Hello fellow vapers.

Time to take a look at the Vandy Vape Jackaroo Mini 128W Kit which was sent to me by my friends over at Sourcemore for the purposes of the review.
I am a big fan of the Jackaroo model from Vandy Vape,used the Vandy Vape Jackaroo (single none built in battey) for a long time.
Unfortunately i dropped it while i was changing the battery so the battery cap wasn't on and it fell just at the exact angle that it deformed the battery entry point.
Soo...i had to retire it and put it back in the box.
But i gotta say that was one tough mod,loved the weight and the grippy rubbery feel it had.

Ok enough of my old Jackaroo,time to take a look at the new kit,first of all some nice images with all the info about said kit.

CONTENTS IN THE PACKAGE:



SPECIFICATIONS:



SAFETY PROTECTIONS:



VANDY VAPE CHIP FUNCTIONS:



EASY REFILL METHOD:



COLOR CHOICES:



Features:
1. Waterproof, shockproof, dustproof
2. 4000mAh cell equal to dual 18650 batteries
3. Ergonomic and small for comfortable holding
4. Powered by an upgraded Vandy Chip with max power 128W
5. Power/Bypass/Voltage/TC-NI/TC-SS/TC-TI mode
6. Adopts 0.15ohm triple meshed coil
7. Compatible with VVC Coils
8. Easy coil replacement, top filling design
9. Safety protections: Short Circuit/Open Circuit/Over-heating/10S Cut-off/Low Battery Warning/Overcurrent Protection

Jackaroo Mini Button Combinations:
Turn the Jackaroo Mini On or Off: Press the fire button 5 times.
Change Modes: Press the fire button 3 times and then use the adjustment buttons to select your mode. Press the fire button to confirm your mode.
Adjust settings in your current mode (such as wattage in TC mode): Press the fire button 4 times.
Enter the Menu: Hold the up and down adjustment buttons.
Lock the mod: Hold the + adjustment button and fire button together.
Flip the Screen: Hold the – adjustment button and fire button together.
Stealth Mode: Hold both adjustment buttons and the fire button together


UNBOXING AND FIRST IMPRESSIONS:

I am a sucker for the single battery Jackaroo,used it as my main vaping device for a long time so i was eager to unbox this beauty.

As of late and due to the early death of my single battery Jackaroo (user fault,i am clumsy) i have never been that happy when using vaping mods with metal casing.

Now the Jackaroo? WOW!! I just love the grip,love the way it feels in my hands and even thou it is a tad heavier it just feels right.

Dimensions are a bit smaller than the single battery model but it still packs some weight,but the grip is good and it just feels like it was designed to fit nicely in your hand.

Truth be told when it comes to the ''rugged'' style of mods i have only tried the Jackaroos, always wanted to try out an Aegis so i could compare it but i haven't had the chance.
Did review the GeekVape Aegis Nano Kit but compared to the Jackaroo the Aegis Nano kit looks like a keychain

The atomizer well when it comes to looks it is not really a head turner but that is just a personal issue,some don't care about looks but just the performance.
Quality wise well i don't know it just feels a bit flimsy,even thou the top cap refill system is cool but i can only wonder how long will it last...time can only tell.

VAPING TIME:

Time to charge the mod,get the atomizer primed and ready and give this kit a try.
Seems the mod came already with some charge in it since it took barely 30 minutes to get it charged (type C charging,meh i am not a fan).

Just so you can get an idea of how long the battery can last,well i used it all day at 30 watts with the VVC-30/0.30ohm(30w to 45w) and i got 396 puffs before the battery indicators went from green to red.

I probably could have got more puffs out of the mod at that time but i didn't want to completely drain the battery.

I usually vape with 0.22 to 0.30 coils at a wattage of 28 to 40 watts,depends a lot on the atomizer itself.

With this tank and using the VVC-30/0.30ohm coil i vaped at around 28/30 watts.
Flavor wise i liked it,plenty of flavor but a bit airy for my taste...did try to fiddle around with the airflow ring but i couldn't find my sweet point.
That could have been more of personal issue than a fault with the tank itself,flavor was there but the hit i wanted? nope,just couldn't get it.

Been using the same mod/tank for 2 days and i have had no problems with it,coil gives the same flavor as the first day.

