iJoy Tornado Nano w/ Chip Coil

[franck]

By the way it now pops when am firing it,and that's when it's tightly wicked or just snug,either way this thing is just noisy and just not performing very well at all,I tried setting the coils close to the air holes,noise still there,I tried moving them up a bit higher,noise still there,I either got a bad tank or am just too lame to get that thing too work,not sure witch,lol

 

[franck]

Congrats afcarmona,am glad to hear that you finally received you're tank,but most importantly that it's working well and you're enjoying it,nothing is more annoying then waiting for something and then not being happy with it,enjoy it and vape safe;-)

 

[suprtrkr]

Hi everybody! I just got a response about spares for the Nano:

(replace chip coil) Search results for: 'IJOY Tornado Nano'
(color changing glass) Accessories - EightCig
(color changing glass&replace chip coil) Search results for: 'ijoy'
(color changing glass&replace chip coil) √ Search results for: 'ijoy'

Hope that helps!

 

[Afcarmona]

It's kinda turned over - I'm playing around trying for something over .3 ohms so my okr10 ranger can handle it safely - s316l - 10 wraps spaced - 26 gauge - wicked with rayon - I'll see how that works out in the real world at work tomorrow - kinda a shame cause my previous build was pretty spot on --- but I feel the need to wrap coils lol - I still need to try the "chip coil"

Vape safe
Tonyc

 

[suprtrkr]

View attachment 570033 It's kinda turned over - I'm playing around trying for something over .3 ohms so my okr10 ranger can handle it safely - s316l - 10 wraps spaced - 26 gauge - wicked with rayon - I'll see how that works out in the real world at work tomorrow - kinda a shame cause my previous build was pretty spot on --- but I feel the need to wrap coils lol - I still need to try the "chip coil"

Vape safe
Tonyc

I feel the need to wrap coils too. I was amazed how much liked the chip coil.

 

[cigatron]

Yeah, the chip coils ARE spectacular. Still haven't built on the rba. I suppose when I do I'll go with 3mm or larger dia to help fill the monster juice channels.

Thanks for the links @suprtrkr

 

[Afcarmona]

I just went and built a 3.5 mm ss316l 26 gauge - 11 wraps spaced dual coil (I know - I rebuild on it everyday ) - big improvement on the last build (previous build was using a 3mm mandrel) - running it at 65 watts 480 F on a Dna200 - and 4.7 volts on the non tc ranger okr10 mod - really liking this ...

Vape safe vapefam

Tonyc

 

[jseah]

I need to try winding a 3.5 mm coil.

 

[TheBMP]

Got mine today and so far im really impressed by it. im using the coilhead cause why not, i have my own builds in my other attys. I trimmed the cotton a bit and for a prebuilt coil it really performs well.

Good flavor good clouds easy topfill and smoooth airflow. If i can get the rba to be as leak free as this is right now this might take the spot of my griffin 25 as the main tank. Only thing i wished they included is the chuff cap. the driptip is REALLY short and it feels kinda strange pressing the entire top against your mouth.

At a german online shop (which are damn expensive compared to even us pricing usually) i just paid 25€ for it which is a steal. If they properly support it with maybe some fancy coils like geekvape is doing now with their eagle this really could be the next big thing for people looking for a smallish performance monster.

Ill report back once i got more to say about the rb deck.

 

[Petabread]

This is a really nice tank when it's not ...... down the side of my mod. PITA to wick!

The next iteration needs a JFC of some nature.

 

[HalfBaked]

Got mine today and so far im really impressed by it. im using the coilhead cause why not, i have my own builds in my other attys. I trimmed the cotton a bit and for a prebuilt coil it really performs well.

Good flavor good clouds easy topfill and smoooth airflow. If i can get the rba to be as leak free as this is right now this might take the spot of my griffin 25 as the main tank. Only thing i wished they included is the chuff cap. the driptip is REALLY short and it feels kinda strange pressing the entire top against your mouth.

