100% VG Thickness

Status
Not open for further replies.

Killjoy1

Ω Destroyer
ECF Veteran
Verified Member
Aug 15, 2011
9,304
9,365
46
New Hampshire, US
VG is very thick, true. If you're direct-dripping, this is not an issue at all. If you're using a 510-T, I can tell you that 100% VG will work, I've done it, but it may require periodic cold draws (take a hit without activating the battery) in order to keep the coil wet since it won't wick as fast as thinner juice. Or you can thin your juice a little bit with distilled or de-ionized water (vodka and grain alcohol are also used by some people), 5-10% should be sufficient without affecting flavor or nic strength too much

Hope that helps :)
 

orkira

Ultra Member
ECF Veteran
Verified Member
Oct 12, 2011
2,814
9,220
Virginia

otrpu

Account closed on request
ECF Veteran
Verified Member
May 5, 2010
1,805
586
Colorado
I vape nothing but a blend of straight VG, (from Essential Depot), cut with 25-30% PGA. (Pure Grain Alcohol). VG is thick, even backs up a funnel with an half inch hole in the bottom. Sometimes I cut it as much as 50% of each. I'm now Nic free. I forgot to add the Nic in my blend about 3 weeks ago. Ever since then I've been Nic Free. I only use clear cartomizers or tanks. JMHO

Cheers,
otrpu
 
Last edited:

dormouse

ECF Guru
ECF Veteran
Oct 31, 2010
12,347
1,611
Pennsylvania
What you you mean by dripped? Normally tank attys are not used for dripping. Dripping is using a drip tip on an atomize, normally a standard atomizer though I think some have dripped by removing the spike plate of a T atomizer. Not recommended at all on automatic batteries or any battery with an open hole into the battery on the threaded end.

Re VG, VG can be dripped. You just need patience to let it get to the coil especially if it is a very thick VG. Some vendors pre-dilute VG with some distilled water to make it flow a bit better.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread