVape

The Lost Vape Thelema Mini 45W Kit, a new generation of tank mods & pod mods with maximum 45W power. The cuter-mini size and built-in 1500mAh battery integrate harmony for satisfying a long-lasting vaping experience. Equiped with two different replaceable UB Lite coils, Thelema Mini constantly strives to provide the excellent flavor delivery and Tight MTL to DTL experience to achieve your nicotine satisfaction. All fit in an elegant and classical appearance, giving indeed the perfect choice as a starter kit.



Power Range: 5-45W
Capacity: 3.5ml (Standard Edition)
Coil Resistance Supported: 0.2-5.0ohm
Current Range:1-15A
Display: 0.69 inch OLED Screen
Battery: Built-in 1500mAh battery
Battery Voltage: 3.0-4.2V
Body Material: Zinc Alloy & Stainless Steels
Charging: Type-C charging
RDL To MTL
...

Click here for more:

Thelema Mini 45W Kit: Lost Vape Thelema Mini 45W Box Mod Kit With UB Lite Tank

Hi guys,
Happy Thanksgiving day!!!!!
Eleaf wish you all have a great Thanksgiving day and Loves you all !!!
Eleaf brings you a Big Big Surprise during Thanksgiveing day.
Just click here to win you Thanksgiving Gifts！
Good Luck all！

Hi ECF,

Happy Thanksgiving! Voting is now LIVE for the Ecigclick awards 2022. We wanna thank you for all the support in the first stage, we have been nominated in a range of categories, we cannot reach this without your help

Ecigclick’s awards allow YOU to have a say and help new vapers identify the best products our industry has to offer. We know you are passionate about promoting the best in vaping and this is your chance to help.



We have been nominated for the following categories:

Vape Brand: Best Overall: Innokin

Best Vape Kit For beginners: Innokin | Klypse, Endura T22 Pro

Best Vape Pen: Innokin | Innokin T18X

Best Pod Vape: Innokin | Klypse, Sceptre 2

Best Vape Mod (Regulated): Innokin | Coolfire Z60

Best Tank (Mouth To Lung Style Vape): Innokin | Zlide Top, Zenith 2

Best Sub Ohm Tank: Innokin | Z Force

Best RBA: Innokin | Ares 2 RTA

Best Disposable Vape Brand: Aquios Bar

Best Facebook Group: Future of Vaping

Click here to find the voting page

Thanks to everyone who has supported us in the past years of voting. Your recognition helps us reach new vapers and transitioning smokers across the world

Regards,
Innokin team

Hello everyone, what I want to test for you today is a vandy vape pulse aio mini kit made by vandy vape. I think most users should know about vandy vape pulse aio kit and aio.5 kit before this. In terms of specifications, this new one will be a little smaller. In fact, it is indeed necessary to improve this point, because considering that vapers may want to take the electronic cigarette out at any time, it may affect the use and carrying of some users if it is too large.

The panel this time can still be replaced at will, and it adopts a richer pattern design, which gives people a very cool feeling overall. In addition, the pods configured this time are 4.6ml RBA Pod and 5ml Pre-built Pod. Pods require you to install from within.

The AIO mini vape kit is compatible with a single 18650 battery, which you can always replace. Mini Kit equips you with a USB Type-C charging interface, you can achieve fast and stable charging. In order to ensure the normal output of this large device, it also provides 6 protection functions, open circuit protection, over-current protection, 10 seconds cut-off, short-circuit protection, over-temperature protection and low-battery warning.


The maximum output is 80W, of course, it will provide you with the best output according to the resistance of the kit and the current operating conditions. Variable power between 5-80W.

The existence of the Vandy Vape Pulse AIO Mini Kit is to facilitate more users in need. I think you can also have your own judgment through various performances. Vandyvape believes that it is worthy of your trust.

Our cyber monday vape sales are going on, and you are welcome to participate.

I also want to recommend for you:
elfliq
uwell crown d pod kit

Pulse AIO Mini Kit from Vandy Vape is small and lightweight. It has the Lexan EXL1414T polycarbonate reinforced body, supports 18650 battery. It includes round & square button and matching panel. You can enjoy DIY funny with Vessel 2 DIY RBA Tank that holds 4.6ml capacity, you can also enjoy coil vaping with Vessel Pre-built Tank that holds 5ml capacity and is compatible with VVC coils. The Vessel 2 DIY RBA tank is designed with curved 180 degree airflow. Adopting USB Type-C, it will offer reliable power and smooth charging. Pulse AIO Mini Kit supports Wattage/Temp control/Voltage/Bypass/Smart Mode.

