New AFS is something that you cant imagine friend.
No leakage, no flooding problems, no learning curve, no need to see where the laser hole is.
Ok i'm curious now...no laser hole at all? any 3.7 or HV 901 can be used?
AFS Prime
- Thread starter harpo
- Start date
- th_trl_thread_readers 0
- Status
Ok i'm curious now...no laser hole at all? any 3.7 or HV 901 can be used?
No, not any atomizer womble, only mine but they are made in a totally different way than my previous ones
No, not any atomizer womble, only mine but they are made in a totally different way than my previous ones
Say it, before some nerd will claim your invention ;-)
Last edited by a moderator:
New AFS is something that you cant imagine friend.
No leakage, no flooding problems, no learning curve, no need to see where the laser hole is.
Intersting imeo. I guess I was lucky and had a small learning curve with the help of the members here.
I never experienced leaking either! Intersting imeo. I guess I was lucky and had a small learning curve with the help of the members here.
thats good matrix
Ok, I will say it emonty!! You know already that when all people think in a way I think the opossite, yes?
So I feed the atomizer not from its upper hole as all people try to do but from down, through the atty hole. So the atty cant leak because its hole is inside the AFS feeding the resistance with liquid all the time. I made more holes (number is a secret for now). All holes are inside the AFS and they are on the same level with the original hole so all liquid can be inhaled. In every inhale only the right amount of liquid comes through the atty.
So we avoid liquid in mouth because GG is always facing down (about 60 degrees from the straight position (thats the way we all prefere to smoke), we dont have leakage problems because atty has no hole to leak, also the leakage of the center pole is going on the collect liquid tank only, we also have the ability to lock the liquid by locking the air holes that are made for the adjustable draw, we can adjust the liquid that comes to atty with the adjustable draw again by closing or opening the holes when we have fat or thin liquid, and the liquid can be vaped all of it because holes are on the base of the atty and not in the middle of it.
Finally AFS is threaded on the GG so no way to go out of the atty!
Nice Emonty??????????????
So I feed the atomizer not from its upper hole as all people try to do but from down, through the atty hole. So the atty cant leak because its hole is inside the AFS feeding the resistance with liquid all the time. I made more holes (number is a secret for now
). All holes are inside the AFS and they are on the same level with the original hole so all liquid can be inhaled. In every inhale only the right amount of liquid comes through the atty.So we avoid liquid in mouth because GG is always facing down (about 60 degrees from the straight position (thats the way we all prefere to smoke), we dont have leakage problems because atty has no hole to leak, also the leakage of the center pole is going on the collect liquid tank only, we also have the ability to lock the liquid by locking the air holes that are made for the adjustable draw, we can adjust the liquid that comes to atty with the adjustable draw again by closing or opening the holes when we have fat or thin liquid, and the liquid can be vaped all of it because holes are on the base of the atty and not in the middle of it.
Finally AFS is threaded on the GG so no way to go out of the atty!
Nice Emonty??????????????
Last edited:
Last edited by a moderator:
Well to deal with the current model's air flow increase and juice flow decrease I found the solution that is working for me right now... I went to Lowes and found an oring that fits down into the opening for the atty threads...( 1/2"od x 5/16" ID x 3/32") That covers the cartomizer holes and cuts the flow of air off to the center pole and I am getting only air from the original atty hole now. Back to normal again. I was having trouble getting the same juice flow as my prototype that did NOT have cartomizer holes. When I got the TS I was having trouble getting the juice to flow. So I hope this quick fix helps people out there with their AFS and TS. At least until Imeo gets the AFS V2 in production.
Instead of blocking the original hole you block the center pole Vapn. Good!!! its a second option that can work well too like the first one.
hey vapen I'm working on some ideas and one of them is I put the o-rings round the air holes on the caps threads but Im still getting air to the 901 attie. So I added one tiny silicone piece i got from a center post on an kr808 USB charger and put that around the center post to seal it. That combination has been working really good so far.
