http://www.cloupor.com/cloupor-mini-plus-50w-ni200-titanium-smart-temperature-control-box-mod
Specs:
50 watts
VV/VW /TC (Smart TC Technology Ti and Ni200)
Stain steel 510 connector with spring loaded pin
Single 18650 battery (not included)
Magnets back cover
Output power: 1W-50W
Output voltage: 0.5V-7.0V
Joules range: 10-50J
Mode: VV/VW/TC
Standard resistance: 0.1-3.5ohm(VV/VW)
Joules resistance: 0.1-0.5ohms(Ni), 0.1-0.8ohms(Titanium)
Temperature limit: 200-600 Fareheit / 100-300 Celsius
Smart-auto temperature control
Can be charged through micro USB port
Optional Left and Right Mode
Reverse battery protection
Over-charge protection
Multi holes for ventilating
I want to thank www.healthcabin.net who is a supporting forum vendor for getting me front of line access to the other orders out there!
Some Pro's and Con's
Ni & Ti modes and built in pass through charging seems to be standard these days, but I am glad it is there. The temp control functions all seemed to work well and the warm up time was similar to mods like the istick 60TC/Sigelie 75TC. It felt accurate comparing to my hohm wrecker apples to apples @450F degrees. It does not do temp in SS, but of course you can use SS coils in wattage mode without issue.
The 510 appeared to be stainless and of good quality. If you import this I have seen it as low as $35 but you probably will have the warranty card yanked from the box *IF* that matters to you. I found no real hesitation (delay) in the fire button to vaping and I thought the finish was sexy with the electric blue (5 color options exist).
I have no doubt as small as this is that it will be popular this fall 2015 so check it out at the local B&M's.
Thanks!
Some video thoughts below while having some coffee
Specs:
50 watts
VV/VW /TC (Smart TC Technology Ti and Ni200)
Stain steel 510 connector with spring loaded pin
Single 18650 battery (not included)
Magnets back cover
Output power: 1W-50W
Output voltage: 0.5V-7.0V
Joules range: 10-50J
Mode: VV/VW/TC
Standard resistance: 0.1-3.5ohm(VV/VW)
Joules resistance: 0.1-0.5ohms(Ni), 0.1-0.8ohms(Titanium)
Temperature limit: 200-600 Fareheit / 100-300 Celsius
Smart-auto temperature control
Can be charged through micro USB port
Optional Left and Right Mode
Reverse battery protection
Over-charge protection
Multi holes for ventilating
I want to thank www.healthcabin.net who is a supporting forum vendor for getting me front of line access to the other orders out there!
Some Pro's and Con's
- Sleeve and USB in the box!
- Size 37mm x 22mm x 78.5mm
- Low power protection @ 3.4 volts
- Stable 0.1 ohm
- Dry Coil Warning
- Flip Screen Left or Right
- Extra Magnets in box (who does that!)
- Quite
- Ti/Ni
- Only 50 watts (seems like we are establishing more in the 60-75 range these days even at this price)
- Price, seeing retails as high as $55+
- More of a PSA - You buy this from places like Gearbest or fasttech you may not the get the warranty card (90day)
- Did I mention, it is only 50 watts - It is what it is
- Buttons a tad stiff
Ni & Ti modes and built in pass through charging seems to be standard these days, but I am glad it is there. The temp control functions all seemed to work well and the warm up time was similar to mods like the istick 60TC/Sigelie 75TC. It felt accurate comparing to my hohm wrecker apples to apples @450F degrees. It does not do temp in SS, but of course you can use SS coils in wattage mode without issue.
The 510 appeared to be stainless and of good quality. If you import this I have seen it as low as $35 but you probably will have the warranty card yanked from the box *IF* that matters to you. I found no real hesitation (delay) in the fire button to vaping and I thought the finish was sexy with the electric blue (5 color options exist).
I have no doubt as small as this is that it will be popular this fall 2015 so check it out at the local B&M's.
Thanks!
Some video thoughts below while having some coffee
Attachments
Last edited: