Accidentally got sub-ohm coils!

[PeterLi]

I ordered Kanger dual coils for my Aerotank with I-Stick 30w battery, and I didn't know 1.0 resistance was sub-ohm, but that's what it says on the box.

Can I still use it with my set-up? If so, anything special I need to know? Like what watts/volts should I be setting it at?

 

[IMFire3605]

I ordered Kanger dual coils for my Aerotank with I-Stick 30w battery, and I didn't know 1.0 resistance was sub-ohm, but that's what it says on the box.

Can I still use it with my set-up? If so, anything special I need to know? Like what watts/volts should I be setting it at?

1.0ohm is not Sub-ohm, 0.99ohm and lower are Sub-ohm. The iStick30w I believe can handle down to 0.5ohms just fine, so you are good with those coils regardless, if you have the air flow you should be able to run up into the 15watt range no problem.

 

[StorableComa]

Had that same thing happen. Was picking up some coils for my protank3 and I got the .8 ohm Vocc coils. Luckily I picked up an aero tank and genitank mini I can run them in. Main issue would be making sure your battery/mod supports the ohm rating as mentioned by @IMFire3605 .

 

[suprtrkr]

Should be ok on that mod. Those coils will probably produce more vapor than you're used to.