Not enough vapor

[VaperDynasty]

So i built 2 24g twisted coils running at .2 ohms at 70 watts and not seeing a whole lot of vapor

 

[Ryedan]

So i built 2 24g twisted coils running at .2 ohms at 70 watts and not seeing a whole lot of vapor

What are you comparing it to?

What's the air flow around the coils like? At 70 watts you should be doing a fairly fast lung hit. Also, be careful that the coils don't touch the inside of the cap.

 

[VaperDynasty]

What's the air flow around the coils like? At 70 watts you should be doing a fairly fast lung hit. Also, be careful that the coils don't touch the inside of the cap.

the airflow is all the way open on both coils not touching and seems to be fine now just had to break it in lol

 

[Ryedan]

the airflow is all the way open on both coils not touching and seems to be fine now just had to break it in lol

Sounds good to me

 

[Verb]

There's a lot of mass in those coils. It's gonna take a longer time to reach vaporization temp.

 

[CloudyWithChanceOfVape]

Um, turn your power up if you're on a regulated device.... If not, press fire button, exhale into the RDA, make a little freight train show, then inhale hard.... May just need that extra 1-2 second heat up to make the cloud you desire.

 

[Jim Beam]

If your looking for clouds, I'd go with a smaller wire.
Takes less power and longer battery life.
I use 28g in my kayfuns and orchids.
Both produce plenty vaper at 15 & 21w.
My 454 big block I can run single to quad coils.

Jim