Mod has an easy menu to use and the filling of the pod couldn't be simpler.
Press on the button of the side of the tank and the top flips open,insert your bottle in,fill the tank then just push cap all the way down until you hear a click.

Although i have to say that when you refill and if you're using a big 120ml bottle like i do you might have to hold the bottle slightly inclined since if you hold it vertically when filling the tank it get stuck with the top cap.

After a day of full use i grabbed the top of the tank and detached it from the base just to check if there was some condensation.
Amount of condensation was minimal,would suggest that every 3 or 4 tanks you fill you just use a paper towel or cloth to remove some of the condensation so it doesn't build up.

I did want to try out the VVC 15 (35w to 60w) coil but my allergies went into overdrive and with all my senses messed up i wouldn't have been able to give it a proper test.

PROS

-Love the design
-Fits nicely in the hand
-Very rugged mod that can take a beating
-Good build quality
-Bright screen and good UI

CONS

-Build quality of the atomizer? Not a fan,feels a bit flimsy
-Even thou the fill system of the atomizer is easy to use the build quality makes me doubt it will last a long time
-TC mode (even thou i don't use it) is still one of the Achilles heels of this chip
-Micro-USB charging

WOULD I RECOMMEND THIS DEVICE:

This is a 50/50 answer.
The mod? yes of course it is a well built mod that will last you for a long time.
The atomizer well i am not sure,even thou i do get good flavor from it but the top cap doesn't seem that it will last long and the airflow well it was impossible for me to find the sweet spot.
Just felt a tad to airy for my taste but as like with everything in life this is just my personal taste and it possibly is different from everyone else.

All in all this is one very good kit that can cover all your vaping needs.

Thanks again to all my friends at Sourcemore for giving me the opportunity to review this device.

Thanks for reading.

Hello fellow vapers.

Time to take a look at the Vandy Vape Jackaroo Mini 128W Kit which was sent to me by my friends over at Sourcemore for the purposes of the review.
I am a big fan of the Jackaroo model from Vandy Vape,used the Vandy Vape Jackaroo (single none built in battey) for a long time.
Unfortunately i dropped it while i was changing the battery so the battery cap wasn't on and it fell just at the exact angle that it deformed the battery entry point.
Soo...i had to retire it and put it back in the box.
But i gotta say that was one tough mod,loved the weight and the grippy rubbery feel it had.

Ok enough of my old Jackaroo,time to take a look at the new kit,first of all some nice images with all the info about said kit.

CONTENTS IN THE PACKAGE:


SPECIFICATIONS:


SAFETY PROTECTIONS:



VANDY VAPE CHIP FUNCTIONS:


EASY REFILL METHOD:



COLOR CHOICES:



Features:
1. Waterproof, shockproof, dustproof
2. 4000mAh cell equal to dual 18650 batteries
3. Ergonomic and small for comfortable holding
4. Powered by an upgraded Vandy Chip with max power 128W
5. Power/Bypass/Voltage/TC-NI/TC-SS/TC-TI mode
6. Adopts 0.15ohm triple meshed coil
7. Compatible with VVC Coils
8. Easy coil replacement, top filling design
9. Safety protections: Short Circuit/Open Circuit/Over-heating/10S Cut-off/Low Battery Warning/Overcurrent Protection

Jackaroo Mini Button Combinations:
Turn the Jackaroo Mini On or Off: Press the fire button 5 times.
Change Modes: Press the fire button 3 times and then use the adjustment buttons to select your mode. Press the fire button to confirm your mode.
Adjust settings in your current mode (such as wattage in TC mode): Press the fire button 4 times.
Enter the Menu: Hold the up and down adjustment buttons.
Lock the mod: Hold the + adjustment button and fire button together.
Flip the Screen: Hold the – adjustment button and fire button together.
Stealth Mode: Hold both adjustment buttons and the fire button together


UNBOXING AND FIRST IMPRESSIONS:

I am a sucker for the single battery Jackaroo,used it as my main vaping device for a long time so i was eager to unbox this beauty.

As of late and due to the early death of my single battery Jackaroo (user fault,i am clumsy) i have never been that happy when using vaping mods with metal casing.

Now the Jackaroo? WOW!! I just love the grip,love the way it feels in my hands and even thou it is a tad heavier it just feels right.

Dimensions are a bit smaller than the single battery model but it still packs some weight,but the grip is good and it just feels like it was designed to fit nicely in your hand.

Truth be told when it comes to the ''rugged'' style of mods i have only tried the Jackaroos, always wanted to try out an Aegis so i could compare it but i haven't had the chance.
Did review the GeekVape Aegis Nano Kit but compared to the Jackaroo the Aegis Nano kit looks like a keychain

The atomizer well when it comes to looks it is not really a head turner but that is just a personal issue,some don't care about looks but just the performance.
Quality wise well i don't know it just feels a bit flimsy,even thou the top cap refill system is cool but i can only wonder how long will it last...time can only tell.

VAPING TIME:

Time to charge the mod,get the atomizer primed and ready and give this kit a try.
Seems the mod came already with some charge in it since it took barely 30 minutes to get it charged (type C charging,meh i am not a fan).

Just so you can get an idea of how long the battery can last,well i used it all day at 30 watts with the VVC-30/0.30ohm(30w to 45w) and i got 396 puffs before the battery indicators went from green to red.

I probably could have got more puffs out of the mod at that time but i didn't want to completely drain the battery.

I usually vape with 0.22 to 0.30 coils at a wattage of 28 to 40 watts,depends a lot on the atomizer itself.

With this tank and using the VVC-30/0.30ohm coil i vaped at around 28/30 watts.
Flavor wise i liked it,plenty of flavor but a bit airy for my taste...did try to fiddle around with the airflow ring but i couldn't find my sweet point.
That could have been more of personal issue than a fault with the tank itself,flavor was there but the hit i wanted? nope,just couldn't get it.

Been using the same mod/tank for 2 days and i have had no problems with it,coil gives the same flavor as the first day.

Mod has an easy menu to use and the filling of the pod couldn't be simpler.
Press on the button of the side of the tank and the top flips open,insert your bottle in,fill the tank then just push cap all the way down until you hear a click.

Although i have to say that when you refill and if you're using a big 120ml bottle like i do you might have to hold the bottle slightly inclined since if you hold it vertically when filling the tank it get stuck with the top cap.

After a day of full use i grabbed the top of the tank and detached it from the base just to check if there was some condensation.
Amount of condensation was minimal,would suggest that every 3 or 4 tanks you fill you just use a paper towel or cloth to remove some of the condensation so it doesn't build up.

I did want to try out the VVC 15 (35w to 60w) coil but my allergies went into overdrive and with all my senses messed up i wouldn't have been able to give it a proper test.

PROS

-Love the design
-Fits nicely in the hand
-Very rugged mod that can take a beating
-Good build quality
-Bright screen and good UI

CONS

-Build quality of the atomizer? Not a fan,feels a bit flimsy
-Even thou the fill system of the atomizer is easy to use the build quality makes me doubt it will last a long time
-TC mode (even thou i don't use it) is still one of the Achilles heels of this chip
-Micro-USB charging

WOULD I RECOMMEND THIS DEVICE:

This is a 50/50 answer.
The mod? yes of course it is a well built mod that will last you for a long time.
The atomizer well i am not sure,even thou i do get good flavor from it but the top cap doesn't seem that it will last long and the airflow well it was impossible for me to find the sweet spot.
Just felt a tad to airy for my taste but as like with everything in life this is just my personal taste and it possibly is different from everyone else.

All in all this is one very good kit that can cover all your vaping needs.

Thanks again to all my friends at Sourcemore for giving me the opportunity to review this device.
As usual here you have a code in case you decide to acquire this kit:

$47.23 - Vandy Vape Jackaroo Mini Kit
Code: JMIK

Thanks for reading.

Hi, i’m new here and have little question about my new vape. I bought a wenax k1 and have a problem with a pod. I refilled it but when i wanted to vape, the red light flickers. I tried it with another pod and it worked. Would my first pod be broken? I only used it for 2 weeks and it worked perfect. (Sorry for my english) greetings

Up for grabs is a great pocket squonk mod, the BP Mods Bushido. This is an 18650 mod, takes up to 22mm attys and features bottom fill and a switch lock. Includes everything included when new - two bottles (one unused), spare bits including a new positive contact and a tool to remove the 510 for cleaning.

