All About Mech Discussion[LOCAL]

[MMQWDA]

Beautiful Mechs here!

Currently looking for a Glas Mech though They used to be really really expensive but not anymore (Not really)!

Glas Mech is nice but haven't really see one now. Hahah More clone is made so i believe it actually pushes the price of authentic down too. When you got your Glas must share share here. Your petri already got me crazy hahah

 

[MMQWDA]

MM: Kamry Robot 1
D/T: Snubnose
BATT: 2 x AW 18350 (stacked)
PETROL: 60pg (flavour is the priority)
Resistance: 1ohm

From my personal experience... more wattage = more flavour. I'm outputting 70watts, assuming it's at max voltage @ 8.4v.
More PG will also enhance flavour, whereas VG will enhance vapour production as I was told.
I don't find any hard in using a tank on a mech, just make sure your tank can handle it. I personally make it a habit to only use tanks/drippers with protruding positive 510 pins.
Just make sure you don't go over your batteries limit. A good rule of thumb is to always build a tad bit lower than your battery's limit

HB6 is the only battery so far that is true to its 30amp rating.. I'd go or HB6 over VTCs anyday. If battery life's an issue, just buy more HB6s hahaha.

Kamry Robot 1! Terminator style. One firece looking technology you have there

The thing about 510 pins is that my GB M is a little short. Has to do a slight twist (real slight) for the connection. Possible to change the 510 pins? To be frank i am a little worried for the slight twist might cause bigger issue. If it gonna be i rather change it. Safe comes first.

Yeah more HB6 with mutlipie cell sharger will do. Not really expensive for batt actually. It's around $10 right? Saw it at some shop.

 

[HiShAm]

Actually still alright. Hahaha how cherry bomber? Good horsepower?

Bought on impulse, i hate it...especially the firing button, no feel as its a metal round button u need to press on, a friend say u need to get the magnet which i seriously cant be bothered to search.

The button gets hot easily and I worry it blow up..now its stored in my museum since i dont think i will use it..

 

[Karstine]

cherry bomber have major safety issue. As of now I have no idea if it's fixed in the next iteration of cherry bomber. Just apply due care when using it. Never put cherry bomber in a bag full of your keys, coin or any metal.

 

[HiShAm]

Ya i read about it..i've dismantled, took out the batteries, place the mod in the box..since its mech mod, i dont have to worry electrical parts spoil.

 

[MMQWDA]

Bought on impulse, i hate it...especially the firing button, no feel as its a metal round button u need to press on, a friend say u need to get the magnet which i seriously cant be bothered to search.

The button gets hot easily and I worry it blow up..now its stored in my museum since i dont think i will use it..

Ohmygawd. Hopefully you can get it solve and run it soon. if not get a Hexohmv is not back. Thinking of getting one. Hahah but definitely with rda. OMG look at the video bro karstine shared. Fires when it has contact with metal.... That's dangerous bro.

 

[MMQWDA]

cherry bomber have major safety issue. As of now I have no idea if it's fixed in the next iteration of cherry bomber. Just apply due care when using it. Never put cherry bomber in a bag full of your keys, coin or any metal.

Dangerous pipebomb to be carry around. Real dangerous... If any has it please note that it will need a silicone or pouch to keep it safe if have one. Don't wanna see any incident that will cause further implementation on bans due to the hazards.

 

[Karstine]

general home usage should be okay. But I have no idea if cherry bomber are made with other material or not (like wood). But I would advise against carrying cherry bomber out. @MMQWDA idea of putting it in a pouch might work only IF you cover the whole mod+atty (meaning the whole unit must not be exposed)

If metal connected will cause it to fire, I have some suspicion that when the unit is wet, it might fire...

 

[TheKiwi]

WAH piang eh this kinda mod. I would just lock it up in the depths of my house and only resort to using it as a very very last resort


Sent from my iPhone using Tapatalk

 

[Karstine]

WAH piang eh this kinda mod. I would just lock it up in the depths of my house and only resort to using it as a very very last resort


Sent from my iPhone using Tapatalk

includes cherry bomber clones, cherry bomber derivatives. I don't know if they failed to isolate the box from the atty man.

 

[MMQWDA]

general home usage should be okay. But I have no idea if cherry bomber are made with other material or not (like wood). But I would advise against carrying cherry bomber out. @MMQWDA idea of putting it in a pouch might work only IF you cover the whole mod+atty (meaning the whole unit must not be exposed)

If metal connected will cause it to fire, I have some suspicion that when the unit is wet, it might fire...

Yeah true about carrying it out. It's a true pipebomb. Yes I meant fully cover. Because the video shows the screw only has contact with the rda and it actually fires. So definitely something to cover whole. No wonder alot selling away theirs on media.