Imeo that new AFS sounds awesome... I cant wait to get it...tell us more about this new attie.....
Imeo that new AFS sounds awesome... I cant wait to get it...tell us more about this new attie.....
My 6v i atties arrived today - just put them in my AFS - worked first time, no issues yet, so fingers crossed.
hey vapen I'm working on some ideas and one of them is I put the o-rings round the air holes on the caps threads but Im still getting air to the 901 attie. So I added one tiny silicone piece i got from a center post on an kr808 USB charger and put that around the center post to seal it. That combination has been working really good so far.
Imeo that new AFS sounds awesome... I cant wait to get it...tell us more about this new attie.....
This new atomizer is made a little different that normal ones Grimmer. It has holes around its base and inside has a small gap between resistance and threads that works like a small tank with liquid that waits for the liquid to be inhaled. It works like a dream. I wish it would be ready for all of you to try it but not yet. I ensure you that new AFS is beyong anything Grimmer
Excellent! I am having success with the new iAtties too. Loving the i6 at 6v at the moment.
Interesting I'm starting to like this attie already .... sounds like a whole new approach.
.... sounds like a whole new approach.
I love the 3.7v cr123 batteries.... I get a great vape from it. I mostly vape with menthol (Robs menthol and Black Tea Im loving the most right now) so the cool like vaper works the best for me.
Hey Vapen if you haven't tried Rob's Black Tea Ejuice you need to. It's really good. Last friday when I got my GGTS I also ordered his Black Tea. I never had that flavor and man it tastes so good that I ordered that night for more. He's now going to be my main goto guy for eliquids and ecig stuff.
But when ever the GGTS passthrough comes in again I may get that just to try 5v on the GGTS. But I think I made a mistake on my last order when I ordered some batteries. I think by accident I got 3v cr123 batteries instead of 3.7v but the problem is I have no charger for it.
Unless I can charge them on a 3.7v double multi battery charger.
Hey Vapen if you haven't tried Rob's Black Tea Ejuice you need to. It's really good. Last friday when I got my GGTS I also ordered his Black Tea. I never had that flavor and man it tastes so good that I ordered that night for more. He's now going to be my main goto guy for eliquids and ecig stuff.
But when ever the GGTS passthrough comes in again I may get that just to try 5v on the GGTS. But I think I made a mistake on my last order when I ordered some batteries. I think by accident I got 3v cr123 batteries instead of 3.7v but the problem is I have no charger for it.
Unless I can charge them on a 3.7v double multi battery charger.
Last edited:
I love the 3.7v cr123 batteries.... I get a great vape from it. I mostly vape with menthol (Robs menthol and Black Tea Im loving the most right now) so the cool like vaper works the best for me.
Hey Vapen if you haven't tried Rob's Black Tea Ejuice you need to. It's really good. Last friday when I got my GGTS I also ordered his Black Tea. I never had that flavor and man it tastes so good that I ordered that night for more. He's now going to be my main goto guy for eliquids and ecig stuff.
But when ever the GGTS passthrough comes in again I may get that just to try 5v on the GGTS. But I think I made a mistake on my last order when I ordered some batteries. I think by accident I got 3v cr123 batteries instead of 3.7v but the problem is I have no charger for it.
Do NOT use the 3.7v charger on the 3v batteries. It "may" be ok, but the 3.7v charger charges at around 4.2v, the 3v charger at 3.6v. I wouldn't do it.
got ya.... how safe are the cr123 3v to make 6v.... I haven't tried 6v because of the hazards i've been hearing with cr2's at 6v but I haven't heard any issues with cr123's at 6v....
got ya.... how safe are the cr123 3v to make 6v.... I haven't tried 6v because of the hazards i've been hearing with cr2's at 6v but I haven't heard any issues with cr123's at 6v....
save, as long as you treat them well:
1.) keep them in series
2.) check voltage regularly
4.) charged: remove from charger
5.) quick voltage drop: toss that one
6.) damaged: toss them
- Status
