The Vaporesso Xtra is a new pod device from the folks at Vaporesso. At a time when the pod market is way too oversaturated, is releasing another pod on the market a wise choice? Let's find out...

═╣ Vaporesso Xtra ╠═

00:05 ◄ Intro, specs and close look
05:56 ◄ Vape
06:44 ◄ Thoughts

Login to view embedded media

I have heard good things about this community and I decided I wanted to be a part of it. I have been vaping for a little over five years. I started off with little vape pens, then moved to the Innokin Endura, and for the last 3 years I have been utilizing higher wattage sub-ohm setups. However, recently I have really had a desire to get back into a lower wattage and MTL style vaping. But after years of using 3mg nic with 60 - 70 watts, I am a little unsure of how to proceed with the all of the new lower wattage options out there. Also, I have recently become interested in trying DIY eliquid and maybe even getting into rebuildables.

Anyways, while I have been vaping for quite some time, I would hardly call myself an expert. This is one reason I decided to join up. I figured this would be a good place to acquire some knowledge, ask questions, and gather opinions from from a group of people who knows their stuff.

I am going to conclude my introduction now because it is 5 in the morning and I am pretty sure I am just rambling on in a sleepy haze at this point. Thanks for reading and looking forward to being a part of this community.

Hi,

New here. A parcel with a replacement tank was intercepted. In the same parcel was also some unrelated stuff.

What can I expect now?

Will I receive a fine? If so how much?
S$ 2000 or 10000? Or just a warning?

Will I need to go pick up the parcel?
Will I get a visit at my place?

I hear this happens a lot but I see very little users sharing their experiences.

Hi ECF!

Hope you and your loved ones are all doing well and stay safe over there!
Today is May 30, the WORLD VAPE DAY! Let's Let's get involved & support the effort and join @CASAA in the fight!
"We are encouraging vapers and supporters of THR worldwide to join us on social media to celebrate World Vape Day and our right to use smoke-free alternatives. Now is the time to share how vaping saves lives and to explain why vaping is such an incredibly empowering alternative to the “quit or die” tobacco control mentality. May 30 is our day, and our voice will not be silenced!''

To make the day, we are giving away 3pcs * Kroma-R Mod & Ares II RTA Tank as a kit together!



Innokin Kroma-R-- Leading Edge!
The Kroma-R is great for big cloud DTL vaping with the Ajax tank or enjoy intense MTL flavors with the full line of Z-coils and Platform series tanks.
Compact, stylish and sleek, the Kroma-R is crafted with premium quality materials. Featuring an ergonomic design with textured grip, the Kroma-R fits perfectly into your hand. Enjoy great vaping with Wattage (6 – 80W) and Voltage (1 – 7.5V) outputs and Soft, Normal and Boost Modes. Ultra-fast with a .003s response time! The Kroma-R top-quality fire button is satisfying to click and integrated into the bright OLED screen.
All important information is clearly displayed on screen including battery charge, wattage/voltage, coil resistance, puff count, voltage out and wattage lock.


THE ARES II – IMPROVED FOR YOUR VAPING SATISFACTION!
As we did with the Zenith, we listen to your feedback and made several improvements on the ARES II based on your requests.
· We’ve improved the top cap and seals to prevent liquid and air seepage.
· We’ve given you the ability to remove the top cap and replace the silicone top fill seal should you need to.
· We’ve improved the bottom seals and added a .8mm airhole allowing for a tighter mouth to lung selection.
· We’ve added detents to the bottom airflow selector to allow for easier and more accurate settings.
The ARES has always been an atomizer about balance; balance between features, ease of use, and vape quality.
We hope you enjoy the improvement to the ARES II and hope you love it as much as we do!



Easy to enter:
(1) Visit the Kroma-R product page for more information about it and additional graphics and photos.
(2) Visit the ARES II product page for more information about it and additional graphics and photos.
(3) Post in this thread and Let us know your thoughts on the KromaR and Ares 2.
(4) If you win, We want to hear your feedback and thoughts and there will be additional chances for winners to win something extra special.

