good luck lol I have been reading these for months now, and I still cant make one
- Status
heh Im just waiting to be able to buy some mesh so I can give it a go. I've been out of work for a little bit and my wife not too happy I want to spend more money on materials even if it means not having to buy more chinese stuff later on...
raidy your stuff is so inspiring that now I want to build a pipe too lol
raidy your stuff is so inspiring that now I want to build a pipe too lol
Kanthal is cheap and while the mesh is a rather sizable cost, gives you a large supply of wicks that will last a long time, easily several years worth. Investing in tools might be an issue, but doesn't have to be.
Raidy please give us an update on the status of the new atty!!!!
Do you also plan to design for mass production complete mods???
Perhaps with VV, vapor production control, combined with mp3/mp4 player, cell phone, HD digital camera, gps, nail clipper, hair trimmer etc
Do you also plan to design for mass production complete mods???
Perhaps with VV, vapor production control, combined with mp3/mp4 player, cell phone, HD digital camera, gps, nail clipper, hair trimmer etc
yea I have all the tools i need so far i think (note i didnt say I have what i want lol) and I got lucky and and kinda 'fell' into the scubagen coop and I have few scraps of nicrome... just need some mesh lol
I am looking at some kanthal on ebay do I want the 32 awg it like 75 feet wow or there's some I cant read but says 0,16 mm but its only 10 meters for like the same price or is the 32ga / .16 mm what i should go with?
And is there a big difference in the 400 or 500 mesh? I think I would want less th so I for sure am staying clear of the 325
Too many choices and no $$ lol and i am only on page 25 out of like 105 of the attys thread sooo much to read.....
I am looking at some kanthal on ebay do I want the 32 awg it like 75 feet wow or there's some I cant read but says 0,16 mm but its only 10 meters for like the same price or is the 32ga / .16 mm what i should go with?
And is there a big difference in the 400 or 500 mesh? I think I would want less th so I for sure am staying clear of the 325
Too many choices and no $$ lol and i am only on page 25 out of like 105 of the attys thread sooo much to read.....
ty ty and thanks to pkzap27 helped straighten me out too... stoopid english metric converting....
0.20mm = 0.008 INCH thats where confusion came from silly little numbers...
Sorry to sidetrack your thread Raidy. Do you have any more pipes you can show us?
And I too would like to hear more about new atty and the long awaited 'how to make raidys mods' thread (unless i am so far behind I missed that too lol)
0.20mm = 0.008 INCH thats where confusion came from silly little numbers...
Sorry to sidetrack your thread Raidy. Do you have any more pipes you can show us?
And I too would like to hear more about new atty and the long awaited 'how to make raidys mods' thread (unless i am so far behind I missed that too lol)
Hi @raidy, and first of all thank you for the inspiration you constantly give to me and to all the pv modders!
On the italian forum Sigaretta Elettronica - Forum we are talking about setting up a collective project for a pv, and someone has told that one atom-tank design I proposed, here, is the same of your patent-protected genisis, so we can't eventually make and sell it without your permission. I've clearly stated that the device is inspired by your work, but I really don't know if it violates your patent or not. So I will be very grateful if you could clarify the question.
Thank you so much again for your work and patience.
On the italian forum Sigaretta Elettronica - Forum we are talking about setting up a collective project for a pv, and someone has told that one atom-tank design I proposed, here, is the same of your patent-protected genisis, so we can't eventually make and sell it without your permission. I've clearly stated that the device is inspired by your work, but I really don't know if it violates your patent or not. So I will be very grateful if you could clarify the question.
Thank you so much again for your work and patience.
Making a genisis (like) atty by not earning money and not for business ist o.k. (only for the direct cost of parts)
Making it as an forum-group-project by not earning money is o.k.
In germany they made now the 3thrd series of genisisLV in a forum group project.
I'm happy to see that rollout of atty and i hope more and more peoples in the country forums start projects like this. What i not want: To make all the development, which cost me a lot of money, and other peoples making a lot of money with my ideas.
Can you set this link into the italian forum: http://www.youtube.com/watch?v=uFJrNgsaU5s
There is a big collection of genisis attys.
Thanks raidy
Last edited:
You are not alone! Lot of peoples want see the new atty. I wrote some posts before this, why its not possible at the moment.
Thank you for the answer. I know you are usually very busy, but we italian forum members would be very honored if you'd like to take part in our forum sometimes, because the ones of us who knows your work really really admires you. Anyway, thank you again for the inspiration you represent to all vapers, and happy modding!!!
My german is good, my english is bad, my italian is 0,001%.
I've read all these messages, but did not find an answer to an alternative to Stewalin. I also didn't see anyone inquiring about using labstone (laboratory stone like the dental labs use) - but it appears that might be a superb alternative.
I couldn't find any data on labstone safety if it's heated, though, so don't know if there might be a toxcity problem with this material - because of the heat.
Has labstone been tested? If not, how would one go about getting one of the chemists or lab technicians to test it?
I couldn't find any data on labstone safety if it's heated, though, so don't know if there might be a toxcity problem with this material - because of the heat.
Has labstone been tested? If not, how would one go about getting one of the chemists or lab technicians to test it?
Somewhere in this thread they did discuss at length alternatives to stewalin.
I can't remember where at or the outcome. Maybe search the thread for 'stewalin' and you'll find it.
There were several alternatives proposed, but I don't think there was ever a determination of what would be a workable equivalent. That's why I asked about labstone.
I don't have access to a machinist or a lathe, but am pretty sure I could get some labstone. I just don't want to get something that wouldn't work.
I don't have access to a machinist or a lathe, but am pretty sure I could get some labstone. I just don't want to get something that wouldn't work.
Master Raidy I posted thanks in some homemade attys and genesis but I will say again you are a genius...and a scholar...
and I will happily pardon your English if you will pardon my lack of good German anymore and my odd lack of social skills(I have aspergers)...Last I spoke German was in 1st year high school (didn't sound right either)..before coming to Dallas...
anyway Fajitas and Corona or preferred if/when you come to Dallas...Bet you could make a tour of the country and never want for food or drink now...or good company...
I have one of Scubabatdans DSU mods similar to the GenesisLV...Remarkable device....I am in awe of your talent...I have just gone back to doing what I love which is modding anything that I can lay my hands on which now is geared towards PV use...I still stare in wonder at how quickly you came up with so many beautiful Pipes and mods...when I feel I need inspiration I come back and look at your thread...
and I will happily pardon your English if you will pardon my lack of good German anymore and my odd lack of social skills(I have aspergers)...Last I spoke German was in 1st year high school (didn't sound right either)..before coming to Dallas...
anyway Fajitas and Corona or preferred if/when you come to Dallas...Bet you could make a tour of the country and never want for food or drink now...or good company...
I have one of Scubabatdans DSU mods similar to the GenesisLV...Remarkable device....I am in awe of your talent...I have just gone back to doing what I love which is modding anything that I can lay my hands on which now is geared towards PV use...I still stare in wonder at how quickly you came up with so many beautiful Pipes and mods...when I feel I need inspiration I come back and look at your thread...
Last edited:
- Status
Similar threads
- Locked
