The Tsunami 24's come with a BF positive pin.
3mm id 24ga ss 6wrap, ohms to .18Would you folks please describe your tsunami builds. No matter what I try I can't find any flavor, and the wicks seem to dry out so fast since there is not much room for wick tails...
In one of mine, I am using dual parallel 26g Ni80 coils, 6 wrap, 3mm, and ohms out to .18. I am using 1/2 rope of rayon in each and just long enough to tuck into the area next to the air tubes. Working like a charm. I'm waiting on my preorder for the Kanger 160 so I can crank up some watts on one of these using some SS fused Claptons. I just can't run fused on a mech.Would you folks please describe your tsunami builds. No matter what I try I can't find any flavor, and the wicks seem to dry out so fast since there is not much room for wick tails...
Is this the one with the two piece center pin?Any interest in the Shingen RDA?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I've suggested a few here as well.Hey, FYI, I've seen a couple folks looking for BF RDA's since they're picking up the DripBox...which comes with a peice of crap.
Sending 'em here - but there's not much in stock! I'd say you could definitely keep selling some ChiNarDas...
I might even pick up another, if I get a bonus or something (spent too much recently, lol)
Working on ordering some replacement stock. Any special requests or suggestions?Hey, FYI, I've seen a couple folks looking for BF RDA's since they're picking up the DripBox...which comes with a peice of crap.
Sending 'em here - but there's not much in stock! I'd say you could definitely keep selling some ChiNarDas...
I might even pick up another, if I get a bonus or something (spent too much recently, lol)
Is this the one with the two piece center pin?
I'm in for one! [emoji23]
Definitely like the top air RDAs for leak resistance. Center pin looks straightforward enough, like most all other two posters. Post slots look like an awesome idea!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
The authenic may not be able to be but the chiShingen has a m3 positive post so "shouldn't" be a problem [emoji6]I thought the shingen couldn't be bottom fed?
Sent from my SM-G925V using Tapatalk
Nice, I was just wondering cause it was brought up on the other thread too. I always thought it would make a decent squonker.The authenic may not be able to be but the chiShingen has a m3 positive post so "shouldn't" be a problem [emoji6]
Sent from my SAMSUNG-SGH-I337 using Tapatalk
10 more on order. Expect a week or so before ready to ship.Will there be more nardas on the site anytime soon? I did have an authentic but I traded it and I'm tired of dealing with the whole Facebook thing.
Sent from my SM-G925V using Tapatalk
Awesome, thank you I will keep my eyes peeled for them.10 more on order. Expect a week or so before ready to ship.
Also ordered 10 shingen...I hope they work out[emoji6]
Sent from my SAMSUNG-SGH-I337 using Tapatalk
The authentic is also m3 on the bottom but the issue is the m2 that actually holds the positive post threads into the m3. I saw no way to bore and rethread the post to allow an m3, even an m2.5 would be dicey. I had high hopes for this one also. If you can make it flow well I'm certain it will be very popular. Btw if the pic above is the clone it seems to be the same as the authentic with the m3 to m2 changeover (notice the skinny pin in the center of the attys holding down the post. If you can make an m2 bottom feed well you are a much better man than I. Nothing but love Roscoe....The authenic may not be able to be but the chiShingen has a m3 positive post so "shouldn't" be a problem [emoji6]
Sent from my SAMSUNG-SGH-I337 using Tapatalk
If you can cancel I would advise it, I will send you a brand new authentic if you want a closer look, on me.10 more on order. Expect a week or so before ready to ship.
Also ordered 10 shingen...I hope they work out[emoji6]
Sent from my SAMSUNG-SGH-I337 using Tapatalk