PS: Please let your friends on ECF know about this giveaway. Thank you very much!
If you don't know about WORLD VAPE DAY, click the link to get involved. Give them a look and sign up to help!

Note:
• You must be 18 years or older to enter.
• Global giveaway- anyone can win. (However, due to local regulations and/or logistics issues, we may not able to send you the prize. We will then discuss solution on a case by case basis.
• Only one post per person, please! Multiple posts will not increase your chances of winning. Please just post once so I don't have to keep track of multiple posts when selecting the random winner. One post per person please!
• Winners will be announced here on ECF on June 6th. You have 7 days to contact me or your prize will be forfeit and given away in the next giveaway. If you can invite a friend to join the ECF-Innokin forum and join in the giveaway then that would be great, but it is not required to enter and win.

*American winners must also be willing to provide Innokin with a small fee via PayPal to receive their prize. The FDA requires a fee for any vaping product in the USA. We've set the coupon cost at the lowest limit that our attorneys have advised is possible.
• Winners will be selected randomly from all eligible entries.

Good luck and thank you very much for joining!
Hope you have a great weekend and take care of each other.

This thread is for the general discussion of the Pod Vape Freemax Autopod50 Pod Mod Kit. Please add to the discussion here.

The VOOPOO Drag X Mod Pod Kit featuring a single high-amp 18650 battery, compatibility with the PnP Coil Series & RBA, and possesses a GENE.TT Chipset to regulate and grant functionality, the Drag X is the heir to the legendary VOOPOO Drag line. Operating between the wattages of 5-80W, the Drag X Pod Mod Kit can work with nearly any PnP Coil falling in the range of 0.1-3.0ohm resistance.



More Voopoo new products information,just visit this link: Voopoo Vape

Hello, Freemaxers! Do you like the vape device ranging from 15 watts to 50 watts? I believe this kind of vape device is the largest population of vapers’ choice. In order to meet many vapers’ need, Freemax vape hardware manufacturer has released world’s first double mesh coil pod mod kit - Freemax Autopod50 with everything you need for vaping between 15 watts to 50 watts.



Good news also shared with you! Do you want to get one Freemax Autopod50 for free? Here comes the chance! Now you can not only join the giveaway on Freemax vape website online, but also on Freemax official Facebook, Instagram and Twitter channel.

Enter Freemax website to join>>GET FREE AUTOPOD50
Enter Freemax Facebook to join>>Freemaxvape
Enter Freemax Instagram to join>>Login • Instagram
Enter Freemax Twitter to join>>FreeMaxVape (@Freemaxvape) | Twitter

Looking for 2 post Kennedy RDA and Hexohm v3.

Autopod50 Pod Mod Kit by Freemax is newly released today, so what do you think of this pod mod kit at your first sight? Just love its appearance? As for me, Freemax Autopod50 not only has its charming appearance, but also has the high performance. This vape kit is able to provide you with the best vaping experience which is even better than the best sub ohm tanks in the market.

If you want to know more details about Freemax Autopod50 kit, please watch the video on this Autopod50 below:
Login to view embedded media
There are four highlight features of Freemax Autopod50 you will know:
1.Freemax Autopod50 Kit is World's First Double Mesh Coil Pod Mod Kit
2.FreeMax COILTECH 4.0: AX2 Mesh Coil 0.25ohm & AX2 Mesh Coil 0.5ohm
3.Real 2000mAh Inner Battery, Type C USB Port, and 2A Fast Charging
4.30-40 Times of Refills for Each AX2 Mesh Coil

Don't forget to participate in Freemax Big Giveaway to win Freemax Autopod50 on Freemax vape website online.