Pulse AIO Mini Specifications:
Size: 52.5*92.5*26.2mm
Power Range: 5-80W
Output Voltage: 0.5-6.0V
Maxim Output Current: 32A
Charging Input Voltage: 5±0.25V
Resistance: 0.05-3.0Ω(±5%)
Charging Current: 1000mAh
Battery Type: 18650 battery(not included)
RBA Pod Capacity: 4.6ml
Pre-built Pod Capacity: 5ml

More Details of Vandy Vape Pulse AIO Mini
1. Lexan EXL1414T polycarbonate reinforced body
2. New square button and matching pane
3. Included round button, matching inner panel and round button
4. Vessel 2 DIY RBA Tank with curved 180 degree airflow
5. New airflow adjustment adaptable RBA with 4.6ml capacity
6. Vessel pre-built tank, compatible with VVC coils
7. Supports 18650 battery
8. Wattage/Temp control/Voltage/Bypass/Smart Mode
9. Small and lightweight
10. USB type-c charging
11. Safety protection: Open Circuit/Over-current/10S Cut-off/Short Circuit/Over-temperature/Low-battery Warning Protection



Recommended products: Menthol Flavor

Justfog Minifit-S Plus Kit

Minifit-S Plus Kit is powered by a built-in 650mAh battery with 12W constant wattage and Type-C charging. Designed with the LED battery indicator, it can clearly show you the battery status. It features the auto/button activation system for convenient use and multiple protections for safe use. In addition, it also features 1.9ml capacity, easy bottom filling system and 0.8Ω coil resistance.

Details:
1. Mesh coil structure for better flavor
2. Auto/button activation system
3. 0.8Ω resistance, 1.9ml capacity
4. Built-in 650mAh battery
5. LED battery indication
6. Type-C charging
7. Smart battery protection




Vandy Vape Pulse AIO Mini Kit

Pulse AIO Mini Kit is small and lightweight. It has the Lexan EXL1414T polycarbonate reinforced body, supports 18650 battery. It includes round & square button and matching panel. You can enjoy DIY funny with Vessel 2 DIY RBA Tank that holds 4.6ml capacity, you can also enjoy coil vaping with Vessel Pre-built Tank that holds 5ml capacity and is compatible with VVC coils. The Vessel 2 DIY RBA tank is designed with curved 180 degree airflow. Adopting USB Type-C, it will offer reliable power and smooth charging. Pulse AIO Mini Kit supports Wattage/Temp control/Voltage/Bypass/Smart Mode.

Details:
1. Lexan EXL1414T polycarbonate reinforced body
2. New square button and matching pane
3. Included round button, matching inner panel and round button
4. Vessel 2 DIY RBA Tank with curved 180 degree airflow
5. New airflow adjustment adaptable RBA with 4.6ml capacity
6. Vessel pre-built tank, compatible with VVC coils
7. Supports 18650 battery
8. Wattage/Temp control/Voltage/Bypass/Smart Mode
9. Small and lightweight
10. USB type-c charging
11. Safety protection: Open Circuit/Over-current/10S Cut-off/Short Circuit/Over-temperature/Low-battery Warning Protection

Freemax Lighting Season comes now! In order to celebrate Thanksgiving, now Freemax invites you to join in the Thanksgiving activity in 2022. Every participant will have a chance to win a Thanksgiving gift.

How to join in the activity?

1. Pick the new Freemax item you want as a gift.
2. Share the generated image on Instagram and comment with your reasons.
3. Add hashtag "freemaxthanksgiving", follow and tag at Freemaxvape

Please click here to participate in this activity>> Thanksgiving Activity 2022 | FREE MAX. FLAVOR MAX.



Which product will you choose as your Thanksgiving gift?
1. Freemax Maxus Series Products: Maxus Max Pro 168W Kit & Maxus Solo 100W Kit
2. Marvos X Pro 100W Kit
3. Freemax Galex Series Products: Galex Nano & Galex Pod System Kit
4. Starlux 40W Pod Mod Kit
5. Other Products: Twister 2 80W Vape Pen Kit & Maxpod 3 15W Pod System Kit

There will be three lucky friends chosen to take the gift! And the valid time of this activity is from Nov 23rd, 2022 to Dec 8th, 2022. Please seize the chance. Do you want more chances to win Freemax vape devices? Don’t miss the next round of activities to win your Christmas gifts. The Christmas activity will start on 19th Dec 2022.

I’m back today with my second review for JWEI (Eleaf). This time I’ll be taking a look at the iStick i40 mod kit that was sent to me by JWEI in order to provide another fair, honest, and hopefully informative review on this device. The i40 kit comes with the i40 mod which has an internal 2600mah battery that is charged via a 5V/1A USB-C charging port on the mod. It is a simplistic device that offers only VV or VW. That being said, I usually only run VW on my mods anyway so it’s no big deal that it doesn’t have TC or any other modes. The tank included is the GTL D20 which is a pod tank with a 3ml capacity and uses the GTL series coils. I don’t see many 40 watt devices on the market that are actually mods any more but am guessing this one is targeted at the MTL crowd since it comes with the two higher resistance coils of the GTL series.





