Silver Bullet Atomizers / Carts

Discussion in 'Atomizer Mods' started by justaguy0, Aug 12, 2011.

Thread Status:
Not open for further replies.
  1. justaguy0

    justaguy0 Full Member

    Hey guys,

    So I have a Silver Bullet with 6V mod (the new formula batteris), and I got it with a standard 510 atomizer / cart to begin with just to try it out. It was amazing! However... the fact that I have to drip and top-off the cart every 2 hits is dissapointing. Meanwhile, I've had the Tornado and Tank Mega XL atomizers / carts (meaning I've had just about every combination of these before I got the Silver Bullet... Mega XL Atomizer, LR Tank Atomizers, LR Atomizers, etc.). I tried using that 510 to the Mega adapter, however, within one click of the SB blew out every atomizer even the standard ones.

    I know there's HV atomizers out there, but what it boils down to is... I'm not really sure which atomizer / cart combination I should be using. Ideally I want something that I don't have to refill after 2 puffs on the thing. Any help here? :confused:
     
  2. WillyB

    WillyB Vaping Master

    So you are saying that with the adapter, atties that once worked now blow?

    If these blow, it's quite understandable.
     
  3. raceengine

    raceengine Super Member Verified Member

    I used to love my Omega @6v and from my experience, only the dual coil cartos and CE2 R4 (metal ones with 2.8ohm) lasted quite a bit. One of my CE2 lasted me almost 5 weeks of 6v madness. I've yet to try it with HV atties and all the new CE2 R5 blows in less than a week (some blow the first hit) but one thing I found out is that if you run it with 3.7v for awhile until the coil is not shiny anymore then it can take more abuse from the 6v... just my :2c:
     
  4. VpnDrgn

    VpnDrgn Ultra Member

    At 6v's I was going to suggest the 2ohm DC carto or a 3ohm or higher carto.
    I have seen a couple places that carry 5ohm cartos now.
    A carto tank prolly wouldn't be a bad idea. Vaporessence carries a carto tank called the 5.5ml Phat tank.
    It is the same diameter as a SB.

    FWIW I don't know that I've seen too many users talk about using carts with atties at HV.
    HV usually implies direct dripping.
     
  5. Dudeman

    Dudeman Ultra Member Verified Member

    Regular ~3ohm Boge carto's hit pretty hard at 6V. Just keep 'em wet. Otherwise I used standard resistance 901's and dripped like crazy.

    I used the carto's exclusively for almost a year on my Silver Bullet.
     
  6. webbcm127

    webbcm127 Ultra Member Verified Member

    i use v4l wow cartos in my BB at 6v and they seem to last me about 2 weeks or so before i decide to throw a new one on, granted you need an adapter but well worth it....and plus 1 on the 901 attys...work great at 6v!-))
     
  7. Dj Xy

    Dj Xy I'm winning like Charlie Verified Member

    Supporting member
    I got two weeks out of a 5 ohm attys @ 6 volts, probably woulda went longer had i not debridged and de wicked it
     
  8. alekos557

    alekos557 Ultra Member Verified Member

    I believe that totally wicked has high resistance or high voltage tank attys
     
  9. tj99959

    tj99959 ECF Guru

  10. ARMYVAPR

    ARMYVAPR Super Member Verified Member

    GOOD INFO tj.... I just got my SB ( my first mod) and is good to know what to use with it.
     
  11. santo19586

    santo19586 Ultra Member Verified Member

    thanks for posting , i like to try 6v, sometime, thanks for the info
     
Thread Status:
Not open for further replies.

Share This Page