A true convert

[shatner]

I was a die hard PTB cart modder. Until I got sick of buying teabags. Then I ran across Super T and the Stainless contoured drip tips. I use a Tornado and a PS 5v pt at home.

Wow! It's so much easier just dripping 3 or 4 drops of my favorite juice straight in, no messing around. And even better, that amount of drops equals about 1 analogue. So it's much easier to tell when to put it down.

If you don't have one you're missing out.

 

[martha1014]

I have a brass on but then I found the delrin t-tips. I didn't really like the taste of metal in my mouth or the weight of the metal ones. The delrin ones are great. They are much easier to get off and on the atomizer. They are also cheaper.

 

[bearscreek]

I want to be a convert, too, but I'm having a terrible time deciding which kind I want. I have a feeling I'd end up agreeing with Martha about the delrin, though, but the SS looks SO nice.

 

[PaulB]

I can never remember which plastic is which. I'm inclined toward a plastic T-tip, but one annoyance I've occasionally had with the stock 510 cartridge tips is when they melt a bit at the atty end and start looking chewed up around the edge. Is Delrin something else--something more heat resistant? Hard or soft plastic?

 

[forcedfuel50]

Delrin is just another form of plastic, very similar to Nylon, which is also a form of plastic. Delrin is what i would describe as a "harder" plastic. It's not a soft type plastic which makes it quite machinable in a lathe.

 

[forcedfuel50]

I was a die hard PTB cart modder. Until I got sick of buying teabags. Then I ran across Super T and the Stainless contoured drip tips. I use a Tornado and a PS 5v pt at home.

Wow! It's so much easier just dripping 3 or 4 drops of my favorite juice straight in, no messing around. And even better, that amount of drops equals about 1 analogue. So it's much easier to tell when to put it down.

If you don't have one you're missing out.

The stainless are my favorite too, they may cost a bit more, but they'll last forever!

 

[shatner]

I bought the stainless, not just because it looks clean on a black tornado, but also, as stated above, will last forever.

Ok. I went back to PTB moded carts lastnight for a bit, just to see if I really liked dripping more. Holy Jeeze. I do. And it's just so much better, especially on a HV device like the Puresmoker PT. Incredible.

 

[PaulB]

OK--I'm done licking my wounds over repeatedly missing the free offer postings a few weeks ago ( ) and just put in an order for a pair of 'em.

 

[shatner]

OK--I'm done licking my wounds over repeatedly missing the free offer postings a few weeks ago ( ) and just put in an order for a pair of 'em.

Awesome! Which kinds did you get? You'll LOVE 'em.

 

[PaulB]

Awesome! Which kinds did you get? You'll LOVE 'em.

A couple of the Delrins. Am looking forward!

 

[redrhino]

I was a die hard PTB cart modder. Until I got sick of buying teabags. Then I ran across Super T and the Stainless contoured drip tips. I use a Tornado and a PS 5v pt at home.

Wow! It's so much easier just dripping 3 or 4 drops of my favorite juice straight in, no messing around. And even better, that amount of drops equals about 1 analogue. So it's much easier to tell when to put it down.

If you don't have one you're missing out.

 

[redrhino]

I want to be a convert, too, but I'm having a terrible time deciding which kind I want. I have a feeling I'd end up agreeing with Martha about the delrin, though, but the SS looks SO nice.

As Long as you convert to dripping you'll be ok.....Deciding which T-TIP to get is the easy Part.....Good Luck..... And welcome to the Dripers/T-TIP world

 

[redrhino]

OK--I'm done licking my wounds over repeatedly missing the free offer postings a few weeks ago ( ) and just put in an order for a pair of 'em.

Welcome to drippers world...You'll Love it

 

[shatner]

Make sure to let us know how the Delrin tips are. I'm using the stainless mainly on my PS 5v passthru. I really want a Delrin tip for my Tornado/eGo.

 

[PaulB]

Make sure to let us know how the Delrin tips are. I'm using the stainless mainly on my PS 5v passthru. I really want a Delrin tip for my Tornado/eGo.

OK--my Delrin tips arrived yesterday, so I've been able to give them a pretty good workout. (Actually, a gear order from Cignot with some new attys and my first pass-through also showed up. I got so wrapped up with my new toys that I actually did not smoke at all last night, which is odd for this still-transitional user.)

I am a 90% convert to these tips. They really make the whole dripping thing a lot quicker and more effortless as the looseness of stock 510 tips has been bothersome to me. The tight O-ring connection between tip and atty is really welcome, and I like the "hourglass" shape of the thing, and so far no juice backflushes!

The 10% of me holding out is a personal phobia. The texture of the Delrin reminds me of wood (ebony, maybe). I have a phobia of the fingernails-on-chalkboards type for the feel and taste of wood in my mouth. It's so bad, to eat an ice cream bar, I have to first remove the stick. I'm only slowly convincing my brain that this is a plastic and not a wood substance. The graininess of the Delrin may be something normal people will like, as it may be providing the lips a tighter seal on the tip. But I'm think of trying to wet-sand it slicker with some ultra-fine grade paper.

But even with that said, I now wish I'd bought four of them!

 

[tmbrown327]

I'm using a delrin t-tip on my 801 atty, and it works well, except that the juice tends to pool at the bottom. If I take the first drag without puffing out first, I'll get a small amount of juice in my mouth. I thought I read somewhere that the design had been modified to eliminate that, but I don't recall.

 

[forcedfuel50]

Yes, i cant update it to the "widemouth" design, no charge. Ship to:

Super T
Box 331
Sauk Rapids, MN 56379

 

[tmbrown327]

Thanks for the offer, but I'll just buy another one at some point. I was just checking to see if my memory was correct. Too bad you make them so sturdy, probably have this one a while.

 

[kdd121s]

I converted to T-Tips when they first hit the market, as I have been a drip person from start. I was awestruck by the original stainless T-Tips when I tried them for the first time and I still use them avidly. I have ordered the new high polished aluminum wide-mouth T-Tips and look forward to the aesthetic and slight performance shift. All in all, an amazing product line that Dave has ushered into the world of vaping.

 

[forcedfuel50]

I'm glad you guys like them!