The mod is in good, used condition. There are a couple of very small finish dings from use. The mod has been disassembled and thoroughly cleaned.

$42 shipped. Payment via PayPal F&F or buyer assumes fees. Thanks!

What is the deal now ... A lot of these companies that I used to buy Nic base from are now only selling it to someone with a business license, or are completely out of business.

The last time a purchased Nic from was from Nicotine Giant. This was 1,000ml of 100mg nicotine base for $64.95 (that was about 6 months ago)

Now they want $79.95 for 1,000ml of 100mg nicotine base (pretty big price jump)

What is your go-to company to buy flavorless nicotine base for your DIY juice ?

Ron,

I used to purchase ready made vape juice in 15, 18 and 24mg Nic strength. Seems like the highest nic strength juice they sell now is 6mg.

What's the deal with that?

Are there some new laws that are preventing them from selling juice stronger than 6mg nic?

If you know of any vendor selling 18mg nic juice at a reasonable price (delivered here in Florida) please let me know.

BTW ... I am talking about 'regular' nic juice, not that "Nic Salts" type.

Thanks,

Is there a way to remove the Arctic Fox and return the Pico to its original configuration?

Hello everyone,

I just got the Kylin M Pro. It comes with a black, very boring, 810 drip tip. I got some really cool 810 drip tips that I use but they are a tiny bit longer than the one it comes with. As a result I am thinking of shortening one of them to satisfy my OCD cause right now it’s driving me crazy… Can anyone help with the procedure?

Thanks in advance, VP.

Hello, as our Chinese national day will be ending, our promotion will be ended too, here, we have four products are still in flash now, will be ended in 10.8, hurry to buy now.

Lost Vape Thelema Quest Box Mod: Flash Sale Price $35.99
Lost Vape Thelema Quest Box Mod 200W

Geekvape S100 Box Mod: Flash Sale Price $30.99
Geekvape S100 Box Mod (Aegis Solo 2) 100W

SMOK Novo X kit: Flash Sale Price $20.99
SMOK Novo X Pod System Kit 25W 800mAh

VOOPOO Drag X Pro kit: Flash Sale Price $29.99
VOOPOO Drag X Pro Pod Mod Kit 100W

Went to a local B&M yesterday and they sold me some “expired” juice (at full price mind you). I’m relatively new to buying e juice so it’s a flavor I’ve never tried before, but the first thing I noticed is it’s just sort of bland and weirdly.. spicy? (it’s called “naked 100 Cuban blend”, the expiration was on 06/20, didn’t realized it was an old batch til I got it home). Certainly doesn’t taste much like a tobacco, the smell is somewhat reminiscent I guess. Not having tried it before, I’m not sure if that’s just how this particular juice is or the flavor has actually gone off. The color is somewhat dark, but I imagine that’s to be expected in a tobacco flavor (I’ve had other tobacco flavors in the past that were lighter in color but it was from a different brand). Should I call them or bring it back and see if I can get it exchanged for something else? I mean it vapes ok but idk?

Hi everyone,

Just posting here to report my success
I quit smoking completely 2 years and 5 months ago
around my birthday in May 2019, when my little niece asked me
“arent you going to stop smoking cigarettes soon?”.
It was probably my 5th attempt to quit using vaping.
I use a very easy setup of an iPower mod and a Melo 3 tank.
I can recommend those for anyone wishing an easy solution.
My first iPower mod lasted over 4 years of daily use before batteries were
worn out and I had to get the new model which is even better it seems.

My cousin died of lung cancer last month. He was a smoker, but had quit. He was
53 years old and its very tough for the family, he was a very good person and very loved.

I havnt been keeping up with the news and research about health risks from vaping.
Is it getting more accepted as harm reduction? My lungs feel way better than when I smoked, thats for sure.

Thank you for reading, and have a nice day - keep on being an awesome community

So, I must be a very unlucky person when it comes to the durability of the Aegis Legend Mod...
I'm on my 3rd in about 5 years.
1st Legend Mod: Fell 2.5' from the bed on a rug....it quit working.
2nd Legend Mod: After 2 yrs, it quit working.
on my 3rd now: After changing batteries I constantly have to bang my hand on it to turn on. During normal use, I have no problems.

