Dual Coil 510 Tank Cartomizer, 3.5ml or 5.0ML & the Chuck....

Discussion in 'Thag Built / The Chuck' started by Pedro A. Morales, Dec 27, 2011.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Pedro A. Morales

    Pedro A. Morales Senior Member ECF Veteran

    Joined:
    Aug 14, 2011
    Location:
    Orlando, fl
    Has anyone try these Tanks from madvapes.com? I wanted to try them as I've heard mostly great reviews about them, I eventually want to get a SS DCC Map Tank, but can't spit out the $50 for now. These are $11-$13 and don't leak. I know the chuck's 2.85" I'm trying to find which of the 3.5ml or 5.0ml Tanks are closer to the size of the Chucks body, I don't want anything to Wide or Narrow. For all the Chuck Heads that have some kind of Tank on there Chuck do you recommend The 510 Modders Connector/adapter from avidvaper, I don't want an adapter too Long as to leave a Gap, does anyone know if I should get Closed or Open adapter as there is an option, I'm guessing Closed? Here is the Links

    Dual Coil 510 Tank Cartomizer, 3.5mlDual Coil 510 Tank Cartomizer

    http://www.avidvaper.com/products/510-modders-connector.html

    I
    really need help on this, please if anyone knows, please give me some advice, I want to take My Vaping to the Next step, I might even switch over to 6V, I hope 1.5 DCC are a good fit for that!

    Thanks Peeps!!

    Pedro
     
  2. AmyB66

    AmyB66 Ultra Member ECF Veteran

    Joined:
    Feb 4, 2010
    Location:
    In A Padded Cell
    I have the original map tanks. To me, it was a fun novelty and nothing more and I had such a hard time pulling out the ce2's to replace them that I gave up on them fast. Have your tried dual coils yet? They work best on high voltage, I use mine at six volts. Key is to keep them wet, don't let them dry out. For ease, get rid of the rubber top, replace with a drip tip. That is almost skipping a level because the TH is wicked. The tank's benefit is not having to top off but since the xl cartomizers seem to hold so much liquid in the first place, I don't see the big advantages to the tank.
     
  3. Pedro A. Morales

    Pedro A. Morales Senior Member ECF Veteran

    Joined:
    Aug 14, 2011
    Location:
    Orlando, fl
    Thanks Amy, do you remember which adapter you used, and did it leave much of a Gap? Thanks.

    Pedro
     
  4. AmyB66

    AmyB66 Ultra Member ECF Veteran

    Joined:
    Feb 4, 2010
    Location:
    In A Padded Cell
    I got it at cov, it's a bit obnoxious. I know there is a shorter one out there, however, if you plan on getting more chucks and really really like the tanks there is an adapter free solution.:2cool:

    [​IMG]
     
  5. Pedro A. Morales

    Pedro A. Morales Senior Member ECF Veteran

    Joined:
    Aug 14, 2011
    Location:
    Orlando, fl
    Oh, I want more chucks, I think I seen a picture of that on another thread, but I like that lil Spill zone lol. I got a Modders Connector, sealed, someone recommended it on another thread. I ordered 6V batteries, My3.7 went to crap on me. I ordered a 4Ml Tank, I'll see how that works for me.

    Pedro
     
  6. dxology

    dxology Senior Member Verified Member

    Joined:
    Apr 9, 2010
    Location:
    alabama
    I ordered the 3.5 ml dual coil tank for my little chuck. I have a 901 chuck so I had to get an adapter. It is a little smaller in width than the chuck. I vape at 3.7v and so far I'm loving the combo. I'm getting tons of vapor production and not having to drip liquid all the time is great.
     
  7. Pedro A. Morales

    Pedro A. Morales Senior Member ECF Veteran

    Joined:
    Aug 14, 2011
    Location:
    Orlando, fl
    Thanks Dxology, I got the 4ml Smok Tank from evaporclouds, awesome customer service. It fit's without and adapter, but I did order a Modders Connector Closed Seal from avid Vapor. Chuck and Smok Tank.jpg Chuck and Smok Tank 2.jpg

    I've now noticed that My Chuck the connector must be slanted, actually I noticed that with My Atty's & Carto's but it's driving me crazy with the Tank. I thought My Batteries were crapping out but it's not that. I cleaned My Chuck with Contact Cleaner and now it's working, but after a few days it goes back to Crap. I might have to send my Chuck back for repairs :(

    Thanks again!

    Pedro
     
  8. BiancaMontgomery

    BiancaMontgomery SQUIRREL! Verified Member ECF Veteran

    Supporting member
    Joined:
    Jan 27, 2010
    Location:
    North Carolina
    Well, the tank looks sharp on it...minus the slant :glare:. It would make me nuts too. :(
     
  9. Pedro A. Morales

    Pedro A. Morales Senior Member ECF Veteran

    Joined:
    Aug 14, 2011
    Location:
    Orlando, fl
    I wonder if the slant can have something to do on the inside with My problems, I'm going to write Jeff this weekend, I think I have to send it back :( I just have to get an Ego-T for a replacement before I do. :::Sigh::: this sucks I just got the tank & have 6V Batteries coming, but I think it needs to be done.
     
  10. BiancaMontgomery

    BiancaMontgomery SQUIRREL! Verified Member ECF Veteran

    Supporting member
    Joined:
    Jan 27, 2010
    Location:
    North Carolina
    Yeah, back up PV's are GOOD! :) Hopefully you get your baby back quickly. (((Pedro)))
     
  11. Pedro A. Morales

    Pedro A. Morales Senior Member ECF Veteran

    Joined:
    Aug 14, 2011
    Location:
    Orlando, fl
    Hi Bianca,

    I just wrote Jeff, so hopefully I'll here back soon. I get My 6V tomorrow, so that blows lol. But Jeff did an outstanding Job, just before the Holidays & I got it in 2 weeks, so I can't complain, plus I don't know what's wrong. I'll let the Master diagnose it. I got a VV Ego-T today, My Local Vape guy, was going to swap it out for another 900 MAH Ego T battery, but instead he let me give him a few bucks and I got a VV Ego-T Love it! Going to be My Stealth Vape.So hopefully I'll have My Chuck Back soon. Here are some Picks!

    VV EGO T.jpg

    And My Spartan Chuck with 510 Modders Connector from Avid Vaper & SS Ming

    Spartan Chuck.jpg

    We'll see what happens.... Happy Vaping Everyone! :vapor:

    Pedro
     
  12. BiancaMontgomery

    BiancaMontgomery SQUIRREL! Verified Member ECF Veteran

    Supporting member
    Joined:
    Jan 27, 2010
    Location:
    North Carolina
    Yay for back up! :D
     
  13. Pedro A. Morales

    Pedro A. Morales Senior Member ECF Veteran

    Joined:
    Aug 14, 2011
    Location:
    Orlando, fl
    Well, I sent My Chuck today to Jeff, I miss it already lol, & I got My Tenergy LiFePO4 RCR123A's today, ugh lol. Can't wait to have my Chuck back in Hand. At least My VF4 is Steeped and good to vape now.... So I got that going for me lol

    Happy Vaping!!! :vapor:

    Pedro
     
  14. Rodney Conforti

    Rodney Conforti Senior Member Verified Member ECF Veteran

    Joined:
    Sep 3, 2010
    Location:
    Chicago, Illinois, United States
    I have an M1 tank on one of my Chucks and an Easy Tank on my other Chuck
     
Thread Status:
Not open for further replies.

Share This Page