3.8 volts satisfying enough or what?

[Jellyfish]

3.8 volts might be satisfying to you...and then again, it might not be. It depends on the resistance of your delivery system and to a degree the juice that you're vaping...along with your personal preferences.

I've got a decent mod and with the different things I've got mounted to it I'm usually in the 3.7 to 4.1 volt range. Not always...but USUALLY. However, I find that I can sometimes improve the taste of my juice by making a 0.1 - 0.2 volt change. So in that regard, when I recommend anything I always stress the flexibility of a device with variable voltage. YMMV.

 

[djensen9367]

I use variable wattage, usually at 6 watts, that with my various tanks keeps me in the 3.6-4.2 volt range, I mostly do fruit juices and they will taste burnt if I go any higher. A lot of people say they vape at 8+ watts, I can't go that high with my juices. The nice thing about a variable, be it vv or vw they usually deliver the precise hit every time until the battery goes out. 3.8 is good if you can actually maintain that.

 

[Rocketpunk]

I buy the same hardware as my fellow vapers at work, i.e., LR 2.0 ohm flanged cartos, 1.5 to 3.0 ohm atomizers, etc., and a LOT of them have their pv's cranked up to the max.

I see them puffing away happily with no complaints.

But gad forbid if I raise my Twist to 4.2 volts. My butterscotch... all my sweet flavors... taste nasty. I'm sure it's the juice, but I still can't figure out how my coworker can drip in a 2.0 LR atomizer on a crack-fiend basis with his Kgo VV set at 6.0 volts and his Twist at 4.8 volts. And not be disappointed or taste burnt poop.

 

[Orobas]

it's satisfying enough for me with an atty around 2-2.4 ohms. I have a few variable voltage devices but seldom are they bumped up much higher than that.

 

[Translations]

For tobacco flavors I always have mine set at 4.0 or lower, its just way to harsh for me over that. But for stronger non tobacco flavors I set at around 4.0 - 4.2 volts to get the flavor. It also depends on what atty your using, 2.4-3.0 ohms seem to work the best for me.

 

[denali_41]

a year ago ,,the hype here was vapin at 6-7.2 volts..then people started figuring out that was just too much heat

 

[zapped]

I like mine at 4.2-4.4 volts

 

[mikejm]

3.8 volts satisfying enough or what?

For a LR atty. But then you get tired of burning up atties and draining batts so you go with high volts and high ohm atties to get the same wattage as 3.8 on LR.

It's about wattage and the wattage depends on the juice and the user.

 

[studiovap]

What's the point of the question? Are you vaping at 3.8 volts? Are you satisfied? Or what?

LOL kiwivap, what's the saying, better to keep quiet and be thought a fool than open a thread and remove all doubt

 

[rotku]

Studio, very funny. An Aussie dropping a Abe Lincoln/ Mark Twain quote.

 

[mikejm]

LOL kiwivap, what's the saying, better to keep quiet and be thought a fool than open a thread and remove all doubt

No.You need 6 volts. Get a Provari.

 

[studiovap]

No.You need 6 volts. Get a Provari.

*#*&$### do I , not with running 9 genesis attys with 28g kanthal, I like the idea of a provari, but It sucks at low Ohm genesis'.and is twice the size of my Paps Mech mod.
As has been stated several times It's not about voltage it's about watts, and great genesis setups need watts not volts, to run anything the provari would handle would sill be limited to 14.5watts.

 

[MaxUT]

"Let us be thankful for the fools; but for them the rest of us could not succeed." --Mark Twain

 

[studiovap]

This should help carto and clearo users with the relevance of voltage :
https://store-549f5.mybigcommerce.com/product_images/uploaded_images/voltagechart-lg.jpg

 

[denali_41]

*#*&$### do I , not with running 9 genesis attys with 28g kanthal, I like the idea of a provari, but It sucks at low Ohm genesis'.and is twice the size of my Paps Mech mod.
As has been stated several times It's not about voltage it's about watts, and great genesis setups need watts not volts, to run anything the provari would handle would sill be limited to 14.5watts.

tell us gain how your atty don't need any voltage :d


http://www.e-cigarette-forum.com/fo...-not-matter-its-all-about-wire-temp-read.html

 

[studiovap]

tell us gain how your atty don't need any voltage :d


http://www.e-cigarette-forum.com/fo...-not-matter-its-all-about-wire-temp-read.html

My attys don't need volts.
They run on pixie dust, old beetles and watts

 

[denali_41]

My attys don't need volts.
They run on pixie dust, old beetles and watts

wow,,just thin how much better it would be if you got a real mans pv !!

 

[studiovap]

wow,,just thin how much better it would be if you got a real mans pv !!

YOU don't need a Provari to be a real man IMHO, I have a Zmax that will go to over 20watts, but it's to large to be comfortable with out of the house.

 

[denali_41]

Provari

now why did you have to go and do something like that ??

got a little P_____ envy do we

 

[studiovap]

now why did you have to go and do something like that ??

got a little P_____ envy do we

P envy not so much LOL, THE MORTAR........ Solid Brass construction with copper post contacts.just pure raw power !!!!, well that's a different matter