Advise on an at work setup

[Wakefulpanda]

Hello friends,

Currently I don't vape at work, only at home. At work I've been chewing nicotine gum for more than a year and honestly I'm getting tired of it. I have tons of gear here at home, Kayfuns, sigelei 20w, 3 MVP2's, Itaste V3 and tons and tons of toppers, drippers, etc.

Last week I decided to cut the gum out and vape at work (not actually at my desk but I will walk outside or go to the bathroom. This isn't because I can't but I choose not to. I was using my Itaste V3, two bottles of juice and my dripping atomizer from Altsmoke Your Online Electronic Cigarette Store These things are amazing.

What I'm looking for is something small like the Itaste V3 but a topper that I can rebuild that is small. So basically a pen size e cigarette that I can build on and not have to drip. Is there anything like this?

Would love some recommendations, I'm ready to buy tonight.

Thanks guys

 

[Rickajho]

If you want a dripping experience but without the fuss factor you should take a look at a bottom feeding Reo. => Reos Mods A Reo Grand has a 6 ml capacity and for most people that means no need to refill anything during a work day. The low profile (LP) version will work with almost any atty designed for bottom feeding. If you have some attys you already love you can check with this guy to see if they can be modded to bottom feed. => http://www.e-cigarette-forum.com/fo...-supplier-forum/581604-catfish-atty-mods.html

A Reo Grand isn't as big as you may think. With no atty mounted it's about the dimensions of a business card. Very pocket friendly, but indestructible.

 

[Wakefulpanda]

I'm thinking of buying two of these Mini Kayfun V2.1 RBA Clone | Origin Vape

 

[Wakefulpanda]

If you want a dripping experience but without the fuss factor you should take a look at a bottom feeding Reo. => Reos Mods A Reo Grand has a 6 ml capacity and for most people that means no need to refill anything during a work day. The low profile (LP) version will work with almost any atty designed for bottom feeding. If you have some you love you can check with this guy to see if they can me modded to bottom feed. => http://www.e-cigarette-forum.com/fo...-supplier-forum/581604-catfish-atty-mods.html

A Reo Grand isn't as big as you think. With no atty mounted it's about the dimensions of a business card.

Thank you for that information I will go look at them right now.

 

[Wakefulpanda]

I ended up purchasing

2 x Mini Kayfun V2.1 RBA Clone | Origin Vape

2 x Innokin iTaste VV (V3) Express kit - 101 Vape

The reo was just a tad to expensive for my taste and I don't want the added hastle of bringing batteries to work. But now that my eye is on it I think I'm going to buy one for home use

 

[edyle]

Hello friends,

Currently I don't vape at work, only at home. At work I've been chewing nicotine gum for more than a year and honestly I'm getting tired of it. I have tons of gear here at home, Kayfuns, Sigelei 20w, 3 MVP2's, Itaste V3 and tons and tons of toppers, drippers, etc.

Last week I decided to cut the gum out and vape at work (not actually at my desk but I will walk outside or go to the bathroom. This isn't because I can't but I choose not to. I was using my Itaste V3, two bottles of juice and my dripping atomizer from Altsmoke Your Online Electronic Cigarette Store These things are amazing.

What I'm looking for is something small like the Itaste V3 but a topper that I can rebuild that is small. So basically a pen size e cigarette that I can build on and not have to drip. Is there anything like this?

Would love some recommendations, I'm ready to buy tonight.

Thanks guys

there's the miniprotanks and miniaerotanks but for a proper rebuildable, there's the 14mm kayfun mini

$14.06 Kayfun Mini V2.1 ES Style Rebuildable Atomizer Kit (1.6-4.0ml) - stainless steel at FastTech - Worldwide Free Shipping

14mm would match the size of ego batts and vv v3.

 

[edyle]

double post

 

[edyle]

well watdaya know you stumbled on the same thing!

 

[Wakefulpanda]

well watdaya know you stumbled on the same thing!

Yup! I looked at Fasttech but I can't wait that long, I need something by next week. Good looking out tho man, great vapers think alike! But that darn guy above you now has me obsessed with buying a Reo.... I can't win.

 

[edyle]

Yup! I looked at Fasttech but I can't wait that long, I need something by next week. Good looking out tho man, great vapers think alike! But that darn guy above you now has me obsessed with buying a Reo.... I can't win.

Well a Reo would be a great one to have but it ain't anything like a pen style. If you do get a Reo I bet it turns into your main vape.

 

[eratikmind]

Are you are your feet or sitting down most of the day?

If I was still working, I would be using a RDA in my office. For out and about site visits, I would use one of my RTAs.

 

[Wakefulpanda]

Are you are your feet or sitting down most of the day?

If I was still working, I would be using a RDA in my office. For out and about site visits, I would use one of my RTAs.

I sit most of the day. I work in a room with some very expensive equipment and I'd rather not mess around with vaping at my workstation. That being said, I can vape at my workstation but I choose not to.

 

[PONKAW]

I have been using this exact set up for two months now... in fact I have a black vv3 / black mini and a silver vv3 /silver mini i use in rotation. The minis are a little quirky to fill but otherwise, build it like you do your full-size kfun. It is tad longish (around 8 1/2 in) but feels balanced and I have had zero issues keeping it in my front pockets while at work. Your going to love it...

btw I keep a back up in the car... and had to use it once when I forgot to refill the mini one morning.

 

[Rickajho]

I ended up purchasing

2 x Mini Kayfun V2.1 RBA Clone | Origin Vape

2 x Innokin iTaste VV (V3) Express kit - 101 Vape

The reo was just a tad to expensive for my taste and I don't want the added hastle of bringing batteries to work. But now that my eye is on it I think I'm going to buy one for home use

Supta you, but unless you are vaping your buns off at subohm a single 18650 battery should do you for an entire work day.

The other way to look at it: Bring one extra battery with a Reo, or bring a VV V3, passthrough cable, and all your dripping supplies & extra bottles of liquids.

 

[Papa_Lazarou]

It's not like we're Jehovah's Witnesses or anything, but let me just add to the notion that a reo might be a good idea.

Like you, I had a different mental set when it came to the workplace - home was one thing, work another. At home, I wanted the best vape possible and had the time and inclination to invest in that. This landed me in Reoville after the better part of year experimenting. At work, I wanted no fuss, all day convenience, and (if I'm being honest) stealth. After 3 months of small mods and tanks at work and party time at home at night I came to the realization that the two were really one, with the reo being the rosetta stone.

My advice? Get a reo - you're ready. Sort out where and when it's your go-to and just let it happen. $10 says you won't find a situation that the reo isn't your device of choice. It will tell you that, not me, not anybody in here.

 

[Wakefulpanda]

I'm all set for work! It's working pretty well. The build deck on the mini kayfun is a little smaller and filling it is a little difficult but it's working like a champ. 1.8 Ohm @ 11w.