Ammit 25 RTA

[fifamymaingame]

I meant the battlestar rta i use a gold alien

 

[Heartsdelight]

I meant the battlestar rta i use a gold alien

Oh, sorry misunderstood. The Alien is fine too. I don't have the Battlestar rta.

 

[Gallant]

Mine is delivered today did not have a chance to build it yet

 

[Heartsdelight]

Mine is delivered today did not have a chance to build it yet

It's good! I knew that you have to cut the leads really flush, but it needs to be flusher than flush lol or else the chimney won't screw in.

 

[Gallant]

It's good! I knew that you have to cut the leads really flush, but it needs to be flusher than flush lol or else the chimney won't screw in.

Same as the kylin if not flush the chimney will screw but wont turn to open or close JFC

 

[vexx]

It's good! I knew that you have to cut the leads really flush, but it needs to be flusher than flush lol or else the chimney won't screw in.

Any issues with the base any leaking with this?

 

[Heartsdelight]

Any issues with the base any leaking with this?

Not yet, but it's too soon to tell only been using since 11:30am this morning.

 

[Gallant]

Wicked & ready for test drive

 

[hiclass]

Wicked & ready for test drive

Hi,
What size of coil is that?
Can you attach a 4mm coil to this tank?

 

[Heartsdelight]

Juice consumption is great on this! With my Tiger coil & .49 ohms in the 5ml tank it sips juice nice & slow . Flavors great too!

 

[TrashCat]

Mine is working ok but I'm not getting great flavor. Mediocre but not great. I'll have to play around with different coils and placement.

In some RTA's (Merlin) the flavor is greatly affected by the wicking as well... I had way to much wick at first (and too big of a coil ID) and the flavor was muted.. When I switched to a 3 -3.5 ID and less wick, the flavor was amazing.

 

[TrashCat]

So to all you already using this... Is there more room between the glass and the juice inlets on this version?

That's the only reason I never bought the first one.

 

[hittman]

I almost always run 3mm coils and that's what I'm using in this one. I haven't had any problems with bubbles getting stuck or dry hits on this one like I did with the original ammit.

 

[janne303]

Mine is leaking...

Skickat från min SM-G935F via Tapatalk

 

[Heartsdelight]

So to all you already using this... Is there more room between the glass and the juice inlets on this version?

That's the only reason I never bought the first one.

Plenty

 

[Heartsdelight]

Mine is leaking...

Skickat från min SM-G935F via Tapatalk

Is it leaking from the airflow?

 

[janne303]

Is it leaking from the airflow?

Yes and and between over the airflow Ive tried many different builds and its leaking...

Skickat från min SM-G935F via Tapatalk

 

[Heartsdelight]

Yes and and between over the airflow Ive tried many different builds and its leaking...

Skickat från min SM-G935F via Tapatalk

From the video it's not that much but is it more in real life?
Is your wick covering the entire top of the wick hole? After you tuck in make sure the cotton/rayon is fulling covering the opening of the wick hole & is touching the bottom of the wick hole. Like make sure you Fan out the wick ends before tucking. How long have you had the Ammit 25 & did it start from the beginning or only after you've been using it for a while?

 

[Gallant]

Hi,
What size of coil is that?
Can you attach a 4mm coil to this tank?

SS316L 28*4 +30 3.5mm ID
No 4mm ID Clapton wont fit a simple wire may fit

 

[hiclass]

SS316L 28*4 +30 3.5mm ID
No 4mm ID Clapton wont fit a simple wire may fit

Not enough room for 4mm coil is bad. Look at the wide juice well, isn't it require quite an amount of cotton to sit in there? If we can only use smaller coil, leaking is almost inevitable.