 

[MMQWDA]

WAH piang eh this kinda mod. I would just lock it up in the depths of my house and only resort to using it as a very very last resort


Sent from my iPhone using Tapatalk

hahah when the world has Reo Grand indestructible mod, they will need a CherryBomb in-danger mod.

 

[laminated_tissure_paper]

Kamry Robot 1! Terminator style. One firece looking technology you have there

The thing about 510 pins is that my GB M is a little short. Has to do a slight twist (real slight) for the connection. Possible to change the 510 pins? To be frank i am a little worried for the slight twist might cause bigger issue. If it gonna be i rather change it. Safe comes first.

Yeah more HB6 with mutlipie cell sharger will do. Not really expensive for batt actually. It's around $10 right? Saw it at some shop.

Haha I hate how it looks xD. I'm on the hunt for a copper SMPL but now not enough funds

Anyway I'm pretty sure you can find a replacement positive 510 pin. I mean, it literally is just a screw hahaha. I'm only worried if anyone adjusts the pin too far down, it'll be loose and shaky and have a wonky connection... worst case scenario... a short. Safe than sorry brudduh! Can always get a clone with a nice protruding pin hehe.

And yes! HB6s go for $10 each... at some shop. Those batteries give me confidence LUL!

 

[MMQWDA]

Haha I hate how it looks xD. I'm on the hunt for a copper SMPL but now not enough funds

Anyway I'm pretty sure you can find a replacement positive 510 pin. I mean, it literally is just a screw hahaha. I'm only worried if anyone adjusts the pin too far down, it'll be loose and shaky and have a wonky connection... worst case scenario... a short. Safe than sorry brudduh! Can always get a clone with a nice protruding pin hehe.

And yes! HB6s go for $10 each... at some shop. Those batteries give me confidence LUL!

Copper SMPL? Hmmm don't have the attracted feel for SMPL cause very simplified. Wanna have abit of competition mec feel hahah

Yeah got myself a clone VeloC back. Hahah hmmm yes bro. Rather be safe than sorry Agree with that.

Yeah just that the shop now is closed. Holiday Waiting for them to be back.

 

[laminated_tissure_paper]

Copper SMPL? Hmmm don't have the attracted feel for SMPL cause very simplified. Wanna have abit of competition mec feel hahah

Yeah got myself a clone VeloC back. Hahah hmmm yes bro. Rather be safe than sorry Agree with that.

Yeah just that the shop now is closed. Holiday Waiting for them to be back.

As a designer by trait, simplicity and class just make my balls have sexy spidey senses HAHA. And nice dripper you got there.

New entry!:
MM: Noisy Cricket
D/T: Snubnose
BATT: 2 x LG HE4 in series
PETROL: Gourmet Connoisseur
OHM: 1

 

[MMQWDA]

As a designer by trait, simplicity and class just make my balls have sexy spidey senses HAHA. And nice dripper you got there.

New entry!:
MM: Noisy Cricket
D/T: Snubnose
BATT: 2 x LG HE4 in series
PETROL: Gourmet Connoisseur
OHM: 1

WO WO WO!
Clean metal set up you have there. New entry? Recent collection?
Seems so metallic build. Snubnose is naiseeeeee
Thanks bro it's actually a tank but you can drip still through.

 

[seraphe]

MM: Prax2S clone
D: Derringer clone
BATT: Sony VTC-5
PETROL: various
OHM: 0.3

(Repost)

This is a so-called 1:1 clone. It supposedly has the same finish as the real one but I can't be sure yet. I'd probably do a side-by-side when the genuine piece arrives.

Due to the hybrid connector, the length is nicely reduced, giving it a sleek and discreet look. It's also easier to switch atty, as long as the atty doesn't have the flushed 510 tip.

The locking system is one of a kind. You'd need to push the button to the side before you can press it up. For a smooth button in a clone, it takes some luck though.

 

[laminated_tissure_paper]

MM: Prax2S clone

D: Derringer clone

BATT: Sony VTC-5

PETROL: various

OHM: 0.3

(Repost)

This is a so-called 1:1 clone. It supposedly has the same finish as the real one but I can't be sure yet. I'd probably do a side-by-side when the genuine piece arrives.

Due to the hybrid connector, the length is nicely reduced, giving it a sleek and discreet look. It's also easier to switch atty, as long as the atty doesn't have the flushed 510 tip.

The locking system is one of a kind. You'd need to push the button to the side before you can press it up. For a smooth button in a clone, it takes some luck though.

Whoaaaaa

 

[laminated_tissure_paper]

WO WO WO!
Clean metal set up you have there. New entry? Recent collection?
Seems so metallic build. Snubnose is naiseeeeee
Thanks bro it's actually a tank but you can drip still through.

New entry, as of 17 Dec hehehe

 

[MMQWDA]

New entry, as of 17 Dec hehehe

Chio max. Guess my poison getting deeper and DEEPER! DAMNNNNNNNN