Aga-t2 problems

[spc_erp]

Hey all, been awhile since i posted on here. I got two aga-t2 and am wrappin around 2 ohms every time. im usimg 32 gage kenthal akd hatimg it. Ive got wait two tanks for the flavor to taste right just seems to me that im wasting juice, i wanna use it on my kicked silver bullet but wen i do i get little vapor and its makin me mad!!!! Any help????? Edit: i wanna wrap atound 0.8- 1 ohm but im not sure what size mesh i have.

 

[MCMLXX]

I got mine working at 1.6 ohm using 32 gauge 3/4 wrap and favor was good from first tank. I use petarK and unoxidize wick. All standard wick hole and air hole size.

 

[Clearo-Mizer]

I got mine cooking with a 5/4 wrap of 32 for 1. 8 on a #400 straw...pretty tight wick but its working well ...

 

[scooterholic]

I learned from theses two guys http://www.e-cigarette-forum.com/forum/rebuildable-atomizer-systems/398282-victory-over-aga-t.html , http://www.e-cigarette-forum.com/fo...ly-opportunities-hone-your-skills-part-1.html , http://www.e-cigarette-forum.com/fo...ly-opportunities-hone-your-skills-part-2.html. And then there's this it's a long read but very worth it http://www.e-cigarette-forum.com/fo...nyone-tried-aga-tiamat-plus-w-glass-tank.html. You can always set it up with silica and give the ss a break, I am still learning and when the ss frustrates me to much that's what I do.

 

[Hiding]

If you want to wrap a lower ohm coil, you need to use a lower awg wire. try 28awg kanthal.

For the taste issue, Are you rolling a new wick every time?
From my (all be it, limited) experience. New wicks have a bit of a break in period, but you can recoil an old wick.
My coils have been lasting 2-3 weeks (maybe longer but I recoil when I want to change flavors), and I've been using the same wick for 4 coils now. New coil on and old wick and no taste issues.

 

[wertyxhts]

Yes, best thing is to use 28g kanthal. If you want to use 32g, might require less wraps.

 

[FogHawg]

I started w/30AWG kanthal w/my AGA T2s & have seen no reason to change so far. I target around 1.5 ohms since I don't have a PV for SLR & a 4/5 wrap coil usually hits close to my target. Works for me.

 

[vapdivrr]

you are getting little vapor with the kick because the kick is held to only 10 watts. with 32g and a 2 ohm coil you would need to be at around 5 volts for some good vapor, this would equal almost 13 watts. so kick the kick and up the volts a little, this should give you more vapor. as for the flavor, this can be alot of things, most likely an unstable coil. if you cannot resolve with 32g try 30g instead and lower the resistance and volts.