Hello, today let's take a look at VooPoo Doric Q. In this Test I will examine each of the characteristics that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► VooPoo Doric Q; Before starting, let's see together some special features indicated by the manufacturer:
• Lovable and affordable with gorgeous color and crystalline luster
• Users can get DORIC Q at a lovely price
• Long life of built-in 800mAh battery
• VOOPOO ITO cartridge with pre-installed durable VOOPOO ITO lasts up to 10 days of vaping
• VOOPOO ITO atomization technology for MTL vaping.



► VooPoo Doric Q; Packaging:
The small cardboard box shows on the front; the name of the brand (VooPoo), the image of this item, the name (Doric Q) and the color (Primrose Yellow).
On the back of the box are listed; the content, warnings, legal logos/trademarks, contact details of Woody Vapes Technology C0.,Ltd,.
On the side profile of the package are present; some main features in the form of icons, the barcode, some Qr-codes and the scrath & check.





► VooPoo Doric Q; Packing List:
1* Doric Q Device
1* Disposable VooPoo Ito Cartridge (2ml) of 1.0Ω
1* User Manual



► VooPoo Doric Q; Specifications:
• Dimensions: φ23.2 x 95.6mm
• Built-in battery capacity: 800mAh
• Output power: 12W
• Extraction mode: Automatic
• Output voltage: 3.2-4.2V
• Charging voltage: type C 5V/1A
• Supported resistance range: 0.6Ω-3.0Ω
• Material: polycarbonate
• E-liquid filling: Lateral
• Cartridge： VOOPOO ITO 1.0Ω (2ml TPD)
• Compatible cartridge: ITO 0.7Ω/1.0Ω/1.2Ω, VOOPOO ITO Pod, VOOPOO ITO-X Pod



► VooPoo Doric Q; Available colours:
• Mint Green
• Primrose Yellow
• Navy Blue
Misty Rose
• Chartreuse Yellow
• Deep Brown
• Begonia Red



► VooPoo Doric Q; First Impressions:
Doric Q is the new minimalist VooPoo Kit whose design is inspired by the older brothers Doric 20 & Doric 60. Doric Q is a device created for MTL vaping and is equipped with a food-grade PCTG cartridge which houses a special integrated ITO resistor. The automatic extraction and the presence of a single LED light make it easy to use Doric Q even for beginners.



The double-injected plastic material makes the Doric Q light as a feather and aesthetically appealing with a beautiful sheen. The shapes are smooth and fluid, the reduced diameter enhances the handling qualities. On the body of Doric Q there is a single "VooPoo" writing, above this writing there is the only LED light that sends notifications as follows:
• During the battery recharging phase, the LED light is fixed blue.
• When the battery has been recharged, the LED light is steady green.
• During use, the LED light is green.
• When the pod is inserted into the device the green light flashes once
• When the battery power is low, the green light flashes 10 times
• When the extraction time limit is reached, the green light flashes 2 times
• When a short circuit occurs, the green light flashes 1 time

Doric Q's chipset makes it safe to use with the following security features:
• Time out: 8s
• Short circuit protection
• Low battery protection
• Overload protection
• Output overcurrent protection





Doric Q can be recharged and kept standing, the 800mAh battery recharge time is about 50 minutes. Above the charging port you can see the only airflow that has a size compatible with MTL type vaping.



There are 3 prominent battery safety vent holes on the bottom of the Doric Q.



The pod compartment contains the spring-loaded and gold-plated contact pins, and there is also the sensor for the automatic puff raised above the bottom. The cartridge uses a simplified interlocking system without magnets, the graft is quite effective. Before using the cartridge, remove the protective sticker. Doric Q is compatible with VOOPOO ITO-X cartridges and Doric 20 cartridges. The chipset of Doric Q is able to support 0.7Ω/1.0Ω/1.2Ω Ito carthridges.





