Triade DNA200 by lost vape

Status
Not open for further replies.

Infinite

Senior Member
ECF Veteran
Verified Member
Jul 3, 2012
215
201
SF Bay Area, Sacramento CA

Suwat666

Full Member
Jun 23, 2015
38
66
40
Awe man! Thanks. Now I have push myself over the edge to drop the $70 bones they want for it. Judging by the build quality...should not be too hard. Maybe just a few more bits/reviews are in order

Sent from my LG-H901 using Tapatalk
If you do get it, make sure you put some big fatty coils on there. She likes a lot of power being pushed through.
 

Jvincent516

Senior Member
Aug 29, 2015
187
427
37
So after some consideration I decided to get my triade replaced from the place I ordered it because the button would still occasionally stick. All they had left was the yellow leather though so I got that instead of the brown I sent back. I'm very happy I sent it back, it works flawlessly now, plus I'm actually liking the lighter leather. I'm just hoping they actually release the replaceable panels.
 

Eskie

ECF Guru
ECF Veteran
Verified Member
May 6, 2016
16,087
77,744
NY
That looks really nice. I like the black Twisted on top.

I've been having a really fun time with mine. Between the mod itself, and the software, I can play all day and generate all kinds of cool graphs and whatnot. As expected, on my 10 or 11W tootling, my battery has barely dropped in the last 3 days (yes, I did use it as my primary every day). At this rate, I might only have to recharge once a week.

But, now that I have eScribe, tomorrow the SS round and Clapton wires will arrive. Then it's time for TC!

I will say I was questioning myself on spending on this right now given all the other little vape goodies I've been getting. After these few days of use, I feel it's probably the best investment I've made with vape stuff. Sure, I'll get more tanks and maybe one or two more mods for rotation, but this mod and the Evolv chip are terrific. I really don't know if I can buy another mod without a DNA chip in it after this. You really get spoiled.
 

Kinggrond

Senior Member
Feb 17, 2013
73
64
Romania
I really don't know if I can buy another mod without a DNA chip in it after this. You really get spoiled.

I know the feeling, same here! :) Anyway where the DNA200 really shines is TC, for power mode only other chips are more or less just as good.

On the other hand, I'm also waiting for those separate back panels to be released, can't find any useful info on a potential release date. What I'd like to do as well is to wrap one myself with some exotic material - shark skin, ray skin, ostrich maybe? Wouldn't do it to my only available back panel of course... :)
 

Eskie

ECF Guru
ECF Veteran
Verified Member
May 6, 2016
16,087
77,744
NY
Given the the nice work done for the Efusion, and stating there will be new replacement backs coming out, I expect there will be some really nice stuff available. Ostrich would look nice, and maybe a snakeskin or crocodile. I love the Abalone available for the Efusion, but I can't see that working on this back.
 
  • Like
Reactions: BillW50

Suwat666

Full Member
Jun 23, 2015
38
66
40
So after some consideration I decided to get my triade replaced from the place I ordered it because the button would still occasionally stick. All they had left was the yellow leather though so I got that instead of the brown I sent back. I'm very happy I sent it back, it works flawlessly now, plus I'm actually liking the lighter leather. I'm just hoping they actually release the replaceable panels.
That's really sharp, how do you like the TM2?
 

Rafael letaba

Full Member
Jun 18, 2016
31
13
34
Accidentally got juice on my hand while held it. Any cleaning tips?

cf47791b3cbdf75398f0d20247f7791d.jpg


Sent from my SM-N9208 using Tapatalk
 

Eskie

ECF Guru
ECF Veteran
Verified Member
May 6, 2016
16,087
77,744
NY
Accidentally got juice on my hand while held it. Any cleaning tips?

cf47791b3cbdf75398f0d20247f7791d.jpg


Sent from my SM-N9208 using Tapatalk

You could get some saddle soap, or take a look on Amazon for leather cleaners. I'd go with saddle soap myself.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Rafael letaba

Rafael letaba

Full Member
Jun 18, 2016
31
13
34
You could get some saddle soap, or take a look on Amazon for leather cleaners. I'd go with saddle soap myself.


Sent from my iPhone using Tapatalk
Turns out it fades after awhile. Hahaha. Thanks for the answer though. I will be sure to use that info in the future. [emoji3]

Sent from my SM-T715Y using Tapatalk
 
  • Like
Reactions: Eskie

BillW50

Vaping Master
ECF Veteran
Verified Member
Nov 23, 2014
3,429
34,399
US
Turns out it fades after awhile. Hahaha. Thanks for the answer though. I will be sure to use that info in the future. [emoji3]
One video reviewer said the same thing. My yellow one has black from being in the box (it is probably dye) that I have to figure out how to get off. And my red one I use that first pressed extra virgin olive oil on it, which darkened it a lot.

haL37sL.jpg
 

Rafael letaba

Full Member
Jun 18, 2016
31
13
34
One video reviewer said the same thing. My yellow one has black from being in the box (it is probably dye) that I have to figure out how to get off. And my red one I use that first pressed extra virgin olive oil on it, which darkened it a lot.

haL37sL.jpg
Wow. I should be extra carefull then. [emoji5] turns out mine has also a black smudge. Tell me when you get rid of yours. Thanks! [emoji3]

Sent from my SM-T715Y using Tapatalk
 
Last edited:

Rafael letaba

Full Member
Jun 18, 2016
31
13
34
You dont need such a high end mod and attomizer to stop. Heck i started with a pen type worth 20 dollars and it got me to stop. I only upgraded 3 months after with my first tube type mech mod. I will be honest, back when i first started to stop smoking i will always look back on how much i have already spent on vaping gear to discourage my cravings. I advise that you buy him a starter kit and bump the nic to 18mg and let him decide if its for him.

Sent from my SM-N9208 using Tapatalk
 
  • Like
Reactions: Eskie

Rafael letaba

Full Member
Jun 18, 2016
31
13
34
Will this device be nice with a Kayfun V5 ? Just trying to help a family member with a set to get off smokes.
You dont need such a high end mod and attomizer to stop. Heck i started with a pen type worth 20 dollars and it got me to stop. I only upgraded 3 months after with my first tube type mech mod. I will be honest, back when i first started to stop smoking i will always look back on how much i have already spent on vaping gear to discourage my cravings. I advise that you buy him a starter kit and bump the nic to 18mg and let him decide if its for him.

Sent from my SM-N9208 using Tapatalk
 

Telmos

Senior Member
May 11, 2016
82
35
42
You dont need such a high end mod and attomizer to stop. Heck i started with a pen type worth 20 dollars and it got me to stop. I only upgraded 3 months after with my first tube type mech mod. I will be honest, back when i first started to stop smoking i will always look back on how much i have already spent on vaping gear to discourage my cravings. I advise that you buy him a starter kit and bump the nic to 18mg and let him decide if its for him.

Sent from my SM-N9208 using Tapatalk

The thing is that he already had a low end mod with a cheap tank which always leaked, mod had charging issues and he basically gave up after a month and went back to smoking. So definitely don't mind the extra price if it will stick.
 

Rafael letaba

Full Member
Jun 18, 2016
31
13
34
The thing is that he already had a low end mod with a cheap tank which always leaked, mod had charging issues and he basically gave up after a month and went back to smoking. So definitely don't mind the extra price if it will stick.
Why not the rx200s? Basically its all the same except for the chip. This mod is for hobbyists in my opinion. For the tank though, why not buy one with coil heads? Most tanks with pre built coil heads dont leak. I advise the crius (im not really sure about this since im not into pre built coil heads but its recent and it does the job), both of which are below $100. If he doesnt stop smoking at least you didnt spend too much. [emoji3][emoji100][emoji100][emoji100]

Sent from my SM-N9208 using Tapatalk
 
  • Like
Reactions: Infinite

BillW50

Vaping Master
ECF Veteran
Verified Member
Nov 23, 2014
3,429
34,399
US
But those cheap mods don't last Rafae. There are a few posts everyday on Reddit that their RX200 mods crapped out on them. And a few youtube videos about the same too.That is why companies like Joyetech/Wismec sells so many mods and comes out with new models all of the time. They know their mods will crap out for most within months. So they are eager to sell you another cheap crap mod to replace it. It doesn't take long before it was cheaper to buy a more expensive mod to begin with.
 

Rafael letaba

Full Member
Jun 18, 2016
31
13
34
But those cheap mods don't last Rafae. There are a few posts everyday on Reddit that their RX200 mods crapped out on them. And a few youtube videos about the same too.That is why companies like Joyetech/Wismec sells so many mods and comes out with new models all of the time. They know their mods will crap out for most within months. So they are eager to sell you another cheap crap mod to replace it. It doesn't take long before it was cheaper to buy a more expensive mod to begin with.
Hhhmmm its kind of the opposite for my friends. Most of my friends have rx200's and none have issues and some were bought when it first came out till now no issues. [emoji3]maybe it was just luck. Its fine if this is the mod they choose. I just think its too much just to quit smoking. [emoji3] anyway whatever they choose i wish them luck. No matter how expensive the mod or how good the brand, vape stuff are still machines and some have manufacturing issues. Stay safe vapefam. [emoji106][emoji106][emoji38]

Sent from my SM-N9208 using Tapatalk
 

BillW50

Vaping Master
ECF Veteran
Verified Member
Nov 23, 2014
3,429
34,399
US
I don't have problem with my two RX200 either, except for SS TC is awful and TC itself isn't very smooth. My black one the paint chips off very easily and even on the first day. My white/teal one is still chip free. Then there is that problem with the RX200 if you don't like how it vapes... well tough. There is nothing you can do about it except change the TCR value and that is it. And the wiring they use is too thin for 200 watts, let alone 250 watts. So I wouldn't use them up there too long. Heck there was a few reports of RX200 suddenly just smoking in the middle of the night. So I remove my batteries nowadays so I won't die from a fire from a cheap mod. I am sure mine will last for years since they often sit battery-less and off sitting in the corner.
 
Status
Not open for further replies.

Users who are viewing this thread