Digiflavor Siren GTA

[Nailz]

If the orings are about 22mm wide, I would contact them and tell them they sent the wrong ones, they may well send you a new set out.

Mine didn't come from them.

 

[52anddone]

If the orings are about 22mm wide, I would contact them and tell them they sent the wrong ones, they may well send you a new set out.

Mine didn't come from them.

I've done that straight away. It'll prolly take 24 hours for them to reply, and this being the beginning of the weekend........

 

[Nailz]

I think if the subtank mini fit the 22mm siren, then the subtank plus should fit the 25mm, but the down point is, it is only the flat oring that will work I think, so will only get 1 working oring out of a set, but can get a set for a dollar if shop around on sales.

 

[52anddone]

That was my thinking also, as I got a set of 5 and thought that that would last me for a while.

 

[dark_hawk]

Thanks, dark! Yes, you got it. However, the one on the left is a KFM v3 "Plus" size (aka the Fatty). I have such a love/not love thing going on with that version of the KF. I love the look, I love the vape, and I do NOT love the wicking. Seems I have a hard time with getting the wick over the wall and into the well. Oh "well".

The wine is great little tanks in a few ways.

• Firstly, there can't BE an easier tank to wick. It's similar to the Digi in that the wick goes down two little channels, but it's MUCH more forgiving. One doesn't need to stuff it full like we do with our Digi.
• Secondly, it's got such a simple, clean design.
• And thirdly, flavor... oh my this one is definitely flavorful. One might actually say TOO flavorful. The hit is much more intense than on any of my other tanks. So, once again, it's totally subjective as to whether or not that would be a Pro or a Con. I know that I can't vape it first thing in the morning, and that's for sure!
• It's on the airy side. There's no adjustment, so I've taken to using a tank band to cover some of the air hole. (pic below)
• It (sadly) does tend to be a leaker/weeper at times. It's the only tank I've ever used that can produce not just a little bit of weepy thru the air flow hole, but actually (only occasionally) can spill out a large globule of liquid right on your lap just from holding the device and vaping it (on the horizontal). I've learned to keep them upright, and nope, they do not go out in my purse with me!

View attachment 640255

All in all, I'd still recommend it. Hope that helps!

Thanks so much for the detailed reply.
If the KF V3 mini "Plus" shares the same deck with the KF V3 mini, then I understand your woes. This tank gave me so much headache when I first received it that when I go to pick it up I'm filled with dread of what it has in store for me this time. But when it's up and running it's a decent atomizer. I noticed it helps a lot if you place the coil diagonally.

The Wine looks like a nice tank. What caught my eye was how simple it looks (fewer parts means less problems) and the domed looking chamber which explains why you describe it as "too flavorful".
But as Jim- said, if you can find one, and I can't find it anywhere. I'll keep it in the wish list on FT.

 

[Khanninnarh]

If I was doing a audit on how much I've spent on vape gear these last almost 2.5 years, I think it would have been cheaper for me to have kept smoking, to be honest.

Me too!!


Sent from my iPhone using Tapatalk

 

[52anddone]

I just ordered 1 set of "Kanger Subtank Plus" o-rings "Transparent" in color, from my old stand-by Sweet-Vapes. They are close to me and ship fast. I have to know if they will fit in my Siren 25mm. This is now becoming an obsession with me.

Edit; I had a thought, so I just went back and ordered a set of "Subtank V1 Original" o-ring packs in Transparent color also. Wish I would have thought about doing that in the beginning, it would have saved me $3 in postage. Oh well, ya win some, and ya lose some I guess.

 

[52anddone]

I think if the subtank mini fit the 22mm siren, then the subtank plus should fit the 25mm, but the down point is, it is only the flat oring that will work I think, so will only get 1 working oring out of a set, but can get a set for a dollar if shop around on sales.

Yes I did just that Nailz. I went to Sweet-Vapes and got a set of "Subtank Plus" and "Subtank V1 Original" o-rings for $.95 each set. So now I'll get them sometime next week, I hope, as I'm getting anxious about this o-ring solution for my Siren 25.

 

[Katdarling]

No problem Just, I enjoy doing this to help others, as others sure have helped me throughout the years.

You're a good man, 53.

Thanks so much for the detailed reply.
If the KF V3 mini "Plus" shares the same deck with the KF V3 mini, then I understand your woes. This tank gave me so much headache when I first received it that when I go to pick it up I'm filled with dread of what it has in store for me this time. But when it's up and running it's a decent atomizer. I noticed it helps a lot if you place the coil diagonally.

The Wine looks like a nice tank. What caught my eye was how simple it looks (fewer parts means less problems) and the domed looking chamber which explains why you describe it as "too flavorful".
But as Jim- said, if you can find one, and I can't find it anywhere. I'll keep it in the wish list on FT.

The deck on the KF Mini and the Fatty are indeed the same. I'm ALWAYS hesitant to want to get one set up, and really have to get myself mooded to do one, but once done, it's really quite a nice vape.

Have you looked on FB for the Wine, dark? Perhaps you can contact them for a current source?
Shenzhen ShenXingKang Technology Co., Ltd. -SXK Ecig | Facebook

Or, if you want 10 of them......
wine - search result, Shenzhen Shenxingkang Technology Co., Ltd.

I just ordered 1 set of "Kanger Subtank Plus" o-rings "Transparent" in color, from my old stand-by Sweet-Vapes. They are close to me and ship fast. I have to know if they will fit in my Siren 25mm. This is now becoming an obsession with me.

Edit; I had a thought, so I just went back and ordered a set of "Subtank V1 Original" o-ring packs in Transparent color also. Wish I would have thought about doing that in the beginning, it would have saved me $3 in postage. Oh well, ya win some, and ya lose some I guess.

I'm sitting on the edge to see how this story plays out! I do hope it ends with perfectly fitting ringlettes, hon.

 

[52anddone]

I'm sitting on the edge to see how this story plays out! I do hope it ends with perfectly fitting ringlettes, hon.

So do I Kat, so do I.

 

[52anddone]

If the orings are about 22mm wide, I would contact them and tell them they sent the wrong ones, they may well send you a new set out.

Mine didn't come from them.

MVS replied back to my email already, and they want pic's of the box label and the o-rings, No problem with that request. I'll do it sometime today and send it off to them.

 

[52anddone]

I found this Kat & dark_hawk;

SXK Wine tank and AX1 RDA are available. Welcome to enquire and order. #sxk #mako #makoshorty #vape #vapor #vapeporn #vaping #vapegame #vapecommunity #vapefam #vapelife
Skype: allen_shenxingkang
WhatsApp / WeChat: +86 13421337332
Email: allen_shenxingkang@hotmail.com

 

[DPLongo22]

NM

 

[52anddone]

Sometimes, Very Much

 

[Katdarling]

What was the "NM", 53?

 

[DPLongo22]

Sometimes, Very Much

ME TWO! ;-)

 

[52anddone]

What was the "NM", 53?

I forgot

 

[52anddone]

What was the "NM", 53?

BTW Kat, I'm 52. 53 is my brother, but we're not on speaking terms right now.

 

[DPLongo22]

BTW Kat, I'm 52. 53 is my brother, but we're not on speaking terms right now. [emoji38]

[emoji23] [emoji106]

Sent from my SM-G935V using Tapatalk

 

[52anddone]

I just took a couple of pic's and replied back to MVS about those 22mm "Subtank Plus" o-ring packs that they sent me. So far, so good.