The DORIC Q Kit features the newly released VOOPOO ITO cartridge with a pre-installed 1.0Ω coil supported by VOOPOO ITO atomization technology for MTL vaping. It is a cartridge with a small circular design, the drip-tip is fixed and non-replaceable, filling takes place laterally. The "ITO Anti-Leakage Structure" system of this cartridge provides two slots with an internal air passage to a rather elaborate cavity, this proven solution effectively protects the Mod from the condensation of the electronic liquid.



► VooPoo Doric Q; Vape Test and Final Conclusions:
For this test I used "crispy puft" aroma diluted 10% in a 50:50 PG/VG base with 3mg/ml boost. The 1.0Ω Disposable VooPoo Ito (2ml) cartridge seems to reflect the declared power data (12W), the extraction is of the MTL type, perfectly balanced in my opinion. The steam is hot at the right point and there are no spitting or condensation phenomena even after intense use. The integrated 1.0Ω resistance is able to effectively convey the flavor, also emphasizes the nicotine present in the e-liquid. Consumption is quite low, also according to VooPoo a cartridge lasts up to 10 days of vape before being recycled. Ultimately Doric Q is a pocket and stealthy vaporizer, really comfortable to carry, the 800mAh battery recharges in a short time and offers a good vape autonomy. Its appearance is lovable and its purchase price will certainly be interesting and convenient.

I would like to thank VooPoo for providing me with the kit. I hope this review has been helpful for anyone looking to buy Doric Q.

Thanks for reading.

Hello everyone, what I want to recommend to you today is a new product from voopoo, the voopoo doric q kit. First of all, this is a very beginner-friendly e-cigarette. It uses a built-in battery of 800mAh, and the maximum output can reach 12W. This e-cigarette can be recharged repeatedly, and basically, it can be used for 1-2 days with one charge. The stable output allows you to have a consistent flavour no matter what the situation.

Doric Q Kit is perfectly compatible with voopoo ito-x, has a regular capacity of 2ml, and you can quickly fill it by pulling out the rubber plug on the side. The ITO leak-proof structure can effectively prevent condensed water from leaking into the battery and place it firmly under the coil to give you the best suction experience.


The double-injection design makes doric q not only wear-resistant but also very attractive with bright colours. It is still an inhalation-activated pod kit, and there is no burden for novices to use. Five output protection measures can also effectively extend the service life.

I don’t know if you need such a portable electronic cigarette, but its output performance is believed to make you have a happy mood all day long. We have also launched many new products in the uk online vape shop, which are definitely worth your expectation, and I believe they will make your stay.

You may also want to know:
uwell ak3
smok propod

-2ml E-Liquid Capacity
-20mg Nicotine Salt
-Inhale-Activated
-550mah Battery
-Mtl Vaping
-Up To 600 Puffs

The appearance of the new flum mi disposable vape kit is shaped like a beer bottle, with 10 bright and vibrant colours and gradient patterns, which are eye-catching and very fashionable. Its overall body is compact and slim, with a comfortable grip, making it easy for you to carry. The mouthpiece of this disposable cigarette is very ingeniously designed, conforms to ergonomics, fits the curve of the lips, and has a unique shape, which can bring you a more comfortable and enjoyable feeling.

This disposable vape kit has a built-in 400mAh battery, which can provide you with sufficient battery life and power support to meet your vaping needs. If you are worried about running out of battery and causing trouble, this disposable cigarette has a low battery reminder, which allows you to prepare in advance and give you a more secure user experience. At the same time, it also has multiple functions such as short-circuit protection and 5-second timeout protection to maximize your safety.

You can enjoy 600 puffs with the Flum MI Disposable Vape Kit, which is enough for most people to use for 1-2 days. The interior is pre-filled with 2ml of e-liquid, and the nicotine concentration is 2%. It has as many as 10 different flavours for you to choose from, and each flavour is carefully developed to allow you to enjoy the wonderful taste of electronic cigarettes.

More new products are available in our vape online uk, you are welcome to choose.

You might also like：
vaporesso luxe x r uk
aroma king dark knight 10000 hot sale

Shop the Doric Q 18W Pod System of VOOPOO, featuring a 800mAh battery, PC material construction, and utilizes an integrated coil ITO Pod combination. Constructed in a diminutive and lightweight manner, the chassis of the Doric Q is easy to transport and makes a great companion when running errands or exploring the outdoors. Utilizing the ITO pods with an integrated 1.0ohm coil, the Doric Q Pod System can deliver delicious flavor and vapor that will tantalize the taste buds.

Equipped with an 800mAh battery, the Doric Q will last throughout the day with moderate use but can be recharged via USB-C port mounted on the back. Eliminating any buttons or screens, the Doric Q is simplified to extend the battery life, concentrating power to vapor delivery. Maintaining a slew of protections, the Doric Q is the perfect beginner's starter kit or a reliable workhorse for those that do not need any unnecessary bells and whistles.

More Details of VOOPOO Doric Q
Dimensions: 95.6mm by 23.2mm Diameter
Battery Capacity: 800mAh
Voltage Range: 3.2-4.2V
Resistance Range: 0.6-3.0ohm
Chassis Material: PC Material
Charging: Type-C Port
Operation: Draw-Activated
Pod Series: ITO
Fill System: Side Fill System
Pod Material: PCTG
Pod Capacity: 2mL
Pod Connection: Magnetic



Recommended products:
freemax maxus 2
caliburn tenet koko

The Geekvape E100i (Aegis Eteno i) Pod Mod, featuring a 3000mAh battery, a 4.5ml pod, 200-600F temperature control, and 5-100W of adjustable wattage. There are Smart/Power/Boosting/VPC/TC-NI/TC-TI/TC-SS/TC-TCR mode for your option. The smart mode can automatically select the suitable output to bring you the best flavor and prevent coils from burning out. Equipped with 1.06 inch TFT color screen, it can clearly show you the necessary vaping information.



Features:
1. Top Airflow Leakproof
2. Pod with High Compatibility
3. IP68 Rating
4. AS-CHIP 3.0
5. 100W Max Output
6. Internal 3000mAh Battery
7. P Series Coil Compatibility
...

Click here for more:

Geekvape E100i Kit: Geekvape E100i (Aegis Eteno) Kit

For more details regarding VAPORESSO CARE - CARING IN MOTION event please visit: https://www.vaporesso.com/activity/vaporesso-care

File under ; One thing leads to another ..

I drowned a couple of my favorite small devices ( vaporesso target mini 2 ) recently.
In the search for a suitable replacement, eventually decided on the Vaporesso gen fit 40 which came with the itank X using GTX coils.
Never really planned on using the supplied tank as I've been coiling & wicking either a Dvarw or Pioneer RTA for several years & have been happy with their performance, or so I thought.
On a whim, I primed & fit the 1.2 coil in the Itank X & gave it a try. Wow ! , apparently pre-made drop in coils have come a very long way in recent years. It was good .. really good, & only needed 10-11 W so battery lasted over a day in the tiny device !
On a recent vacation - I never once had to re wick or otherwise fiddle with a device over 9 days using one drop in coil in that Itank X all while getting great consistent flavor the entire time. Like that a lot.
These GTX coils seem to last much, much longer than my self coiled & wicked RTA's. The convenience is worth the $$ spent on coils given their long life & great flavor. Vaporesso has some things figured out it seems.

So there's the back story, since these GTX coils have performed so well, I'm contemplating the purchase of another Vaporesso tank compatible with those. Which one ? , it appears Vaporesso makes several other versions.
The one & only negative I can attribute to the ITank X & GTX coils is the system is a bit noisy compared to especially the Dvarw RTA's Ive been using. Not a deal breaker, but still ..

Looking for a recommendation for another Vaporesso GTX compatible tank with easy top fill, & if it were to be relatively quiet, that would be a very nice upgrade from the ITank X.

Thanks in advance to one & all, CBG.

.

I hope everybody had a good one

Big clean out

Pulse AIO Kit x3 Frosted Black, Frosted White, Frosted Green Original Packaging, Manuals, Pulse Vessels and VCC Coil Tanks $45ea
Jaybo Reuleaux DNA200w Triple Battery Mod Grey/Silver $40
Lost Vape Triade Reuleaux Triple Battery Mod Black/Carbon Fibre DNA200 Color $45 (Screen is slightly glitched.
But hardly noticable)
Lost Vape Grus 100w 21700 x2 $30ea
Digiflavor Z1 SBS Mod and Siren 3 RTA $35
VandyVape Gaur-21 Dual 21700 200w Mod Black/Blue Resin $45
QP Design x GM Mods Lethal RTA $45
Hellvape DESTINY RTA $15
Aspire Kumo RDTA x2 SS/Matt SS $30ea
All prices in AUD cash only.

All listed are in excellent condition and most if not all
come with original packaging.
Willing to ship within Australia at buyers expense.
Pickup in Seaford, Adelaide, South Australia

Hello folks and welcome back for today's review of the Pulse AIO.5 Kit that was sent to me from HealthCabin for review. The Pulse AIO.5 is a updated version from the original Pulse AIO having a stronger frame with a metal interface for the 510 nut and having a updated chipset as well. The Pulse AIO.5 can be customized with different panels and a 2nd set made for the round button is included in the kit, also this kit includes a round button with matching inner panel. For you temperature control users there are TC power modes including TCR along with other power modes ( Smart, Wattage, Voltage, Bypass ). There are 2 versions available with 1 having the Vessel Tank for drop in VVC coils with the other version having a RBA Vessel Tank as well as the standard Vessel Tank. The Pulse AIO.5 has a maximum power output of 80 watts and is powered using either a 21700, 20700 or 18650 battery, a 18650 battery adaptor is included in the kit. There's a lot to cover on this review so lets get started with some information from VandyVape and then I'll give you my assessment of the Pulse AIO.5 Kit with my honest review.





COLOR CHOICES





IN THE BOX





SPECIFICATIONS AND PARAMETERS





FEATURES


* Power Range: 5W-80W

* Battery: 1 X 20700 / 21700/18650 ( With Supplied 18650 Battery Adaptor )

* Mode: Wattage, Temp Control, Voltage, Bypass, Smart Mode

* Adjustable Positive Pin

* Operating Voltage: 3.2-4.2V

* Maxim Output Current: 32A

* Output Voltage:0.5-6.0V

* Charging Input Voltage: 5±0.25V

* Resistance:0.05-3.0ohm

* Charging Current: 1000mAh

* Open Circuit Protection

* Short Circuit Protection

* Over-current Protection

* 10 Seconds Cut-off

* Over-Temperature Protection

* Low-Battery Warning

* USB Type-C Port For Charging

* Vessel RBA Pod Capacity: 3.7ml

* Vessel Pre-Built Pod Capacity: 5ml

* DIY and Coil Compatible

* Pre-Built tank compatible with VVC Coil

* Curved 180 degree airflow with DIY Vessel RBA Tank


TWO VESSEL TANK CHOICES






VVC COIL VESSEL TANK







RBA VESSEL TANK





THREE BATTERY OPTIONS





TYPE - C

Like it says I’m mainly trying to hunt down a gem RTA v1 or v2 is fine, just needs all the parts.

In’ax v3 18mm and In’ax v5 would be pretty cool too but I rarely see Athea mods stuff

And hellfire attys just because i kind of have a thing for Genesis RDAs/RTAs right now plus this is like the most active B/S/T forum so I might as well shoot my shot.

Hey everyone, I bought a Vaporesso Swag PX80 a while back. I used it for a few weeks, and I noticed that it just leaks all the time. I made sure to make sure that the coils were seated in the pod tank the right way, and made sure that the drip tip lock feature was engaged to hold the coil in. Even after changing the coil, and the pod tank three or four different times it just continued to leak terribly. Has anyone else had this issue with this device? If so, have you found any way at all to fix it? Thank you.

Hello everyone, today is a new week, I would like to introduce to you a brand new electronic cigarette, lost vape ursa baby pro kit. As a very friendly electronic cigarette for beginners, it is very simple and easy to operate, and very easy to carry. In terms of operability, it provides you with buttons and inhalation activation methods, which are very user-friendly.

