510 atty driving me crazy

[rbrtito]

so i have a couple of issues with my 510 atty. I'm using standard 510 attys, but 1) my attys are dripping 2) attys taste burnt even though i have primed it and re put the carto back on 3) using blue foam mod i turned the cart upside down and dropped about 11-15 drips and then put the blue foam in and the juice was gone with 2 hours?

Things that i tried doing:
cleaning the atty out
blowing the primer out
put 2-3 drips on the atty before i put the carto back on
putting 11-15 drops in the cart then putting the blue foam in
dripping the liquid right onto the blue foam

Ive tried a lot but it seems like im doing something wrong? any help work be great so i can get this ego working right!

 

[mwa102464]

xxxxxxxxxxxxxxxxxxxxx

 

[mwa102464]

2hrs, I can go through 15 drops in 10 min, you need to try those Atty with a drip tip and get rid of that blue yukky stuff , you also may not have enough Batt power for that Atty, if your using a standard ohm Atty they really work best from 4v-4.6v so you may want to try an LR or like I said some higher Batt power voltage as well. The blue foam also has a nasty taste when it burns and I really dont think it can be to good for you either. Try one of my suggestions and report back to us here

 

[rbrtito]

i use a drip tip when im at home but when im on the road i like to use a cart. do you have any other suggestion on anything other than blue foam?

 

[pipecleaner]

I pulled the cottony stuff out of my cartridge ends that would't drip. I cut up a piece of green scotch pad and filled the ends. This stuff is open enough to drip. Heat doesn't seem to bother it. If I feel I'm approaching flood I insert an empty cartridge for awhile. It works.