Strange.

"" Drug dealers are already making serious money selling e-cigarettes. A crackdown on imports could bolster their bottom line.

SYDNEY, Australia – It’s approaching 6PM and the sun has just set on another weekday in Sydney’s inner west. A black car pulls into a quiet suburban street and parks at the roadside. Minutes later, a girl in her late teens appears. She walks to the car and waits as the window rolls down.

“That’s just 25,” says the driver, placing a small box in her hand while accepting her money. And with that, another illegal nicotine vape is sold in Sydney.

Until recently, the driver – an 18-year-old, part-time drug dealer – would have been selling marijuana from the front seat of his car. It was earlier this year that he decided to pivot to e-cigarettes instead. His name has been changed for his protection.

“I started seeing a lot of people selling vapes and I thought to look into it. Then I realised that the profits are almost double,” James told VICE World News.

It’s been illegal to sell vapes containing nicotine in Australia for years, and illegal to carry or use them without a prescription in all states and territories except South Australia. In no other Western country do such rules apply, making Australian vape laws some of the strictest in the world........"

See full article here:
Australia's Vape Laws Just Got Even Tighter. The Black Market Isn’t Worried.

So as India outlawed all vaping and the US and Canada seem to be regulating it out of existence, Australia joins in in making harm reduction a crime !

I found this little guy kicking around in the bottom of my desk drawer. I haven't owned a Grand in quite awhile and rather than discard this, I'd like to send it to someone who can use it. It is in good condition - it looks like I used it but I'm not sure why it wouldn't still be in whatever mod it was in. Anyway, it should be perfectly functional as it shows no pitting on the contact surface.

Free to a fellow Reonaut - U.S. postage is on me. PM me if interested.

Lost Vape Cyborg Quest 100W



Lost Vape Cyborg Quest kit is a gritty and futuristic looking device, the mod is solid and sturdy, uses a single 21700/20700/18650 ⁠ battery and can deliver up to 100W. The Quest 2.0 chip offers 5 vaping modes and 3 user records.

Let's take a look at the characteristics declared by lost Vape:
• Look with a special shape, a symbol of personality and attitude
• Single 21700/20700/18650 battery, 100W max output, Type-C fast charging
• Equipped with Quest 2.0 chip, wattage mode / VPC mode / bypass mode / voltage mode / temperature control mode (SS904 / SS316 / Ti / Ni)
• 3 user records (normal coil, TC and RBA coil)
• Accurate temperature regulation
• UB Pro Pod Tank & UB Pro Coils⁠

The cardboard box with the white / gray colors seems to recall a "mecha" style and on the front of the outer sleeve they are present; the Lost Vape logo and trademark, an icon containing the caption "Quest 2.0" indicating the name of the chipset used on this version, finally there is also an indication on the maximum power of the mod (100W).

On the back are shown; the contents of the package, the warnings, the place of manufacture (China), a label containing a barcode, the color indication of this sample (Full SS) and the authenticity check of the Lost Vape product.



On the side profile of the box there are some icons containing the main features of the product and the Lost Vape motto "The Modern Demarcation".



Packing list:
• 1 * Cyborg Quest 100W Box Mod
• 1 * UB Pro Pod Tank 5ml
• 1 * UB Pro P1 Coil of 0.15Ω range 70-90W
• 1 * UB Pro P3 Coil of 0.30Ω range 60-70W
• 1 * 18650 Battery Adapter
• 4 * O-rings
• 1 * Type-C Cable
• 1 * User Manual
• 1 * Warranty Card



► Parameters:
• 510 threaded connection
• Dimensions: 104x32.6x44.2mm
• Weight 193g
• Body material: zinc alloy
• Battery: single 21700/20700/18650 lithium battery (not included)
• Screen Pixel: 0.96 "80 * 160"
• Output power: 5 ~ 100W
• Battery voltage: 3.0 ~ 4.2V
• Input voltage: 5V
• Output voltage: 0.7 ~ 8V
• Input current: 1A ~ 35A
• Temperature range: 100 ~ 315'C / 200 ~ 600'F
• Supported Resistance Range: 0.1 ~ 5.0Ω
• Supported coil material: Kanthal, nickel, titanium, SS316, SS904
• Charging: Type-C, DC 5V
• Tank UB Pro Pod (5ml) compatible with UB Pro and RBA UB Pro coils



► Choice of color:
We have a choice of 9 colors which are divided into two categories; Carbon Fiber and Stailnless Stell.
• Carbon Fiber; SS, Gunmetal, Matt Black.
• Stainless Steel; SS Honeycomb, Gunmetal Fish Bone, Matt Black Fish bone, Full SS, Full Gunmetal, Matt Black Steel.