Paired with a 900mAh battery for battery life, which can basically maintain the vaping demands for most of the day. If the battery is exhausted, it can also be quickly charged through type-c.

The 2.5ml ursa nano pro pod cartridge, I don’t know if you are familiar with it, is also compatible with the ursa nano pro kit, with the adjustable airflow key, you can achieve MTL and RL vaping at the same time. UB Mini S1 Coil can also fully volatilize E-juice allowing you to enjoy a stronger flavour, and the life of the coil is also increased by half.


The intelligent lost vape quest chip provides you with overheat protection/short circuit protection/weak battery protection, giving you a great sense of security. Whether you put it in your pocket or hold it in your hand, it is light and comfortable without adding any burden.

We have prepared more affordable e-cigarettes in christmas vape sale uk, you are welcome to check them out.

You may also in fond of:
cheap luxe xr
xros 3 mini uk

The latest creation from Lost Vape - the Ursa Baby Pro Pod Kit is the professional version of the Ursa series.This Ursa Baby Pro Lost Vape Pod Kit is an electronic cigarette that fits perfectly in your pocket. It is a wonderful creation with which you can enjoy a great tasting vape with a maximum of 25W of power (adjustable from 5-25W). The model has a built-in 900mA battery and a C-type charging port with fast charging.

The new construction includes, of course, an air regulation to switch between MTL and RDL puffs.This high-tech Lost Vape Ursa Baby Pod Kit is equipped with a bright OLED screen to clearly display detailed data and provide you with easy operation.The upgraded version of the 2.5ml Ursa cartridge provides 50% longer vaping time and twice as many flavours!Constructed from high quality zinc alloy, it features a cartridge with integrated 0.6 ohm resistance or replaceable resistance cartridge.

More Details of Lost Vape Ursa Baby Pro
Dimensions: 46.5x15.2x15.2x71.6mm
2.5ml cartridge (with integrated resistor)
Made of aluminium alloy
Power: 5-25W
OLED display
Charging via USB-C
MTL/RDL output



Recommended products:
freemax starlux
smok rpm 100

Dear wholesale customers,

Here we bring Healthcabin new round of brand discount – December Brand Discount Round 2 for you to save more on different vape-brand products, with 2 vape deals in total.

Take the chance to join us while offer lasts~

A. 3% OFF for Selected Brands​

Promotion Details

• Discount: 3% OFF for 10 selected hot brands
• Date: 25th – 31st Dec, 2022(-0600 GMT)
• Wholesale ONLY
• No coupon code required, total discount amount can be found at your shopping cart.

Promotion Brands

B. Buy 1 Get 1 Free​

Another attractive promotion – buy 1 get 1 free is available for selected products, limited offer, first come first served! Check all selected products here.

With any questions, please feel free to contact your account manager.

Please view the December Brand Discount – Round 2 here.

I need some help changing from 6% nic to a 10% solution. I downloaded the e-juice me Up program but I can't seem to wrap my mind around this. Here is a very small batch that I used the 6% solution: 48 ml Nic, 16ml distilled water, 64ml flavoring, 192ml VG. The Nic is 10% in a 100%VG. I'm sure this comes easy to some of you....wish it was for me. I appreciate the help!!

Happy xmas

Looking for a Fatality

Hot off the heels of the release of the SL2 and G2 classes, SXMini have decided to go down the road of the Boro device, but the road they went down is a path much less walked compared to the "standard" Boro tank device, think DotMOD DotAIO instead of the usual BilletBox...

CHAPTERS

00:00 - Intro and specs
05:00 - Close Up
15:00 - Vape
16:00 - Thoughts

Rumble - https://rumble.com/v21vn8u-the-sxminiyihi-vi-class.html?mref=z0wfa&mc=kybb8

YouTube - Login to view embedded media

Just wanted to take a Moment to Wish Everyone a Very Happy Holiday. And Hope that tomorrow finds You and Yours in Good Health and Spirits.