I found and purchased what I later found to be a 'Vape Pen' at an estate sale. Not being familiar with this vice I commenced disassembling it to determine what made it tick.
I have determined that it consists of (starting at the bottom and progressing upward) a spring loaded push-button switch sporting a logo denoting it as a product by Atmomixani. It is threaded into a tube consisting of two pieces threaded together. One of them bears a logo and lettering that says 'Nemesis' and the number 6342. When I got this pen this tube contained a battery. I examined it and determined that it wasn't leaking and disposed of it (I don't like to guess with second hand batteries ).
Next is what I believe to be a re-build-able atomizing deck with a logo and the name Svoemesto. It will apparently disassemble into many smaller components to facilitate rebuilding. The top of it reminds me of the 'Tin Man's' hat from the 'Wizard of Oz'.
The next section is another tube with a diameter that is quite similar to the battery tube but is only about three quarters of an inch long. I assume this to be a vapor chamber as it was quite oily.
Topping the device is a perforated cap for the chamber that reduces the diameter to accommodate the removable mouthpiece.
All of these components are non-magnetic (no glass parts) and I assume them to be stainless steel.
The battery tube with the 'Nemesis' markings has some tool-marks that imply that the previous owner had some frustration issues. All other surfaces show wear and scratches and all of the various o-rings would warrant immediate replacement if I was going to put this device to use.
With all of this in mind I have no use for this device and will be happy to sell it to someone who is interested in it but I don't know how to find someone who is interested in it.
Can you educate me? Any help will be appreciated.

Aegis Max offers the color options,
Check it out: Aegis Max
--

Salute to Aegis 100W
IP67 waterproof/ dust-proof / shockproof;
Removable battery compartment-interchangeable battery size of 21700 & 18650;
Sper fast Firing with less than 0.02s; Four times faster than other Aegis Mods;

Hi, guys! Welcome to New Product Introduction! I have a question: do you need a Pod Kit at present? Today let me introduce you one pod kit named Original FreeMax Autopod50 VW Pod Mod Kit. Now let’s take a closer look at the pod kit below.

The Autopod50 VW Box Mod Pod System Vape Starter Kit is the World's First Double Mesh Coil Mod Pod Kit with everything you need for vaping between 15W to 50W. Autopod50 Mod Pod Kit utilizes quality material for comfortable hand feeling and durability. Autopod50 is powered by a 2000mAh built-in battery with Max Output 50W, it comes with a 4ml pod cartridge and two types of coils for options: 0.25ohm AX2 Mesh Coil (30~50W) and 0.5ohm AX2 Mesh Coil (15~35W), all of which can bring you long-lasting vaping experience. As it is famous for the lastest COILTECH 4.0 with military grade SS904L mesh and Tea Fiber Cotton formala, it is able to provide best vaping experience even better than the best sub ohm tanks in the market. According to multiple testing results, the AX2 Mesh Coil has an average life span of 30~40 refillings. What's more, with Type-C 2A fast charging function, it only takes 80 minutes to be fully charged. And it allows you to get vaping details via a screen.



Main Features:
4ml big pod cartridge
2000mAh internal battery with Type-C 2A fast charging
Adjustable wattage from 5W to 50W
Adopts the COILTECH 4.0
Two types of coil: Autopod50 AX2 Mesh Coil 0.25ohm and 0.5ohm
Equipped with military grade SS904L mesh and Tea Fiber Cotton formala
30~40 refilling times for each AX2 Mesh Coil
Designed with a screen to show vaping details

If you want to get one, you can come here:
Original FreeMax Autopod50 VW Pod Mod Kit >>>

Vaping accessories you would like:
3FVAPE - Wick, Wire, Mesh >>>
3FVAPE - Cotton >>>

More Original FreeMax products are available:
3FVAPE - Original FreeMax >>>
-------------------
3% OFF for No Tobacco Day
Time: 29th May 00:00 - 31st May 2020 23:59 (UTC-6 / Denver Time)
Coupon code：3FVAPE2020
Note: This offer is not stackable with other MAP discounts.

Hi, guys! Welcome to New Product Introduction! I have a question: do you need a RDTA at present? Today let me introduce you one RDTA named YFTK ParavozZ Ghost V2 RDTA Clone. Now let’s take a closer look at the RDTA below.

