Advice on a mech mod with low volt drop

[Smlexy]

As said in the title I need some advice on what mech mod to get next. My local shop is these guys, https://squareup.com/market/2vapedx i'm wondering out of these mods which one is recommended for the lowest volt drop. The mod will be paired with only the best batteries "sony vtc4 30a". I'm not to fussed about button placement, or any of the cosmetic stuff. The mod will be solely for super low ohm setups so it also must be a true mechanical mod.

I'll do some of my own research in the mean time and will post if I find anything first.

 

[Akolite]

As far as I know, the Nemesis is pretty much the best choice for low voltage drop.

 

[jcalis1394]

^Can vouch for that. Nemesis voltage drop is insanely low. Get the brass switch and top cap and you get a slightly even reduced voltage drop. I recall the last time I measured it I got a .25V drop on a 0.5 ohm coil.

 

[Portertown]

On a Poldiac Aname V2 I got a voltage drop of .11 volts with a Kayfun Lite coiled with a .98 ohm coil. I was using a Sony US18650VTC4 battery.
The Poldiac V2 comes with the low ohm switch kit and the contacts are Rhodium coating over silver coated brass. This testing was done with a new mod as delivered from MMV. I was so impressed with it, I ordered another one this weekend.

 

[Akolite]

I'm curious if the copper Nemesis has an even lower voltage drop. I may pick up a clone just to see.