Hello again. I’m here once again with yet another review for your viewing pleasure. At least I hope it’s a pleasure. I was sent the Wotofo Profile X RTA by Wotofo in order to provide you with a fair and honest review. The X is a 28mm RTA that comes with three different types of mesh sheet coils as well as two standard type coils. It has a liquid capacity of 5ml/8ml depending on whether you choose to use the straight glass pre-installed or the spare bubble glass that is included. It is a top airflow RTA so you won’t have to worry about leaking and uses honeycomb style airflow in two rows of holes. Besides being a mesh tank, it has four holes where you can insert two standard coils. It promises that you can also use it in single coil configuration but we will have to see how that goes since a lot of dual coil tanks don’t perform all that well with single coils. Like most tanks these days it has a ¼ turn top cap that is removed to find two large fill ports underneath.





WHAT’S IN THE BOX?

1* Wotofo Profile X RTA
1* nexMESH Chill A1 0.15ohm
1* nexMESH Turbo A1 0.13ohm
1* nexMESH Extreme A1 0.16ohm
2* Framed Staple Clapton Ni80 0.33ohm
3* 6mm Thick Cotton Strip
2* 3mm Thick Cotton Strip
1* 8ml Bubble Glass
1* Mesh Bending Tool
1* Cross Head Screwdriver
1* Accessory Bag
1* User Manual

SPECIFICATIONS:

Size: Φ28*43.7mm (with drip tip & 510 pin)

E-liquid Capacity: 5ml (straight edition), 8ml (with bubble glass)

Filling: Top filling

Airflow Type: Adjustable top airflow

Build Deck Diameter: Φ28mm

Threading: 510 thread

Supported Coil Type: Single mesh coil

Single wire coil

Dual wire coil

Fit For: Wotofo nexMesh Chill/Turbo/Extreme Coil

Cotton Deck Material Ceramic

Drip Tip Material & Connection: Size 810 colored resin

Tube Material: PCTG for straight tube, glass for bubble tube

Insulator Material: German PEEK

Color: Black, SS, Gunmetal, Gold, Blue, Rainbow

FEATURES:

1. Supports both mesh coil and single/dual wire coil

2. Fit for all of the Profile mesh (nexMesh Chill/Turbo/Extreme)

3. 5ml/8ml e-juice capacity, top airflow system

4. Honeycomb airflow control, smooth vapor & delightful flavor

5. Quarter turn top fill system with dual fill ports

INITIAL THOUGHTS:

The packaging for the Profile X is the same as what I’ve seen from Wotofo in the past with other samples that I have reviewed. The front has a clear cover with the Profile X and Wotofo names printed on it. You can clearly see the tank and the spare bubble glass that boosts your liquid capacity from 5ml to 8ml. This one is a little different as it only has some warnings and company information on the back. The contents list is printed on the side of the box. It comes with quite a bit of stuff which includes two Ni80 coils rated at .33 ohms, three different mesh strips, cotton threads for all three mesh strips as well as cotton for the two Ni80 coils, a small phillips screwdriver, a coil shaping rod for the mesh, and an accessory bag with extra screws and o rings.

I personally don’t care much at all for the really short drip tips that come with Profile X. It is a nice looking resin tip but I don’t like putting my mouth right on top of the tank like that so immediately changed the drip tip to a taller 810 tip. As you can see in the picture below, the Profile X is easily broken down for cleaning or changing out the pre-installed straight 5ml glass for the 8ml bubble glass.

The top cap uses the normal ¼ turn bayonet style connection. I personally found the top cap a little bit thin and not the easiest to get a grip on but had no real troubles with it. There is a single o ring on the bottom of the top cap to help seal the tank from leaking. One thing I thought that was odd at first is how deep the fill ports are down inside of the opening once the top cap is removed. I tried to get a picture for you in the second one below but don’t know how good it is at showing how far down the fill ports are. From what I have read, this is so that you can use any type of bottle for filling including a glass dropper bottle without making a mess. I found it odd when filling with my usual 50ml plastic bottles.

