1. Win Vaping gear! The ECF 15 Millionth Post contest

    We are fast approaching the 15 millionth ECF post and we have a contest to celebrate this huge landmark and amazing prizes to give out to our members! Head over to the official contest thread to see the rules and check out the prizes generously pledged by our registered suppliers on the prize announcement thread.

Some evic mod questions

Discussion in 'New Members Forum' started by dropped9, Feb 14, 2014.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. dropped9

    dropped9 Full Member

    Joined:
    May 17, 2013
    Location:
    NEPA
    Couple of questions for you guys.

    Can the top piece above the head be screwed off so something like a kayfun can be screwed on and mounted flush?

    Also where can I get a smaller body tube that will fit the 18350 battery?

    Anybody mod theirs like this?

    Jason
     
  2. Bill's Magic Vapor

    Bill's Magic Vapor Juice Maker Verified Member ECF Veteran

    Supporting member
    Joined:
    Feb 8, 2013
    Location:
    USA
    You can get different cones for the evic, but you should be able to screw a kayfun on and have it fairly flush, if not perfectly flush. The 510 connection and the top of the cone are almost in sync. Some Kayfun allow you to control the connection and may be perfectly flush for good looks. Also, the evic has many after market tubes and cones. Mine have Kir Fanis tubes and look very nice. I'm not crazy about the slope of the cone on the evic, but it's ok. There are flat top wide cones, though, that don't taper, if you can find them in stock. The evic is a nice APV, though at only 5 volts, a little under powered. Best display around, I think. My two cents. YMMV. Good luck!
     
  3. sdennislee

    sdennislee Super Member Verified Member ECF Veteran

    Joined:
    Nov 23, 2012
    Location:
    Alaska
  4. sdennislee

    sdennislee Super Member Verified Member ECF Veteran

    Joined:
    Nov 23, 2012
    Location:
    Alaska
  5. humpstyles

    humpstyles Ultra Member Verified Member ECF Veteran

    Joined:
    Dec 14, 2013
    Location:
    Pennsylvania
    Which one of these would match the standard factory chrome tube that the eVic comes with?

    https://www.cignot.com/product_p/evc-acy-all.htm

    I just bought one off of eBay from someone who bought it directly from Joyetech, and when I got it, it was a much lighter silver color than the factory tube. It also seemed much more 'brushed' compared to my tube.

    I feel as if the "Stainless Brushed" looks like it would match it, but then again, the one I currently have is more brushed than the factory tube...Would it be the "Stainless Bright"?
     
  6. sdennislee

    sdennislee Super Member Verified Member ECF Veteran

    Joined:
    Nov 23, 2012
    Location:
    Alaska
    The Stainless Bright is a chrome like finish, the Stainless Brushed is is more of a silver brushed.

    I've never seen the chrome battery tube from Joyetech so I can't compare it for you. I have 2 eVic one is black from Ovale and the other is a silver with a brushed/satin finish from Joyetech.

    The Joyetech website shows black and silver tubes but not chrome so I couldn't compare there either.

    I did buy and after market tube set in chrome and the stainless bright end cap from cignot matches it nicely.

    Sorry I couldn't be of more help
     
  7. joshneedham

    joshneedham Full Member

    Joined:
    Feb 21, 2014
    Location:
    Chicago, IL
    I bought the joyetech 'brushed' straight evic top piece from the cignot b&m in my town for $4, and a green 18350 body tube online. I found a great deal on the tubes; actually they are 18350 tubes for the smoktech sid, but they are COMPLETELY interchangeable with the evic head. Picked it up from hoosierecig.com for $8.49 and that includes the battery cap. Most site do NOT include this piece. They have black, pink, purple, blue, orange, silver, and green in 18650, 18500, and 18350 sizes. I'll be ordering more colors, the fit is perfect and there is no gap by the control ring like on some other aftermarket tubes. Here's a pic of my current setup: image-5.jpg

     
  8. vaquino41981

    vaquino41981 Full Member

    Joined:
    Feb 21, 2014
    Location:
    FL
    For the top caps I recently bought a matte silver one from myfreedomsmokes.com for 4usd.

    As for the tubes, I'm currently eyeing the kir fanis telescoping mod. They have the polished ss in stock atm on gr-mods.com, waiting for the brushed ss. Another one is BoD by Leo, also a telescoping tube.
     
  9. Rickajho

    Rickajho ECF Guru Verified Member ECF Veteran

    Supporting member
    Joined:
    Apr 23, 2011
    Location:
    Boston MA
: evic
Thread Status:
Not open for further replies.

Share This Page