1.5ohm HH.357 with RoughStack V2

[jankhner]

Can I use 1.5ohm HH.357 atomizer with RoughStack V2 or do i need 2 ohm atomizer? i thought 1,5ohm is ok for RoughStack V2 but my fellow forumist from Finnish e-cig forum said that roughstack may be un-regulated (is that the correct word?) and with full battery it gives over 4 volts? I just want to make sure.

Thanks in advance.

 

[PoliticallyIncorrect]

18650 Li-Ions hot off the charger will typically put out more than their rated voltage, but only briefly. They'll settle to their 3.7V norm, then slowly sag into the sunset.

1.5Ω should work fine (3.7V + 1.5Ω = 9.12W). And yes, the Roughstack is unregulated; essentially, it's a battery holder with a switch. Whatever your battery puts out, that's what you get.

Something you might want to consider (if you have the Maxi-Roughstack) is a Kick. For another $45, it would give you a regulated, variable output: http://www.e-cigarette-forum.com/forum/e-cigarette-mods-reviews/284473-kick-evolv.html

 

[jankhner]

18650 Li-Ions hot off the charger will typically put out more than their rated voltage, but only briefly. They'll settle to their 3.7V norm, then slowly sag into the sunset.

1.5Ω should work fine (3.7V + 1.5Ω = 9.12W). And yes, the Roughstack is unregulated; essentially, it's a battery holder with a switch. Whatever your battery puts out, that's what you get.

Something you might want to consider (if you have the Maxi-Roughstack) is a Kick...

Thank you! I have "normal" RoughStack instead of Maxi and therefore 18350 batteries but if i understood correctly it doesn't change the fact that 1.5Ω should work fine with it..?

 

[Tyberias]

Thank you! I have "normal" RoughStack instead of Maxi and therefore 18350 batteries but if i understood correctly it doesn't change the fact that 1.5Ω should work fine with it..?

1.5 OHM is fine on that battery.

 

[440BB]

Both the regular and Maxi handle it well. I get the most consistent vape from AW IMR batteries for LR in these.