LoL....you know I wouldn't pick on you if I didn't love ya brother!Naaaaaa, he needs to save his strength, he's goin under in six days, and in his shape, he needs all the strength he can muster,
Nicely done again Steve!Off topic but I want to show you folks an SX350J squonker I just made exclusively for one of my Nuppins. I'm not a fan of regulated mods in general but I wanted to try this SX350J board with the Nuppin so I got myself one and got to work on a stabilized piece from Froggy.
Everything you see here with the exception of the 510 and the chip is machined by hand. Must admit that the biggest problem I faced was the bottle configuration so I came up with a modification where by the cap of the bottle is machined to the same diameter as the squonk tube and is fixed in there. To remove the bottle (since you have nowhere to grab it from) I made a bottom cap for it with a metal tab which is bonded to the bottle so you can grab and unscrew it for filling/cleaning.
I have to say that the Nuppin is still equally a stellar vape with a Ni200 coil at 0.07Ω at 30 Joules and 400F.
I normally don't post the stuff I make for myself but I want to make it clear that I didn't post this to advertise or advise peeps that I make mods because I don't and never will. I fly for a living and that will never change, what you see here is for personal use and purely a hobby I've pursued for the past couple years and I only post it to share with you my creation.
Perhaps the reason I admire so much Peter's work is because I have a clear understanding of what it takes to consistently achieve the results he does.
Thanks Pete, you're an inspiration
BTW vaped it hard for a couple hours and then returned to the bliss of the Pinch The best things in life are certainly the simple one's
Off topic but I want to show you folks an SX350J squonker I just made exclusively for one of my Nuppins. I'm not a fan of regulated mods in general but I wanted to try this SX350J board with the Nuppin so I got myself one and got to work on a stabilized piece from Froggy.
Everything you see here with the exception of the 510 and the chip is machined by hand. Must admit that the biggest problem I faced was the bottle configuration so I came up with a modification where by the cap of the bottle is machined to the same diameter as the squonk tube and is fixed in there. To remove the bottle (since you have nowhere to grab it from) I made a bottom cap for it with a metal tab which is bonded to the bottle so you can grab and unscrew it for filling/cleaning.
I have to say that the Nuppin is still equally a stellar vape with a Ni200 coil at 0.07Ω at 30 Joules and 400F.
I normally don't post the stuff I make for myself but I want to make it clear that I didn't post this to advertise or advise peeps that I make mods because I don't and never will. I fly for a living and that will never change, what you see here is for personal use and purely a hobby I've pursued for the past couple years and I only post it to share with you my creation.
Perhaps the reason I admire so much Peter's work is because I have a clear understanding of what it takes to consistently achieve the results he does.
Thanks Pete, you're an inspiration
BTW vaped it hard for a couple hours and then returned to the bliss of the Pinch The best things in life are certainly the simple one's
Off topic but I want to show you folks an SX350J squonker I just made exclusively for one of my Nuppins. I'm not a fan of regulated mods in general but I wanted to try this SX350J board with the Nuppin so I got myself one and got to work on a stabilized piece from Froggy.
Everything you see here with the exception of the 510 and the chip is machined by hand. Must admit that the biggest problem I faced was the bottle configuration so I came up with a modification where by the cap of the bottle is machined to the same diameter as the squonk tube and is fixed in there. To remove the bottle (since you have nowhere to grab it from) I made a bottom cap for it with a metal tab which is bonded to the bottle so you can grab and unscrew it for filling/cleaning.
I have to say that the Nuppin is still equally a stellar vape with a Ni200 coil at 0.07Ω at 30 Joules and 400F.
I normally don't post the stuff I make for myself but I want to make it clear that I didn't post this to advertise or advise peeps that I make mods because I don't and never will. I fly for a living and that will never change, what you see here is for personal use and purely a hobby I've pursued for the past couple years and I only post it to share with you my creation.
Perhaps the reason I admire so much Peter's work is because I have a clear understanding of what it takes to consistently achieve the results he does.
Thanks Pete, you're an inspiration
BTW vaped it hard for a couple hours and then returned to the bliss of the Pinch The best things in life are certainly the simple one's
Like the Capt. I'm always sticking my fingers in tight places that you can't always get a good view of. In general I enjoy it, but sometimes it least to unpleasant surprises. (usually for me, but occasionally for others)lookin' good, Cap'n! I see you recessed the 510/atty a bit on this one too. Seems to me you're partial to fiddling with stuff where you can't quite get at it unless you stick yer finger in there.
seems.
with the bottle cap and the recessed 510 . . .
seems like.
Like the Capt. I'm always sticking my fingers in tight places that you can't always get a good view of. In general I enjoy it, but sometimes it least to unpleasant surprises. (usually for me, but occasionally for others)
Like the Capt. I'm always sticking my fingers in tight places that you can't always get a good view of. In general I enjoy it, but sometimes it least to unpleasant surprises. (usually for me, but occasionally for others)
I'm sure, as she must like bitter old Italian blend. ....hahahaha.
--- That was for the IM this morning.
I love seeing you two together!On a completely unrelated note: we had a bumper crop of cute this year [emoji6]
Master of Bassets...and not much else
On a completely unrelated note: we had a bumper crop of cute this year [emoji6]
Master of Bassets...and not much else
Hey, it's just good to be talked about....LoL!Well it's a good thing you didn't read the things Bob and I were saying about you in our PM's today, then.
Pinch at the top of the world [emoji3] (right before The Evil One pushed me)
Master of Bassets...and not much else