.3 quad parallel BEAST mode

[juggalofisher88]

Ok got a quad parallel working now.
28g 5wraps around 2.4mm came out to .3ohms wicked with a snug peice of sheisdo cotton.
And I am impressed, of course it preformed better than a normal quad coil with the shared heat and what not.
Here have some pics (got my phone working that has a good camera so I can finally take pics! Should prolly slow down)

If you try it let me know how it went, thinking of trying 6strands in parallel..... sometimes I have to much time on my hands

 

[SLIPPY_EEL]

Good job man!

i had to make one to



vapes good, i kinda rushed it and ended up with two gaps though and i dont really bother scrunching anymore as it only raises the ohms, i think it was on a 2mm id though, it ended up 0.22Ω

 

[juggalofisher88]

Nice is that the magma?
I got my on a igoW lol with one slot airhole but its not enough air flow for me with that coil gonna have to widen it up lol.
I just ordered a 3d dripper just because I have a nemesis lol, and a 1:1 cats rda clone (they're all clones) the chamber looks tiny hoping the flavors good. Almost got the magma clone instead but I wanted a dedicated quad atty

 

[SLIPPY_EEL]

yes mate, magma, i just grabbed the first atty that i saw in my jar of air drying and dust collecting worthy atty's... alot of people really like it, i prefer the w6 or tobh are lighter and cool quicker, all depends on the build, i like atty's i can do almost anything with, cant put nano's on a cloud with it either.

i can only afford clones to

 

[FictitiousFreedom]

Niice, I tried this once with 24g In my atomic and it didn't ever amount to anything, I'd really like to try 2 seperate tri parallels but I don't think any of my rdas could handle it, another reason I really want a mephisto. Good work man, its always good to see a new coil.

Sent from my PC36100 using Tapatalk 2

 

[juggalofisher88]

Niice, I tried this once with 24g In my atomic and it didn't ever amount to anything, I'd really like to try 2 seperate tri parallels but I don't think any of my rdas could handle it, another reason I really want a mephisto. Good work man, its always good to see a new coil.

Sent from my PC36100 using Tapatalk 2

You mean one of these

Its 28g dual triple in my TOBH with post hole drilled out.
But as you can see one sides hotter than the other gonna they and fix it later
This this is kicking my a** hard lol
Sent from my SGH-S959G using Tapatalk 2

 

[FictitiousFreedom]

Hell yeah, not bad. Triple parallels arnt easy to get perfect so I'm sure its pretty hard to get them to heat evenly together.

Sent from my PC36100 using Tapatalk 2

 

[juggalofisher88]

Hell yeah, not bad. Triple parallels arnt easy to get perfect so I'm sure its pretty hard to get them to heat evenly together.

Sent from my PC36100 using Tapatalk 2

I finally did it 30minutes with the bit i wrapped it on and needle nose pliers but i got them heating together, should of took some pics when i was rebuilding it crap... Lol

 

[Froth]

You mean one of these

Its 28g dual triple in my TOBH with post hole drilled out.
But as you can see one sides hotter than the other gonna they and fix it later
This this is kicking my a** hard lol
Sent from my SGH-S959G using Tapatalk 2

I'll one up that Triple parallel 26ga duals, 7 wraps each, 1.5mm internal coil diameter, .14 ohms.

PITA to build, but it vaped really well, quite the hot vape(that's kinda my thing anyway, so I liked it).

 

[juggalofisher88]

I'll one up that Triple parallel 26ga duals, 7 wraps each, 1.5mm internal coil diameter, .14 ohms.

PITA to build, but it vaped really well, quite the hot vape(that's kinda my thing anyway, so I liked it).

Dang them are some pretty coils, need to get me one of.them T-post attys specifically that plum veil lol.
.14 is a little warm for me, how long a.battery last you?

 

[CRW78]

Holy cow man! I'd expect a higher resistance than that with 22 coils. Lol!

Juggalo: I'm usually at that or lower and my trustfire 26650 7v 5000mah will run for about 2 hours before drop off.

 

[juggalofisher88]

Holy cow man! I'd expect a higher resistance than that with 22 coils. Lol!

Juggalo: I'm usually at that or lower and my trustfire 26650 7v 5000mah will run for about 2 hours before drop off.

His is 21wraps a side lol mine was 18wraps aside with smaller kanthal and larger Id but you gotta remember its technically 6 coils with each coil significantly reducing the total ohm load

Also 26650 are not 3.7-4.2v like 18650s? Or is it just certain models?

 

[Froth]

Dang them are some pretty coils, need to get me one of.them T-post attys specifically that plum veil lol.
.14 is a little warm for me, how long a.battery last you?

With that .14 build, I was changing the battery out at 3.9 volts, which took about an hour with a VTC5 with moderate vaping. You're right on about the resistance, it's basically like building six coils of that size, so the resistance will be six times lower than a single coil of the same size. Heat up time was basically instantaneous which is impressive with almost 2 feet of wire crammed in there. The T-post positive block is awesome, really allows for some variety with builds. The RDA pictured is a Raiju Clone which I've really grown to love.