*ATOMIZER IDENTIFICATION HELP* A Bathing Ape (bape) Smoker atomizer

[yunggolf]

(ecig is based off the DSE901)
I am new to ecigs, and I need help. I bought a Bape Smoker (bape = a bathing ape - japanese brand) that was released in 2010, it is a collectors item and has been never used. I used it about a week ago, it didn't work at first, but time to time, some vapor came out for a limited amount of time. I used it again after a day, and the atomizer had fallen apart (most likely due to age) so i bought an atomizer that was close to what it came with (Joye 306 electronic cigarette atomizer - Genuine Joye!) but the screw fit too small and was a little smaller than the original. I have been searching for a new atomizer but cannot find one, i need help identifying the name of an atomizer that is like the one it originally came with it, anything helps! Thanks.

 

[yunggolf]

 

[yunggolf]

damn imgur pics wont load

 

[Train2]

I think the 901 is the SIZE and that's why 510 won't screw on.
Here are a couple options - 901 atomiser or even better it looks like you can order a "Cicsco spec" high quality atomizer, and pick your ohms... Not sure if that's what you had in mind, or what the original had - but those are good atomizers, that last...

 

[Train2]

It works - if you click on the word IMGUR, than I see your pix

damn imgur pics wont load

 

[tazzle]

Just to make it easier, here's the link.

 

[yunggolf]

Just to make it easier, here's the link.

thanks, was wondering why it didnt show lol

 

[yunggolf]

I think the 901 is the SIZE and that's why 510 won't screw on.
Here are a couple options - 901 atomiser or even better it looks like you can order a "Cicsco spec" high quality atomizer, and pick your ohms... Not sure if that's what you had in mind, or what the original had - but those are good atomizers, that last...

My ecig uses cartridges that are like the end of a real cigarette, are there any atomizers that screw on to the cig and then put on the cartridge to use it? Maybe compatible atomizers? (I also bought an atomizer before posting this, its called "atomizer - njoy NPRO - RN4081 - 2.0ohms - Single")

 

[djsvapour]

You need to find someone who remembers this hardware.
4081 was a thread adopted by rip off merchants to lock people into proprietary cartomizers.
The 901 atomizer was used to fit with cartridges (from what you are saying)
The problem you will face is a painful lack of availability of both atomizers and cartridges.
Now, truth is you would be throwing good money after bad. Nobody chooses to use prehistoric hardware and the results will send you back to the early and painful days of the ecig history.
4081 was designed to corner users into brand slavery. 901 was just a thread that pre-existed 808 and 510... more 'open source' but not exactly universal.

 

[Shadav]

i'm sure there's an adapter out there to convert to a 510 or ego threading....
that's going to be your best option to find first, then find an atty/tank/ect to fit your needs.

 

[BrotherBob]

(Ecig is based off the DSE901)
I am new to ecigs, and I need help. I bought a Bape Smoker (bape = a bathing ape - japanese brand) that was released in 2010, it is a collectors item and has been never used. I used it about a week ago, it didn't work at first, but time to time, some vapor came out for a limited amount of time. I used it again after a day, and the atomizer had fallen apart (most likely due to age) so i bought an atomizer that was close to what it came with (Joye 306 electronic cigarette atomizer - Genuine Joye!) but the screw fit too small and was a little smaller than the original. I have been searching for a new atomizer but cannot find one, i need help identifying the name of an atomizer that is like the one it originally came with it, anything helps! Thanks.

Welcome and glad you joined.This should help you get started.
Cartos:
SmokTek Cartomizers - Boge single-coil and SmokTech Single Coil or Dual-Coils | SmokTek.com
http://www.litecigusa.net/kr808d_1_cartomizer_p/premkrblankcart.htm1
Smokeless Image | The Best Electronic Cigarette
Could google: "vape: thread-adapter-808d-1-to-510/".
re: 510 to [KR808D-1/DSE901] Adapter
510 to V3 (KR808D 1) Cartomiser Adapter
Adapters-Connectors

 

[yunggolf]

i bought a atomizer after i posted this because i'm desperate lol, is this any good? it looked close enough to fit.
eSmokeClub - Atomizer - NJOY NPRO - RN4081 - 2.0ohms - Single

 

[Topwater Elvis]

If you have a dse901 battery you have to use dse901 atty's, but there are several versions.
The adapters were always problematic, ranging from fail to work at all, to cut off air flow, getting stuck on 'tank', to ruined threads on battery.

There are still several places that sell them 'google' DSE901.
Using whatever piece your looking for, atomizer / tank / cartridge / battery

 

[yunggolf]

I made a thread asking for ID help on a atomizer I bought and broke in April: (NEW TO E CIGS ATOMIZER HELP) Which Atomizer do i use for my ecig? . I bought another one brand new after searching, with measurements, and in one piece of how it looks like. Can anyone help identify what this atomizer is called or where I could buy this. Thank you

 

[IMFire3605]

Could be wrong, but from the looks of it, it appears quite similar to a 306 Atomizer though the bridge (mesh) at the top is a bit larger so could be a knock off.

LR306 Low Resistance Atomizer 1.8 ohm (Cisco Spec)
LR306 Low Resistance Atomizer 1.5 ohm (Cisco Spec)

 

[yunggolf]

Could be wrong, but from the looks of it, it appears quite similar to a 306 Atomizer though the bridge (mesh) at the top is a bit larger so could be a knock off.

There is less grooves on mine than the 306 you linked
LR306 Low Resistance Atomizer 1.8 ohm (Cisco Spec)
LR306 Low Resistance Atomizer 1.5 ohm (Cisco Spec)

 

[TJVapes]

Maybe 401. If I recall correct 306 and 510 are compatible threads.

 

[TJVapes]

If it's a 901, you can get one at myvaporstore

 

[yunggolf]

If it's a 901, you can get one at myvaporstore

Any chance this could be it? The height looks similar and the grooves are close
Plenty of MSeries Accessories for Your E-Cigs " Electronic Cigarette | Electronic Cigarettes | E-Cigarettes | E-Cigs from Smoore " Atomiser - M602

 

[TJVapes]

Any chance this could be it? The height looks similar and the grooves are close
Plenty of MSeries Accessories for Your E-Cigs " Electronic Cigarette | Electronic Cigarettes | E-Cigarettes | E-Cigs from Smoore " Atomiser - M602

Really the only way to know for sure is to buy it and try it. If you're just looking for a pen style, I would go ahead and buy a 510 kit, but there's so much better stuff out, why would ya. You could spend a lot of money looking for the right one. Anything other than 306, 510,808, 901 was outdated or very unpopular before 2010. BTW, I don't think it is 901 because 901 and 808 also share the same threads.