WHAT’S IN THE BOX?

1* iStick i40
1* GTL D20 Tank (3ml)
1* GTL 1.2Ω Coil
1* GTL 0.8Ω Coil
1* USB Type-C Cable
2* User Manuals
1* Warranty Card

SPECIFICATIONS:

Product Size: 34.8mm x 25.2mm x 131.3mm

Battery Capacity: Built-in 2600mAh battery

Charging Current: 5V/1A (USB-C)

Variable Wattage (VW): 1-40W

Variable Voltage (VV) : 0.5-8V

Tank Capacity: 3ml

Filling: Top filling

Airflow: Adjustable airflow

Fit For: GTL Coil

Color: Cyan, Neon Orange, Fuchsia Pink, Greenery, Black

FEATURES:

1. Combines leather with metallic materials

2. Minimalist design and comfortable grip

3. Built-in 2600mAh battery

4. Optional VW / VV mode

5. Adjustable and precise airflow

6. Magnetic connection

7. Easy slide-and-fill system

8. 3ml e-juice capacity

9. Fit for GTL Coil and GTL D20 Tank

10. Plug-and-play coil replacement

INITIAL THOUGHTS:

The packaging for the iStick i40 is almost identical to the packaging I saw with the FlasQ that I very recently reviewed. They arrived in a black box with the large green Eleaf symbol on the front and back with a small picture of the device on the front and the name. The back just has the same symbol and a warning near the bottom.

Eleaf once again decided to put the contents list, specifications, company information, and a bar code on one side. The opposite side has an authenticity code and some icons with a few features listed. I’m not sure why but just like the last one I reviewed, the sticker letting you know that the kit comes with the new black mesh GTL coils is attached on the corner of the box.

Once the tray is slid out of the box, the iStick i40 is visible sitting in a foam insert with the GTL D20 tank sitting beside it. Underneath the foam insert is where you will find the remaining items included in the kit. They are a warranty card, user manuals for the mod and the tank, a USB-C charging cable, and two black mesh GTL coils. The coils included with the i40 are the .8 ohm GTL coil that we saw before in the FlasQ kit which is rated for 12-18 watts and the 1.2 ohm black mesh GTL coil rated for 7-13 watts.

The i40 is wrapped in what feels like a padded fake leather material on both sides and around the back. I received the orange and pink versions for my review. On one side of the mod there is the iStick i40 name stamped into the material and on the opposite side is the Eleaf name and insignia stamped. The back side is just smooth. It has a nice feeling in the hand and is very lightweight.

The top of the mod holds the slightly raised 510 connection with a gold plated spring loaded center pin and there are two torx head screws holding the top plate in place. Not much to look at on the bottom but there are three battery vent holes which is something we don’t see on all mods. I find it interesting that the 510 outer plate has four grooves cut out in it which would make me think of old mods and tanks where the airflow came in from the bottom or something.

The i40 has a maximum output of 40 watts and has an internal battery rated at 2600mah which should provide at least a full day of vaping for most people depending on the topper used. Of course it does have a standard 510 connection so you could run any tank on it but will be limited by the 40 watt output.

The front of the i40 has a large round fire button on top followed by an OLED display screen, the + and – buttons, and the USB-C charging port on the bottom which only charges at 1A. I would have thought it would have been good to have a 1.5 or 2A charging rate with a 2600mah battery. The display on this one is rather simple like the FlasQ. It shows only Coil Resistance, Set Wattage or Voltage, and a Battery Level Indicator. Although it is a simplistic mod, it does have a few button operations. They are as follows.

• Press the fire button 5X to turn the device on/off
• Press the fire button 3X to enter the Setup menu
• Once in the setup menu, press the + or – buttons to navigate to VW, VV, or Screen to turn on/off the screen(stealth mode)
• Press the + and – buttons to lock the adjustment buttons but the mod will still fire
• Press the fire button and the – button to flip the screen 180 degrees

The i40 seems to have the same safety protections as the FlasQ. I have a feeling that it’s the same chip. The safety protections are as follows.

• Low Volt = Battery is below 3.3V and display will show alert and shut off until charged
• Short = Alert will show on screen if coil resistance read is below .2 ohms
• Over 10s = Unit has a 10 second cutoff
• Check Coil = No coil is detected
• Unit has a resistance range of .4-3.0 ohms

The tank included in the kit is the GTL D20 which is a magnetic base pod with a 510 threaded base connection. As always, I recommend disassembling and cleaning any tank before using it. The tank is broken down into three parts which are the 510 threaded base, the pod portion, and the 510 drip tip. When the unit is first received, there is not a coil installed in the pod.

The base of the pod portion has four magnet to hold the pod into the 510 base. The GTL coils are simply pushed into the pod to make a leak resistant seal. The inside of the 510 base has a metal ring around the upper outside giving the magnets on the pod a place to attach. Below that are two spring loaded gold plated contacts that apply the power from the mod to the coil. The pod has a sliding top cap that you simply push to one side where the arrow is on the top cap to expose the fill port. I like that it doesn’t have a fill gasket.

The D20 has two separate sets of airflow holes to allow the user to obtain a nice MTL or a somewhat restricted RDL experience. The airflow adjustment ring is built into the 510 base. There are four smaller holes for MTL and four larger holes for RDL. The airflow ring does have a positive stop.

FINAL THOUGHTS:

To me the iStick i40 brings back memories of old school mods. Back in the day I had a handful of the original iSticks like the iStick 30. The display on the i40 is simplistic yet gives the necessary information that you need. Would it be nice to have a puff counter? Yes but not really needed. I like that they made the i40 with a standard 510 connection instead of making it a pod mod connection. This way you can also use any of your tanks that will operate with less than 40 watts of power. With a maximum voltage of 8V it obviously has a boost circuit which should help with higher resistance coils. It’s very lightweight even with the D20 tank installed and could see it being used as a pocket carry mod. However, with the magnetic pod base you can knock the pod off the base. The 2600mah battery should be enough to last most people for a full day at least.

The D20 tank holds 3ml of liquid and surprised me as to how long it lasted especially when using the 1.2 ohm GTL coil. I decided to use a 24mg salt that I had left over from another review to test this coil and ran it at 12 watts. Flavor production was pretty good and even with the four smaller airflow holes open it was a fairly restricted MTL. You can close off more holes if you like an even tighter MTL.

With the .8 ohm coil I ended up at 17 watts but could easily run it at the maximum rating of 18 watts. I had all four of the larger airflow holes open and got good flavor but it was still a little too restricted for an RDL that I like. I think if there had been one more of the large holes then it would have been a better fit for me.

So, would I recommend the Eleaf iStick i40 for you? If you are a low wattage vaper and like smallish lightweight mods then yes I would. I’ve really enjoyed testing it. I would like to thank Eleaf and Adela for sending the Eleaf iStick i40 samples for this review. Thanks to you the readers also as always. Stay tuned because I have more reviews coming soon. Below is a link to the Eleaf website for your viewing pleasure.

Eleaf iStick i40 with GTL D20 Tank - Eleaf Official Website (eleafworld.com)

Lost Vape Thelema Mini is equipped with 1500mAh battery, 11-45W output and 0.69" OLED screen, compatible with 3.5ml UB Lite Tank and UB Lite Coil.

It can meet all your expectations as it is specially designed for vaping from MTL to DTL And with the undeniable ability to control your kit from the 0.69" OLED display.

Features
• 11-45W Output
• 510 Thread
• From Tight MTL to DTL
• Nic Salt or Freebase
• 1500mAh Internal Battery
• Compatible With UB Lite Coils

The finish is flawless, with beautiful graphics printed on the sides, and the curves and lightness make it ergonomic and comfortable to hold. The UB Lite Tank holds 3.5ml of Nickel Salt and Free Base and connects via 510 thread.

It's compatible with UB Lite coils, plus an adjustable control ring to give you a personalized experience from restrictive vape to venting. For more details, you can click here to learn more: Lost Vape Thelema Mini Pod Mod Kit 1500mAh 45W

Other kits you may prefer:

I've got a bunch of Serpent Minis for sale.
Location: New Hampshire

All these are 7-8/10 - After all, these are 5+ year old items - the white gaskets are yellowed a bit, the decks might show some wear, etc - but I am always easy on my gear and all these are perfectly servicable.

Verification: Login to view embedded media
Album: Login to view embedded media
A few years ago, I thought I had found my end-all RTA - the Serpent Mini
With all the rumors of the Vaping Sky falling all around us, I scooped up everyone I could find - 15 to be exact.
But then I did a really stupid thing and Alice'd myself down the Boro-hole, and now my precious Minis sit unused.

5 SS - $20 each Login to view embedded media No boxes, but come with colored gaskets sets and AT LEAST one spare glass.

These 4 don't have the stock driptips or extra gaskets but will come with a spare glass
They come as pictured: Login to view embedded media $15 each

I add a one-time shipping fee of $5 for CONUS USPS Priority with Tracking and $50 insurance
Ask about buying multiples and we can make a deal!