► First impressions:
The colorway sent to me for this Cyborg Quest 100W test is "Full SS". Many of you might think of a device very similar to Artery Cold Steel, however the Lost Vape Cyborg Mod has a very specific identity with a much more refined and stylish design, robust and massive to the nth degree. It also uses and inherits from Thelema 200W the Quest 2.0 chip which in my opinion is among the best low cost chips in this category.

I am pleased to note that Lost Vape also tries to make its magnetic Pods interchangeable with each other, in fact the tank is the classic UB Pro Tank with the very comfortable raised side filling and it is the same magnetic cartridge used on the Ursa. The cartridge is equipped with the 510 connection with adjustable AFC already seen on the thelema 200W.



With the specific design of the intertwined lattice frame, the mod in the hand is quite comfortable despite the considerable weight. The thumb finds its natural position at the top within this design and the little finger naturally wraps and supports the Mod in the rounded part below to the front panel.



Cyborg uses the same Quest 2.0 chip and graphical interface that was used on the Thelema Quest 200W and Ursa Quest 100W. On the display it is possible to view:
• Coil value
• Battery level indicator with numerical percentages
• Operating mode
• Wattage setting
• Duration of the last puff and number of user records
• Power step (Soft, Normal, Hard) and Puff counter
• Settings
As on Thelema Quest there are 4 sturdy keys, precise and slightly protruding; fire button, adjustment buttons and mode button. Below at the bottom is the Type-C DC 5V charging socket.

Cyborg's frame is made entirely of zinc alloy. On the right side of the mod is the name of Lost Vape and on the right side is the name of Cyborg Quest. The back at the top has a nice woven design and at the bottom the design is smooth and round with comfortable grip.

Hi everyone! Just thought I’d pop by with an update on my progress. First,Thanks to all those that gave me very sound advice because it’s done more for me over the last week than I expected. I found that not going cold turkey completely has helped immensely and vaping a different way to smoking properly has really helped too! I have since found that I roll half of what I used to take to work ( around 10) and come home with at least 4 left.I went in to a local vape shop and explained my problem. The owner picked up a 10ml bottle and said try this, get back to me if it doesn’t suit. That was a turning point for me as I went back in last Friday and bought a 50 ml box of small bottles 10 mg plus 50ml nic free both the same flavour. Can’t tell the difference!
The only give away is I have 2 tanks, the smaller is 0 nic the larger has 10 mg. Need a blindfold to distinguish between them! Thanks again all!

Hello, I've been having a lot of problems with my AL85. I've been using it for about half a year on and off and only recently started using it daily.
The problem is that sometimes ( about 1 in 10 ) when you hold the button it does work but the battery level goes down to 0, sits there for a bit and then comes back. Sometimes that doesn't happen and it all together just doesn't do anything. I am confused, I've tried reinstalling the battery multiple times, cleaned the contacts, etc.
Is It just time for a new battery or is It something else?

I'm looking to trade my REO P67 for other squonk gear. The P67 is in very good, used condition. Black wrinkle finish with copper vein SL door (door has darkened over time). The pictures should speak to the condition. If you have any trouble viewing the pictures, PM me and I can email a link to the pictures.

P67 will include the allen key to adjust the 510 and a brand new, properly fitted silicone bottle (not pictured).

RRP on this P67 was $225. I'm looking to trade for other squonky things with preference given to mechanical squonk mods. I will also entertain regulated squonk mods and high end squonk attys. I never know what is going to strike my fancy so don't be shy. Cash can go either way to even out the deal.

Will also sell outright for $125 shipped, paid via PayPal F&F. G&S buyers to pay fees.

The P67 is currently packaged and will ship same or next day depending on timing.

I see on YouTube all these people recycling their coils, you know rinse & soak coils in 100% alcohol for 24 hours and Bob’s your uncle.