The YFTK ParavozZ Ghost V2 RDTA Clone is constructed from Titanium Alloy material in 22mm diameter. The RDTA comes with a PEI tank tube. The building deck supports single coil. Heat sinks in the top cap is good for better cooling.



Parameters:
Material: Titanium Alloy
Product Type: Rebuildable Atomizer
Coil Rebuildable: Coil Rebuildable
Drip Tip: With Drip Tip
Thread Type: 510
Tank material: PEI
Coil Replaceable: Non-Replaceable Coil
Package: 1 x RDTA, 1 x Pack of Accessories

If you want to get one, you can come here:
YFTK ParavozZ Ghost V2 RDTA Clone - Titanium Alloy >>>

316 Stainless Steel Version:
YFTK ParavozZ Ghost V2 RDTA Clone - 316 Stainless Steel >>>

Replacement Tank:
YFTK Replacement Tank Tube for ParavozZ Ghost V2 RDTA >>>

Mechanical Mod maybe you like:
3FVAPE - Mechanical Mod >>>

Vaping accessories you would like:
3FVAPE - Wick, Wire, Mesh >>>
3FVAPE - Cotton >>>
-------------------
3% OFF for No Tobacco Day
Time: 29th May 00:00 - 31st May 2020 23:59 (UTC-6 / Denver Time)
Coupon code：3FVAPE2020
Note: This offer is not stackable with other MAP discounts.

A brand new version of vision spinner 2 has been arrived !!! More stable output current and faster heating, providing a constant flow of power for your tank.

Hello, Freemaxers! Good news! Freemax Autopod50 Pod Mod Kit has been officially launched on 30th, May, which is world’s first double mesh coil pod mod kit. It utilizes FreeMax COILTECH 4.0 with AX2 Mesh Coil 0.25ohm and AX2 Mesh Coil 0.5ohm available. Powered by real 2000mAh inner battery, it can support 2A Fast Charging by Type C. What’s more, the AX2 Mesh Coil has an average life span of 30-40 refill.

What’s more, Freemax brings you a big vape giveaway on Freemax official vape site. 10 winners will be chosen to get the Freemax Autopod50 for free. The activity time is from 30th, May to 5th, June. That’s to say, there are only seven days available to join in this contest.

Please click here directly to enter this giveaway>> GET FREE AUTOPOD50.

Product introduction
Lcovape 98K RDA, constructed from 316 stainless steel material, is a 24.5mm RDA. Its gold plated build deck features single large post design and post-less negative terminal, which allows you to build horizontal or vertical coils. The spring loaded clamp design makes building easier. The air enters the dual side air slots and hit the coils directly.

Parameters:
Size: 24.5x 37.5mm
PEEK insulator
510 threading connection
316 stainless steel construction

Features:
Gold plated build deck
Single post design
Spring loaded clamp design
Post-less negative terminals
Side airflow system
PEI insert between 810 drip tip and top cap
Copper contact pin
Comes with bottom feeder pi

Package includes:
1x Lcovape 98K BF RDA
1x Allen Key
1x BF Pin
1x Positive Post Screw
1x Spring
2x Hex Screws
3x O-rings

I've been searching for a wider assortment of zero nic flavors for e-liquid but all I could find from Shopee and Lazada are Dr. Zero liquids, I try searching on Facebook for shops but none of them carry any 0mg liquid. Hope anyone could give me tips, ideally I'm looking for a cola flavor but if that's not possible then I'll see what they can offer flavor-wise.

Freemax Autopod50 Pod Mod Kit

Autopod50 Kit is the World's First Double Mesh Coil Pod Mod Kit with everything you need for vaping between 15W to 50W. With 6 colors for your option, it also utilizes quality material for comfortable hand feeling and durability. It is composed of a 2000mAh mod and a 4ml pod cartridge, both of which can bring you long-lasting vaping experience. As it is famous for the lastest COILTECH 4.0 with military grade SS904L mesh and Tea Fiber Cotton formala, it is able to provide best vaping experience even better than the best sub ohm tanks in the market. And there are two types of coils available: one is Autopod50 AX2 Mesh Coil 0.25ohm for 30-50W, and the other is Autopod50 AX2 Mesh Coil 0.5ohm for 15-35W. Besides, according to multiple testing results, the AX2 Mesh Coil has an average life span of 30-40 refillings. What's more, with Type-C 2A fast charging function, it only take 80 minutes to be fully charged. And it allows you to get vaping details via a screen. What a cost-effective pod mod kit it is. Just get one to start a brand-new vaping experience.



Details:

1. 4ml big pod cartridge
2. 2000mAh internal battery with Type-C 2A fast charging
3. Adjustable wattage from 5W to 50W
4. Adopts the COILTECH 4.0
5. Two types of coil: Autopod50 AX2 Mesh Coil 0.25ohm and 0.5ohm
6. Equipped with military grade SS904L mesh and Tea Fiber Cotton formala
7. 30-40 refilling times for each AX2 Mesh Coil
8. Designed with a screen to show vaping details







NS Mesh Coil for Maxpod Kit

Maxpod Replacement Coil is compatible with Freemax Maxpod Kit. It comes with NS 1.0ohm Mesh Coil and NS 1.5ohm Mesh Coil. 1.0ohm Coil is created for flavor and vapor. NS Mesh Coil is created for nicotine intake and throat hit. May it provide you nice vaping enjoyment. 5pcs each pack.


Details:

1. Equipped with FM SaltCoilTech 2.0
2. For both nic salt and freebase e-liquid







Autopod50 Pod Cartridge

Autopod50 Pod Cartridge is specially designed for Freemax Autopod50 Pod Mod Kit. And there are 2 types pod available: Autopod50 Pod Cartridge with AX2 Mesh Coil 0.25ohm/0.5ohm. As it is famous for the lastest COILTECH 4.0 with military grade SS904L mesh and Tea Fiber Cotton formala, it is able to provide best vaping experience even better than the best sub ohm tanks in the market. And based on multiple testing results, the AX2 Mesh Coil has an average life span of 30-40 refillings. Moreover, it adopts 4ml large e-juice capacity design that will greatly reduce the refilling times. And one pod cartridge in each pack. Just get one to have an excellent journey.


Parameters:

Pod Capacity: 4ml
Coil Resistance: 0.25ohm(30-50W, best 40W)/0.5ohm(15-35W, best 30W)
Fit for: Autopod50 Mod Pod Kit
Quantity: 1pc/pack







Autopod50 AX2 Mesh Coil

Autopod50 Mesh Coil is specially created for Freemax Autopod50 Pod Mod Kit. Upgraded from world-known M Pro and Fireluke series, it is known as the lastest COILTECH 4.0 with military grade SS904L mesh and Tea Fiber Cotton formala that is able to provide best vaping experience even better than the best sub ohm tanks in the market. And there are two types of coils available: one is Autopod50 AX2 Mesh Coil 0.25ohm for 30-50W, and the other is Autopod50 AX2 Mesh Coil 0.5ohm for 15-35W. Moreover, based on testing results, the AX2 Mesh Coil has an average life span of 30-40 refillings. There are 5 coils in each pack. It is really worthy to get one.


Parameters:

Coil Type: AX2 Mesh Coil
Coil Resistance: 0.25ohm(30-50W, best 40W) / 0.5ohm(15-35W, best 30W)
Fit for: Freemax Autopod50 Kit
Quantity: 5pcs/pack

The Vaporesso Target PM80 SE Kit is the updated version of the Target PM80 kit, it has a slender design and a greater choice of Coil GTX, for the pleasure of do-it-yourself it is also available available separately from the GTX RBA base.
In this New Mod the power supply is provided by a single 18650 battery capable of pushing it up to 80W of maximum power, for management we find the AXON chip with the Smart VW mode (can be disabled) able to choose the best wattage for each GTX coil inserted .

Enjoy the reading.

The packaging of the PM80 SE:

In the front we find the Vaporesso Target PM80 SE device in the foreground.
On the opposite side are the specifications, the content, the scratch and check, the batch number and the inevitable logos / brands.



On the remaining sides some main characteristics of the AXON chip are remembered, the address of the manufacturer and the place of origin of the product.

When opening the cardboard package for the first time, the kit looks like this.



Package contents:

1- Target PM80 SE
2- Target Pod (4ml)
1- Mesh-Coil GTX 0.2Ω
1- Mesh-Coil GTX 0.6Ω (New)
1- USB cable
1- User manual
1- Certificate of guarantee
1- Warning card
4- Silicone plugs to divide the airflow



Specifications and Dimensions :

Dimensions: 121.3x33.8x24.8mm
Pod capacity: 4ml
Battery: 18650 (not included)
Output power: 5-80W
Charging current: 2A, Micro-USB
Screen: 0.91 "OLED
Resistors: GTX 0.2Ω MESH COIL (45–60 W); GTX 0.6Ω MESH COIL (20-30W)
Advanced AXON chip with 0.001 second insta-fire
Air flow adjustable with two silicone caps
Intelligent VW mode with recommendation of the right power for the coil
Multiple protections
90 day guarantee period



Available colours:



How it is made:

The front view of the PM80 SE highlights a vertically arranged rectangular Fire switch integrated in the 0.91 "LCD screen. The Up / Down keys are always positioned vertically at the bottom.

The opposite side to the front houses the plastic insert (carbon Look mine) very pleasant and soft to the touch and the Vaporesso logo at the bottom.



On the side, the shiny metal part and the white lettering create a nice contrast with the decorative insert, the other side reflects the previous one and at the bottom houses the micro USB charging socket.



One of the two opposite slots can be seen at the top for the air-flow which can be partialized with the grommets supplied in the Kit.
Attention: the rubbers have their own direction of insertion otherwise it will be easy to lose them.



The pod housing obtained on the battery offers a good fit, has two magnets and 2 contact pins.

The lower part of the device bears the C E mark, the disposal logo, a series of vent holes arranged in two parallel rows and an indication of the origin of the product.

The door to access the battery compartment adopts a valid sliding opening and an equally valid and safe closing, the insertion direction for the 18650 cell is well marked.

Hi all
I have just started to get in to building and bought a gear rta i have put a 3mm coil in and bought a pack of muji cotton the problem i am stuck with is i dont no how wide to cut the cotton i have asked but keep getting diffrent iinformation some one told me to cut 12mm then 10mm whould any body help us out it would be well appreciated

Hello I'm Van I Vaped a CPL years using a smoke stick went back to dipping..bought an Aegis mini about 4 months back and seriously outgrown it.... I'm maxed out on watts and having to charge it constantly...I'm thinking a legend 200w box but not sure if I need a rta or rda..and I need a larger tank...I vape a 6 nic and mainly Johnny's Juices which has no sweeteners....I want a deep smooth flavor any advice is more than needed.TY

As the AIO market trundles on we are seeing a few companies trying to do a different soon on the looks of their AIO. The SMOK ALike is kind of SMOK's answer to the Aegies Pod/AIO from Geek Vape. The SMOK ALike is a rather rugged (and heavy for its size) AIO kit.

═╣ SMOK ALike ╠═

00:05 ◄ Intro, specs and close look
07:49 ◄ Vape
08:49 ◄ Thoughts

Login to view embedded media

I'm looking for an inexpensive Geekvape zeus subohm tank. The tank I had kept cutting through the gasket or Oring. I've given up on them but I'm hoping someone owned one that they'll sell cheap. If you have one (any color) that you're willing to part with pls pm me. Thanks y'all.
I'm also looking for a Vaporesso Skrr Tank. I stepped on mine and it didn't survive. I can't afford the retail price for either tank but maybe able to get close if the price is under retail. Thanks again!

asMODus Lustro 200W Gunmetal Relic Edition Stabilized Wood Box Mod


Like New condition. I’ve only used it to make sure it worked. Asmodus has them on sale for $199.00.

I’ll let this go including priority shipping within 5 days for $125.

Any questions please ask.