Help! HH.357 is 'spitty'

Discussion in 'Atomizer Issues' started by AnthonyB, Dec 21, 2011.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. AnthonyB

    AnthonyB Ultra Member Verified Member ECF Veteran

    Supporting member
    Joined:
    Jul 5, 2010
    Location:
    Sydney Australia
    Hey all,

    I just recently purchased 2 of the HH.357s from Avidvaper. One is the hybrid 901/306 and the other is the 510/306. They vape well and yet, initially, I am a bit disappointed. I also got my first Cisco Spec 306 in the same order and that is producing more vapor. I expected the hybrid HH357s to perform better than a standard 306 I paid $8 for compared to the $21 I paid for the Hybrids.

    The worse thing though is the spittiness! I can't take a solitary draw without getting juice spitting into my mouth! Now I wish I purchased the long barrel atty. Though, surely, even the standard barrels shouldn't be spitting like this? I am finding myself taking slower draws to avoid the spitting effect which is unfortunate because this atty is designed to perform optimally with a bigger quicker draw to activate the vacuum effect.

    Though, I think I am doing something wrong and there is nothing wrong with the atomizer. Both atomizers did the same thing. I am not sure what it is. I followed all of Hannah's instructions. I started with the 5-6 drops, cold draw, listened for the gurgle and then added a couple of extra drops. I followed the instructions to the letter.

    I know these atty's come with a learning curve but I am not sure what I am supposed to be doing except to put in just enough drops and top up when i notice the atomizer is starting to dry out.

    Is it just getting the 'right feel' about this atomizer or is there some other major oversight I am making?

    Regards

    Anthony
    :blink:
     
  2. Switched

    Switched ECF Guru ECF Veteran

    Joined:
    Feb 18, 2010
    Location:
    Dartmouth, NS Canada
    They like to spit and yes reduce the amount of drops per refill.
     
  3. jkoppk

    jkoppk Super Member ECF Veteran

    Joined:
    Apr 16, 2011
    Location:
    hanover,PA.
    Mine did the same thing for the first day or two until broken in.To avoid juice in the mouth and still draw hard like the atty wants I used the cap that comes on standard 510 attys when you get them instead of a drip tip until they were broke in and no longer spitting.
     
  4. AnthonyB

    AnthonyB Ultra Member Verified Member ECF Veteran

    Supporting member
    Joined:
    Jul 5, 2010
    Location:
    Sydney Australia
    That sounds like a nifty idea Jkoppk. I like it! I've got many blank cartridges I don't think I will ever use. What a blast from the past and how odd to be using old 510 black cartridges on my new shiny $22 atomizer!

    Mine is leaky as well. From all that Hanna has said, they shouldn't leak. This is meant to be one of the real benefits of this atomizer, yet mine leaks like an 801. Surely breaking it in won't stop leakage? Am I overfilling it? Should the coil cup be wet? Usually, when I see the cup the coil sits in dry, I will put more drops in until it is moist again. Is this correct?

    Anthony
     
  5. Dimitris

    Dimitris Super Member ECF Veteran

    Joined:
    Apr 14, 2011
    Location:
    Georgia
  6. pmoraldo

    pmoraldo REO Guru Verified Member ECF Veteran

    Supporting member
    Joined:
    Jul 23, 2011
    Location:
    Gilbert, Arizona
    mine usually only spits when its flooded. i dont believe the cup should be full of juice
     
  7. 4mudski

    4mudski Super Member Verified Member ECF Veteran

    Joined:
    Feb 28, 2012
    Location:
    Ohio
    I myself bought a hh 357 and thought I had a dud, juice spitting,small clouds of vapor. Give it about 2 day's to brake in. Put 2 drops in, and with no power, draw on it till the gurgle sound goes away then hit that bad boy!! It works great for me!!
     
  8. Matthew Shelbourn

    Matthew Shelbourn Unregistered Supplier ECF Veteran

    Joined:
    Dec 23, 2011
    Location:
    Arcadia, California, United States
    Yeah give it time. It needs to break
    In and u need to learn how to use it. It's very different from a normal 510 or 306 in the way u drip and hit them. It's hard to explain. I always drip 3 drops. And I know it's ready to dry hit when I no longer hear a slight gurgle.
     
  9. Matthew Shelbourn

    Matthew Shelbourn Unregistered Supplier ECF Veteran

    Joined:
    Dec 23, 2011
    Location:
    Arcadia, California, United States
    Oh and is should say they are going on about 6 months with a hot water cleaning every couple of weeks
     
  10. RiPTrippers

    RiPTrippers Unregistered Supplier ECF Veteran

    Joined:
    Mar 17, 2012
    Location:
    North Carolina
Thread Status:
Not open for further replies.

Share This Page