AC powered ecig
- Thread starter cremate
- Start date
- th_trl_thread_readers 0
- Status
Hi Cremate - welcome to ecf
did you get your ac powered ecig from a website? If you did can you copy and paste the web address for it so we can see what you are actually using then we can make the correct recommendations
did you get your ac powered ecig from a website? If you did can you copy and paste the web address for it so we can see what you are actually using then we can make the correct recommendations
Hi, you're looking for an "ego passthrough"
Mini eGo USB Passthrough - MyFreedomSmokes.com
With a battery you could use it disconnected or wired and I think it would have more power when wired.
Joyetech eGo-C 650mAh USB Pass-through Battery for Electronic Cigarette
Here's one with variable voltage (VV)
USB Variable Voltage Mini Passthrough - Chrome
I didn't compare any prices.
A CE5 is a lot better than the CE4. you can take it apart to clean it and it has replaceable heads.
welcome to ECF
Mini eGo USB Passthrough - MyFreedomSmokes.com
With a battery you could use it disconnected or wired and I think it would have more power when wired.
Joyetech eGo-C 650mAh USB Pass-through Battery for Electronic Cigarette
Here's one with variable voltage (VV)
USB Variable Voltage Mini Passthrough - Chrome
I didn't compare any prices.
A CE5 is a lot better than the CE4. you can take it apart to clean it and it has replaceable heads.
welcome to ECF
All three that DKP# linked are great choices. I use the Variable Volt one myself.
Hey cremate - for future reference your V2 uses 808 threading for cartomizers and all 3 of DKP#'s excellent recommendations use both ego style threading and 510 threading (which is the most popular thread for the different clearos and tanks) - please note that some juices will crack plastic tanks (most citrus, cola and cinnamon flavors) so to play it safe I would recommend the new Mini Protank 2 which can be disassembled completely for cleaning and has a glass tank so any juice can be used in it
Hope this helps
Hope this helps
OK, so you already have a passthrough...the V2 Power cig.
You'd need to find out the voltage so you know what ohms to select. Also the connector type to match it.
I saw one reference that it was 5v but I'm not sure it's verified. Also another post that said it was an 808D connector on normal V2's. IDK for sure on this but it's probably the same so they could use their stock cartos. If you can find a clearo in 808D for some reason, you could use an adapter.
EDIT: ^^^^ beat me to the connector type
You'd need to find out the voltage so you know what ohms to select. Also the connector type to match it.
I saw one reference that it was 5v but I'm not sure it's verified. Also another post that said it was an 808D connector on normal V2's. IDK for sure on this but it's probably the same so they could use their stock cartos. If you can find a clearo in 808D for some reason, you could use an adapter.
EDIT: ^^^^ beat me to the connector type
Discount Vapors has a passthru for I think $8.95...ego/510
I have two in the mail from litecigusa for $9.95 each...haven't used those yet....ego/510
I also use some passthru ego/808 type batteries from Smokeless Image.
I have two in the mail from litecigusa for $9.95 each...haven't used those yet....ego/510
I also use some passthru ego/808 type batteries from Smokeless Image.
Hey all - so would these fit on the recommendations? I don't see anything about threading (just CE5):
E-Liquid Made in USA - E-Cig CE5 tank Atomizer
Follow up question. This is a rebuildable tank. What uses need replacing first on these?
E-Liquid Made in USA - E-Cig CE5 tank Atomizer
Follow up question. This is a rebuildable tank. What uses need replacing first on these?
Adapter - 510 Battery to eGo This will let you use any ego topper but a CE4 should have 510 threading inside and be able to fit on your passthrough. It will overhang but it should work just fine.
usually the wick is the first thing that needs replacing. One simply removes the old wick, dry burn the coil to get rid of any gunk, then re-wick, saturate and test burn, everything fine the assemble, juice up and vape. After the coil is spent the wrapping a new one is necessity and re-wicking. Not familiar with the one you posted. looks more like a changeable then a re-buildable, but people have re-built many changeable atomizers. So it may be possible. Check out the many coil build threads to get an idea of what needs to be done and equipment needed. Have fun!!
the joyetech ego-c passthrough in 650mah or 1000mah is the better route. i have a few of the mini-USB passthroughs and they can get finicky when trying to fire atomizers below 2.0ohms. the joyetechs dont have this issue and you can still take them off the cable and use them on the go.
Thats an 808d thread. There are some Kanger eSmart clearomizers fro a good price at Vapor Kings and also at EV Cigarettes. I think Litecig USA has them too.
They are similar to the V2 and small Halo tanks but at a much much better price.
Yes they will. Those use both threads like the CE4, T2, iClear 16, ect. An atomizer that has only the 510 thread like the Nova or iClear 30 will work too. It's pretty standard.
The replaceable part is the head. The coils and wicks (head) get a buildup on them after a while and taste bad. Look up "dry burn" on youtube to see how to extend their life.
Here's the head:
E-Liquid Made in USA - E-Cig CE5 Coil Head
Those seem quite expensive.
here's the CE5 for $5 and a 5 pack of replacement heads for $11
CE5 eGo Clearomizer with Changeable, Replaceable Heads, Coils, and Wicks
CE5 eGo Clearomizer with Changeable, Replaceable Heads, Coils, and Wicks
Shop around and you can probably find an even better price and single heads
- Status
Similar threads