I don’t think I’ve seen a build deck quite like the one in this rta. It not only has two screws with one on each side to lock down the mesh strips but also has two other screws on each side that allow you to install two standard coils and lock down each leg individually. So there are the two clamps with the ceramic spring loaded center that pushes the cotton against the mesh and also four holes with individual screws to install standard coils. Unfortunately the clamps for the mesh are not spring loaded.

The airflow for the Profile X consists of two rows of nine honeycomb holes on each side for a total of 36 airflow holes available. This is easily adjusted with the airflow control ring that moves with just the right amount of resistance.

I’ll be honest that I’ve never really been a big fan of mesh coils so was a little apprehensive starting out about testing this one. My first build was with the .15 mesh strip in one of the two tanks that I received for the review. I bent and installed the mesh and used one of the included cotton threads to wick the tank. I cut the wick down at an angle from the top edge near the mesh to the end of the wick. Then thinned out the tails quite a bit but still had plenty of cotton to fill the ports. Upon initially trying the tank, I kept getting a strong cotton taste no matter where I set the wattage. I finally pulled the deck out and raised the shoulders of the wick some thus pulling the tails up a little and that seemed to help some. I settled around 55 watts but felt like I never really got rid of the cotton taste completely. It wasn’t a dry hit, but just the taste of cotton. I checked a couple times and my wick was fully saturated.

The second tank I decided to install the two Ni80 coils. I made the mistake of cutting the legs at 5.5mm and never could get both coils installed properly. I gave up on those and installed a couple of the 316 flat braided coils that I keep on hand. This time I cut the legs longer at 6.5mm and it was a little easier. The next time I install dual coils in this tank I will cut them at 7 or 7.5mm to make them a little easier to work with. The flavor was much better and did not get the cotton taste like I did on the first mesh attempt. My dual coils ended up at .15 ohms and have been running them at 58 watts on a DNA mod with good results.

I still had two more mesh strips to test so decided to put one in each of the tanks. I honestly was kind of dreading this after my initial results with the first mesh strip test. I went ahead and built each of the two sample tanks with a different mesh strip. The Turbo strip went in one tank in one tank with a dinner lady lemon tart mix while the Extreme went in the other with a lemon pound cake recipe that I use very often for review testing. I trimmed the wicks down at an angle like I did the first time but this time thinned the tails out quite a bit more and trimmed the tails a little more so that I had less cotton going into the wick holes. This proved to provide better flavor than my initial test and no cotton flavor like I got before. With this in mind, I can only think that my first attempt at a mesh coil with this tank resulted in less than optimal results because I didn’t thin the tails out enough. Even if you think you have the tails thinned enough, go ahead and thin them out more.

FINAL THOUGHTS:

I feel like Wotofo has done a good job coming out with yet another good rta. Having the option of running mesh as well as single or dual standard coils makes it very versatile and should meet the needs of many vapers. Starting out with a 5ml capacity and being able to increase it to 8ml with the use of the included bubble glass is definitely a plus with a tank like this targeted at high wattage use.

I was unable to use any of the mesh coils at the rated wattages with any comfort. I felt like the second two mesh coils operated well at the 45-50 watt range. It definitely helped to thin the tails out more with these two than I did with the first test with the Chill mesh strip. The dual standard coils were a little hard to install and felt like the four grub screws didn’t have very good heads on them and were a little difficult to tighten without feeling like I was stripping the heads with the included screwdriver. I had better results using my own precision screwdriver.

Overall I feel like Wotofo has done a nice job designing as well as executing the manufacture of the Profile X RTA. If you like high wattage vaping and having the versatility of being able to use both types of coils then this one might be a good fit for you.

I would like to thank Wotofo and Cara for sending the Wotofo Profile X RTA for this review. Thanks as always to the readers for making it to the end of another review in a long line. Below is a link to the website for you.

Profile X RTA - The latest flavorful single mesh RTA by Wotofo

Jma e liquid all 3 mg steeped for 2 weeks £80 postage included