What is the best/safest way to clean an ego-t atty? Thanks for the help
Gatorfan, in addition to distilled water, you can safely use PGA (Everclear) or vodka. And a quick dry burn to get rid of the crud on the coil. I've done it several times without any problems.
I was reluctant to try cuzzcon's method; I really didn't like the idea of using a chemical (IPA) in something that i would inhale in my lungs--he does put a disclaimer in the video.
Thanks, Katya. A couple juices I use from vaperite are 50/50 and after a couple days the atty will get clogged and I'll blow it out and do a dry burn that brings it back.
Thanks for your help and comments.
cheers,
I feel the same way, I mentioned Everclear in my post...that seems less chemicall-y.
Everclear is perfect, if you can get it.
I'm in TX...need to do a liquor store run soon anyway!
Im terrified of the dry burn, in the region attys the filling under the bridge would burn making the atty disgusting. Is the ego-t atty similiar with a filling inside of it?
I was reluctant to try cuzzcon's method; I really didn't like the idea of using a chemical (IPA) in something that i would inhale in my lungs--he does put a disclaimer in the video.
I did try his method and let the atty dry for 48hrs, but still got that chemical taste even after quite a few draws. So I stopped and re-cleaned the atty along with a couple other atties by using distilled water. I brought the distilled water up to boil, turned off burner, and used a turkey baster to flush all the atties out; and then soaked them in the heated distilled water for 15 minutes and blew out. I let them dry for 24 hours and loaded them up with ejuice and vaped away.
This method worked very well for me and it will be my choice of cleaning eGo-T atties and atties in general from here on out.
cheers,
If you're going to bring water to a boil anyway, wouldn't tap water then be ok? Realizing that Everclear isn't exactly the most money conscious choice...