What are peoples experiences that have done this with coils. Does it really work?

To me it seems that once a coil is used and burnt, then it can’t be used again. But what do I know? Stacks of YouTube people swear by it.

I received kylin m pro rta from Vandy vape for the purpose of this review.

Vandy vape kylin m pro rta colors:

- Rainbow
- Ss
- Gun metal
- Gold
- Matte black
- Frosted grey






Speicifications:

Length: 33.35mm
Diameter: 24.2mm
Capacity: 6ml/8ml


In the box:

1* Kylin M Pro RTA
2* Vape Cotton Laces
1* Accessory Bag
1* Pyrex Glass Tube
1* Instruction Manual
2* A1 M Coils 0.2ohm
2* A1 M Coils 0.15ohm






Kylin m pro is new mesh rta from vandy vape and this atomizer comes in really nice package where you will receive coils, 2 tanks, cotton and tool for the coil. Build quality of the atomizer is really good, nothing to complain about as expected from vandy vape. Atomizer is 24.2mm in diameter on the base and height of the atomizer is 33mm.






Atomizer comes with 810 drip tip and you can use here any other 810 drip tip if you want. With this atomizer you will receive 510 drip tip adapter so you can use here 510 drip tips if you want.
This is a top fill atomizer and you can pretty easy take off the top cap, you need quarter turn and then you can take it off which is good. When you take off the top cap you can see two holes for eliquid and you can fill this atomizer with any bottle which is really nice.


This is a top airflow atomizer which many people like. The airflow control ring is under the top cap and you can easily adjust the airflow here. On the airflow control ring you can see two airflow slots and what you adjust on one side it will be the same on the other side.








Atomizer comes with two tanks, with this atomizer you will receive regural tank and you will receive bubble tank. With regular tank capacity of the atomizer is 6ml which is really good capacity in my opinion but with bubble tank capacity is 8ml which is great capacity and I belive mmany people will like the capacity here.

Chamber has really nice conical hape which improves the flavor, when you look at the chamber from the inside you can see how airflow wokrs on this atomizer.
On the base you can see two screws for clamps that holds the coil. In the package with this atomizer you will receive 4 mesh coils which is really good, but also you will receive cotton. Building on the atomizer is simple because you will receive coil tool to bend the coil and all you need to do after is to place it. Wicking is also pretty simple especially if you used mesh rta before. You need to cut cotton at angle and place it inside. On the picture you can see how I wickied the atomizer.














My thoughts:

Let me start with the package, it is really good because you will receive coils, cotton, tool and 510 drip tip adapter. On this atomizer you can use your 810 or 510 drip tips without any problems which is really good. You can fill the tank fast and without problems using any bottle. Capacity is good with regular and with buble tank, with bubble tank you have 8ml capacity which is great. You can easy adjust the airflow and we have top airflow here which many will like. Building and wicking is pretty simple and if you ever used any mesh rta you will have no problems with this one. This atomizer performs really well, flavor is very good and you can expect good vapor production, personally I have nothing to complain about this atomizer, it is really well made and it performs great, so if you like mesh rta's you can get this one.



Cons:

- I can't complain about anything here


Pros:

- Good build quality
- Cotton and coils in the package
- 6ml and 8ml capacity
- Easy to fill
- Easy to adjust the airflow
- Flavor is very good and there is a lot of vapor
- Wicking is good
- Top airflow

Thanks Vandy vape
You can check this atomizerhere: Vandy vape m pro rta

I have the Vaporesso Gen S w/ the NRG-S tank it came with, and I'm using Vaporesso GT 8 coils(50w-110w)
I replaced my coil on Saturday with my last brand new coil and somehow I think it got flooded - I primed it, I let it sit in the tank with juice for like 15 minutes, I started vaping at a lower wattage and was planning on gradually moving up until iwas at my usual wattage but the first time I tried to fire it it was gurgling and spitting ejuice smoke was coming out the bottom of thd coil as well as ejuice leaking from the bottom of the coil.
I took it apart, blew air through it a bunch of times let it sit out and dry for 24 hours. When I put it back it in, the same thing happened, so I repeated what I did before and now it's Monday and it's still acting like it's flooded.
I don't get it because all over the internet people talk about what an "easy fix" a flooded tank is. What am I doing wrong?
Please help!

Today,I wanna introduce you the Hellvape VERTEX MTL RTA 22mm.If you are seeking a reliable MTL RTA,you should try it which bring you the delicious vapor.Let's check it out.

Discover the Hellvape VERTEX 22mm MTL RTA, a single coil RTA offering a turntable airflow control, MTL hole and slot intake options, and holds up to 3.5mL. Constructed from durable stainless steel, the chassis of the VERTEX RTA is sleek and offers a 3.5mL capacity with optional 2mL glass tank.

Offering a rotating turntable airflow with three options, the versatile airflow is intaken via slotted airflow control with MTL hole options. Equipped with a single coil build deck, the dual post structure contains a single terminal on each and is top secured to fasten down coil leads securely.

Don't miss this good chance,there's a promotion for National Day,go to national day vape sale to deserve it.

You may also like:

geekvape s100 mod price
wotofo profile squonk vape box mod

"“The Philippine Senate will be on the right side of the people when it approves the most progressive vaping legislation in Asia Pacific,” says Nancy Loucas, Executive Coordinator of the Coalition of Asia Pacific Tobacco Harm Reduction Advocates (CAPHRA)........

The survey revealed a staggering 94% of respondents agree that the Government should enact policies to encourage adult smokers to switch to less harmful alternatives to cigarettes. At the same time, they must ensure these products are not used by the youth.......

Peter Dator, president of consumer group Vapers PH and CAPHRA member, says the results of this survey come at a crucial time.

“The Senate should be very encouraged that 9 out of ten Filipino smokers support the Government passing laws to encourage them to switch to less harmful alternatives. The support is overwhelming,” he says.

Ms Loucas says the Philippine Government should be congratulated for its determination to reflect the will the people.

“The Government has done well not to succumb to the World Health Organisation’s lies about vaping or Michael Bloomberg’s bullying of governments to ban safer nicotine alternatives,” she says.

The latest research proving anti-tobacco billionaire foundations have funnelled millions into Asia Pacific NGOs to lobby governments to ban vaping, and discredit vaping advocates, has received worldwide press attention........

Consumer groups in the Asia Pacific region have also launched a petition at change.org/v4v-petition that urges the WHO to respect consumer rights and to stop demonizing Tobacco Harm Reduction options ahead of November’s meeting of the WHO FCTC.

Philippine Survey Confirms Huge Support For Vaping | Scoop News

Hey all.
I’m still pretty newbie to vaping.
I was given a Smok species, that worked okay with only a few hiccups, as it kind of having a life on its own - seen the voltage change by itself even though the screen was locked
Well learned to live with that
I got this really annoying problem basically thanks to my boyfriend
He borrowed it since he forgot his own Smok Scar 18. When I got it back he had switched out my TFV-Mini V2 5ml tank with his TFV9 2ml
To no surprise it’s leaking and had to buy a new tank, only problem is that the tank is stuck on the mod, the treads broken. I have removed the glass and coil in my attempt to get it off. Nothing has worked and I’m out of ideas.
If someone has the answer, you’ll save me quite a lot of money from buying a new one

Best regards

Hello everyone. I'm really hoping someone can help me out here because I really cannot figure out what is wrong with my materials.

Recently I decided to buy the berserker mini v2, a building tool kit, 28G kanthal wire and Cotton Labo Japanese organic cotton pads from Amazon. This was an investment after getting rid of a lot of my old vape stuff which was a bad idea.

I'm very good at building my coils. I tried spaced, contact, between 6 to 10 wraps, 3mm to 2mm inside diameter, must've tried building too many coils and would always taste burnt and bad flavor after about 20 hits.

The eliquid I use is a net eliquid, a very highly reputable company and their eliquid is not supposed to gunk up the coils so fast. When I would open up my tank at the sink to unfortunately spill out the liquid because I would have change the coil again, the cotton underneath the coil was all black. When I use the Nautilus coils they seem to last a lot longer and this is very upsetting because for those few moments that I got good flavor, the flavor was amazing.

Can someone please help me try to figure out what is wrong here? I was so excited to get back into building coils and now I had to purchase Nautilus coils. Thank you in advance.