At a german online shop (which are damn expensive compared to even us pricing usually) i just paid 25€ for it which is a steal. If they properly support it with maybe some fancy coils like geekvape is doing now with their eagle this really could be the next big thing for people looking for a smallish performance monster.

Ill report back once i got more to say about the rb deck.

Can you tell me the name of the german shop please?

Gesendet von meinem D6603 mit Tapatalk

 

[cigatron]

A little update. I still haven't needed to build on the rba. The factory coils are still going strong re-wicked with rayon. I run them between 85-95w comfortably with no dryhits....ever. Stellar vapor and flavor production. With the last rewick I vaped 175ml before needing to dryburn and rewick.

No buyer's remorse here but there are a couple of changes I would like to see on the next revision. A 5ml or larger tank and a sliding top fill door would be nice.

 

[TheBMP]

Can you tell me the name of the german shop please?

Gesendet von meinem D6603 mit Tapatalk

dampfer-taxi . think i paid 26. its at 26.95€ now.

chip coil also still doing decently well for me. using my griffin for work cause of more juice and splitting home vape time between the tornado,griffin&tsunami. wanna see how long they last but with my rather "clean" liquid it seems that after a good 80ml it barely changed

 

[TheBMP]

Ok couldnt wait anymore. chip coil was still doing fine but wanted to try the rba.

Threw 3mm id premade kanthal clapton wire coils in there and wicked it with rayon. First went with a more griffin style of wicking. And damn that thing leaked like hell on filling and even slowly after that. It got better after the first fill but still was far from ok.
Opened it up again and just tried to push the rayon deeper and more compact into the channels. Right now its pretty much dry all around. the wick in the coils still gets some oversaturation while filling which isnt too nice with that... average.. premade clapton wire but thats pretty much it.
I think it should be way easier to keep it dry with cotton which just wicks slower and expands in the channels.But i love my cheap dm rayon balls ;P

Ofc with those huge channels dry hits just dont happen and i can pretty much suck the the tank dry to the last drop. Also plenty space on the deck ,easy to build and for a first time wick just needing one adjustment to make it work properly really is pretty damn good.

Think its the best performance/price tank i have with damn good chip coils as a easy option.(and i still hope they bring out fancy chip coils eagle style)

 

[DP2Raja]

Just got mine today. $18.99 on eBay. Just using the RTA deck right now. Fused claptons. 4 Wraps. 0.24 ohms. Running it at 50 watts. Nice. No leaking all. Using the black glass (just for fun) and it goes frosty pretty fast so it is easy to see the juice level. Decent flavor and to me it is an easy build and wick.

 

[cigatron]

Just got mine today. $18.99 on eBay. Just using the RTA deck right now. Fused claptons. 4 Wraps. 0.24 ohms. Running it at 50 watts. Nice. No leaking all. Using the black glass (just for fun) and it goes frosty pretty fast so it is easy to see the juice level. Decent flavor and to me it is an easy build and wick.

Hey all right, glad you like it. How about uploading some pics.
I'm still rewicking the original chip coil with rayon and blasting away at 98w. Haven't touched the rba yet.

 

[DP2Raja]

Cig, I will take some pics of the build when I rewick later today or tomorrow. Here is a pic of the little guy on the Fuchai 213

 

[DP2Raja]

Here you go Cig. Let's see if they let me upload these. Last pic shows NO leaking. Can hit it over and over without a dry hit as well. 0.24 ohms @ 55 watts. Can probably go higher, but I like long pulls.

 

[cigatron]

Nice, great pics. Ok, you lit a fire under my ###. Guess I'll build the rba.

 

[franck]

Here you go Cig. Let's see if they let me upload these. Last pic shows NO leaking. Can hit it over and over without a dry hit as well. 0.24 ohms @ 55 watts. Can probably go higher, but I like long pulls.
View attachment 589039 View attachment 589041 View attachment 589043 View attachment 589045 View attachment 589047 View attachment 589049

Hey bud FYI you're in the wrong forum lol,this is for the Sapor rta ;-)