19mm clearomizer suggestions...

[lamensterms]

Hi all,

Just wondering if a few folk, more learned than myself, wouldn't mind making some suggestions of 19mm clearomizers to pair up with the Ego One battery.

I have been using the Ego One clearo and the Subtank Nano, which have both been good. Is there any other tanks in the same class as those two?

Looking forward to hearing back.

 

[lamensterms]

Ps, subohm coils are not essential, but I do like the mouth to lung draws & decent clouds.

 

[TLS01]

You could try the eleaf GS-Air M - Eleaf GS Air M - Eleaf Tanks - Eleaf - Clearomizers Tanks
19mm diameter and I have the Air, not M, just ordered this morning, it's a very good tank for under $10 US.

 

[lamensterms]

Thanks TLS, I'll check it out. Not much info online. Any idea if the tank is glass or plastic?

 

[440BB]

I understand the Aspire Vivi Nova BDC glass tanks can use their newer bottom vertical coils, and might be worth a try. I believe they are 19mm diameter.

 

[Richriv]

The joyetech delta 19 is a nice tank. 19mm but as most joyetech products, rather pricey.

 

[Caprilli]

The Delta 19 is quite similar to the ego one tank as regards to draw and Airflow so if you want something a little different the Kanger Aerotank Mow Mega works rather well. Sweet Vapes has those in stock.

 

[lamensterms]

Do you put that on your Ego One Caprilli?

 

[TLS01]

The Eleaf GS-Air M is glass.

 

[WickedWicks]

Nautilus Mini, Beyond Vape Silo Lite.

With a little bit of modification, you can also run the heads of some of the tanks already mentioned in your Subtank Nano:

Subtank Nano fits also:

Kanger BCC heads: file down the heads chimney a little bit so it fits the Nano's shaft , use 2 of the heads plastic caps
Kanger BDC (tested v1) heads: remove the heads chimney (use only the heads plastic cap)
Eleaf GS Air / Joyetech CS: extend or replace plus pin (eg from Aspire BVC), remove the heads plastic top seal

Keep in mind that performance might be a on the weaker side for higher resistance heads. The batteries voltage is fixed, so the higher the resistance the more your wattage will drop.

 

[lamensterms]

Hi WickedWicks, thanks for the info. Considering the Ego One works quite well in the 0.5 to 1.2 ish range, I'd probably stick around there. Otherwise the performance will suffer (as you say).

 

[Caprilli]

Do you put that on your Ego One Caprilli?

Yes I do but I do not use Kanger stock coils. I buy the old protank coils from fasttech and use an additional silicone spacer on the chimney whilst using cotton and pre-wrapped coils in the heads. Works really well and gives the Kanger Tanks a whole new lease of life.