Search results

  1. bapgood

    Battery holder contact resistance measurements

    Battery holder contact resistance measurements I finally got some battery holders from digikey that I have been asked about several times. BK-18650-PC2 BH-18650-W BK-18650-PC4 Here are the results BK-18650-PC2 Single Contact = 7mΩ BH-18650-W Single Contact = 2.6mΩ BH-18650-W Single Contact...
  2. bapgood

    Faux Touch Switch

    I got some light touch thin tact switches a while back thinking to use them in a pipe build for a lip activated switch. Then I got playing around with an old MVP case, DNA, and some 3M Carbon Fiber Di-Noc sheet. I have too many projects going on right now and I can't find a battery solution...
  3. bapgood

    Battery Internal Resistance Measurements

    Here is some battery internal resistance measurements I got using the Turnigy 7 in 1 from Hobby King. Take notice that I get a significantly different reading when the battery is in a battery holder or even off soldered lead wires. Sony 30a 2000mah 18650 (fairly new) in FT battery holder...
  4. bapgood

    gdeals tricked out Reo - mosfet switch/fusses/lowered atty/etc - PICS :D

    I have wanted to try a Reo for quite awhile and gdeal had been talking to me about vdrop issues and fuse options, so I had him send me his Reo so I could get a test drive and possibly trick it out while I had it. Here is a list of the modifications I did while I had the Reo - Mosfet switch...
  5. bapgood

    gdeals tricked out Reo - mosfet switch/fusses/lowered atty/etc - PICS :D

    I have wanted to try a Reo for quite awhile and gdeal had been talking to me about vdrop issues and fuse options, so I had him send me his Reo so I could get a test drive and possibly trick it out while I had it. Here is a list of the modifications I did while I had the Reo - Mosfet switch...
  6. bapgood

    Anyone experienced painting faux wood grain???

    I have been doing some research on painting faux wood grain, and would like to try it out on some of my mods. I know there is wealth on knowledge here on ECF, so if you have some tips and tricks please post them up. Thanks!!!
  7. bapgood

    Wood Mech Tube - Yay! I made something out of wood that actually turned out!!!

    I have been kicking this idea around for quite a while, but wood and I haven't got along so good in the past. Then I seen this and I had to try it out for my self. Below is my first attempt. Its just an aluminum tube and some oak from lowes for my trial run, the next ones will be stainless or...
  8. bapgood

    Kick 2 sub ohm testing and comparison

    I posted the below in another thread, but I thought you guys that are regulars in this forum might be interested in the info. The test setup was a 0.8 ohm coil in an RSST. Voltage was tested at the coil connection post under load. Mod for the K2 and unregulated was a tried and true bolt with a...
  9. bapgood

    Fistpack-ish 26650 DNA20 Mod

    I decide this beauty needed its own thread. It's beauty isn't necessarily it's external appearance, but its form and functionality. The 26650 is kind of a brute and the mod is noticeably stout and hefty, but not overwhelmingly so. This is basically a test of concept so I wasn't to concerned...
  10. bapgood

    WIP DNA20 Compact 18650 Mod

    I couldn't wait. I think this mod is really starting to come together. I'm not the biggest 18650 fan, but I know I'm in the minority on that.....truth is sometimes they hard to beat. Anyway here she is. It's kind of hard to see but there is just a smidge of taper down to the face. Just enough...
  11. bapgood

    Super Over The Top Fancy DNA20 Tube Mod

    Actually its the complete opposite from the title :D I threw it together to test the size of the mod and to test out the 1000mah Turnigy Nano-Tech battery. 1"x7/8" pollycarb tube....with the ends the total length is 3.5"
  12. bapgood

    DNA20 Screen Cradle/Bezel/Housing Panel Thickness

    Ok by now most DNA20 users that frequent this forum are familiar with the screen cradle I have on shapeways (mamu's design). Mamu's DNA20D Screen Cradle by bapgood on Shapeways My question is if two or three versions for various panel thicknesses would be handy? The current depth for panel...
  13. bapgood

    WIP DNA20 Eclipse Tin Steampunk-ish Mod

    Another mod inspired by mamu....Still WIP but here are some pics.
  14. bapgood

    Suggestions for new modding workbench top material

    I have decided its long overdue to get organized and make a new workbench. I'm thinking some kind of composite that could stand up to a soldering iron touch as well as being non electrically conductive would be great. Not breaking the bank would also be nice. The bench will be ~144"x32" Thanks...
  15. bapgood

    DNA20 Wood/Metal Box

    I figured it was time to quit posting in everybody else's thread and start my own. Here is what I'm going to try to make :D
  16. bapgood

    Tanked Carto VS Genisis Style Aty

    Tanked Carto VS Genisis Style Aty.....Are you getting a better vape from a genisis style aty than a tanked carto? I am relatively new to RBAs but I have tried.... -Horizontal coils with wicks of bamboo/hemp/cotton or whatever comes with the smokteck r-tank. -Vertical coils setup in the genisis...
  17. bapgood

    ScubaQu Issues and Ideas

    I will be putting as much information as I can about the original ScubaQu concept up in this thread. This thread will be to discuss issues and potential design improvements. I have not seen anything to indicate Scubabatdan voiced any ill feelings about his original thread that evolved greatly...
  18. bapgood

    Hello-New to Forum

    For a few posts it looks like I'm stuck in this part of the forum. Not sure what point it serves, but there must be a reason :) I'm kind of impatient, but will make the best out of it.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu