and another vision died!!!

Status
Not open for further replies.

robl45

Super Member
ECF Veteran
Verified Member
Jan 2, 2010
965
95
florida
Why don't you just use CE2's then?

because the new fluxos have lots of issues, if I could find the old metal ones, I might consider doing that, they were hard to clean but they lasted long enough that I could just throw the things out. i didn't have juicy hits out of them which everyone seems to be saying is from condensation and whatnot.
 

robl45

Super Member
ECF Veteran
Verified Member
Jan 2, 2010
965
95
florida
this is exactly the reason why i'm going back to my hypermint juice. it isn't my favorite flavor, but I can stand it and it doesn't gunk up the stuff in two days like cinnamon and this cherry limeade i'm using.

Glad to see I'm not the only one who fries her Visions on a regular basis. I adore AVE Gorilla Juice, but that stuff is brutal and I mean BRUTAL on these Visions. Pretty much any 100% VG juice does a number on them, but the darker juices particularly gunk them up. I've had modest success with running boiling hot water through them via syringe power wash, then soak, then let them dry, then dry burn. Still, I'm about to give up vaping 100% VG (and my beloved AVE juices) through them. The only 100% VG juice that hasn't nuked them was some of the clear flavors with a thinner VG base.

I'm finding that I have to be super careful with the dry burn cycle on these Visions, but when I am careful I can get about a month out of them. They're still the best thing I've vaped on to to date, but I'm sad that they get gunked up so quickly. I can't tolerate a lot of PG in my juice (slight allergy to it) so this is just something I'm going to have to figure out.

The Fluxos are pretty much the same way, although the Fluxies are cheaper per pack, so it's easier to justify frying a Fluxie than a Visions.

Is this just one of those vapers dilemnas that we all go through? *sigh*
 

Rule62

Vaping Master
ECF Veteran
Verified Member
Oct 28, 2011
5,765
15,339
Melbourne, Florida
I'm not a Chemist either, but I'm not Familiar with too many things that can "dissolve" Any Element.

Vinegar doesn't need to Completely Dissolve a Compound. If it acts more as a Surfactant and Reduces the Surface Bonds between the "gunk" and the Wick/Coil that is Good Enough for me.

;)

I'll have to try vinegar. Lots cheaper than Everclear, which I currently use. Although I have pretty good success with it.
 

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
Apr 16, 2010
41,697
1
84,954
So-Cal
I'll have to try vinegar. Lots cheaper than Everclear, which I currently use. Although I have pretty good success with it.

The Only downside that I see is 2oz of Vinegar in 10oz of Dr. Pepper Doesn't taste Nearly as Everclear does.

And even if your Carto is Dry Hitting, or Leaking for that matter, after 3 or 4 EverClear and D.P.'s you Don't even Notice it.

Or even Care if you Do.
 

Briar

Ultra Member
ECF Veteran
Jul 28, 2009
2,350
2,558
64
A fool on the hill in Deposit, NY
This is a Very Good Point.

And since I Refuse to give up My Sickly Sweet DIY mixes, it made me find a way to keep the "Gunk" ball down to a Minimum.
That’s where the Detek Brush wipe comes in for me at Refill.

When you brush them, do you rinse them out? I'd like to try that, but I was thinking that if the brush gets the gunk off and the coil and cup are not rinsed out afterwards, it'd just go into the juice...
 

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
Apr 16, 2010
41,697
1
84,954
So-Cal
When you brush them, do you rinse them out? ...

Nope. I just push the Dentak Brush besides the Wick/Coil and the cup and give it a Twist or Two on both sides at every refill.

I like to drag the brush on a Paper Towel to clean it after each Brushing. Sometimes I will dip the Brush in Vodka before Brushing.

Sometimes I don't if I'm feeling Lazy.
 

burns_erin

Vaping Master
ECF Veteran
Verified Member
Mar 22, 2010
3,994
13,133
43
The ArmPit of Texas
Cheap Vodka works great for me... Of course I'm Russian, and Vodka has many applications, inside and out. ;)

I use vodka too since with a severe allergy to corn everclear can kill me. Not russian here, but when I used to drink, it was definitely my drink of choice.
 

Rule62

Vaping Master
ECF Veteran
Verified Member
Oct 28, 2011
5,765
15,339
Melbourne, Florida
Nope. I just push the Dentak Brush besides the Wick/Coil and the cup and give it a Twist or Two on both sides at every refill.

I like to drag the brush on a Paper Towel to clean it after each Brushing. Sometimes I will dip the Brush in Vodka before Brushing.

Sometimes I don't if I'm feeling Lazy.

I'm too lazy to pull the cup seal out every filling. I just use the brush when I'm soaking the carto in Everclear.
 

robl45

Super Member
ECF Veteran
Verified Member
Jan 2, 2010
965
95
florida
two more in the past week have died, just vaping away and then dead. granted the one last night was due for a cleaning. I have one new vision to test with the new menthol/mint juice which doesn't destroy the coils so we will see if it lasts any longer, if it dies pretty much as quick, then I have to assume that visions suck.
 

robl45

Super Member
ECF Veteran
Verified Member
Jan 2, 2010
965
95
florida
i did change juice, will open up the new vision carto this weekend and try it out, i figure that may be a lot of the problem as the other juice was very sweet, but still i've thrown out fluxes because they didn't produce vape anymore without sucking for 20 seconds, but i've never had one that just up and died while in the middle of vaping.
 

frequentj

Super Member
ECF Veteran
Verified Member
Dec 24, 2010
512
174
Louisville, KY
I probably have 7-8 visions extremes I've bought since October and I only have had one that died on me. The others are still going (some more than others, obviously, but I get at least 3 weeks of excellent vapor out of them). They do burn through the juice faster (that's why they taste so good) so I do have to dry burn them more often, but the only time I ever rinse mine out is if I've used a cinnamon or strong menthol juice. In all other cases, I've found it's enough to vape it as dry as I can and fill with new juice. I don't even empty it to do my dry burn and these things just keep working great. Try not to overthink it?
 

Briar

Ultra Member
ECF Veteran
Jul 28, 2009
2,350
2,558
64
A fool on the hill in Deposit, NY
I'm putting my money on the "House Built on Indian Burial Grounds" scenario. That or he is 6 years into 7 years of Bad Luck for Breaking a Mirror.

Seems like no matter what Rob tries, he is Cursed.


Yeah... Rob, in all seriousness, I feel bad for you. It's gotta be frustrating as hell.
 

robl45

Super Member
ECF Veteran
Verified Member
Jan 2, 2010
965
95
florida
Yeah... Rob, in all seriousness, I feel bad for you. It's gotta be frustrating as hell.

hopefully the new clean juice will do the trick, filled the last vision regular up like 4 times tonight, hopefully it will at least make it through the week.

they are pretty cool when they are working, but the regulars lose the tops, so makes it hard to travel with them, i keep forgetting to go to home depot and get that rubber thing to keep the tops on, lost a top again today in my pocket, lucky the thing was just about empty.
 

Briar

Ultra Member
ECF Veteran
Jul 28, 2009
2,350
2,558
64
A fool on the hill in Deposit, NY
Rob, have you tried the SmokTech Dual Coil Tanks?

I mean, come on, man. The top coils just aren't for you. Isn't it obvious? Why do you keep beating on them when they just don't work out for you? Give it up. :facepalm:

Turtle, Turtle... Tsk, tsk, tsk... We are supposed to be positive, and encourage people! You know:

"One equal temper of heroic hearts,
Made weak by time and fate, but strong in will
To strive, to seek, to find, and not to yield"​

BTW, what happened to your right hand?.. :blink:
 

harmonic

Vaping Master
ECF Veteran
Verified Member
Mar 20, 2011
5,157
11,413
50
Desoto, Mo
say i had a top come off too - IN MY POCKET.
guess where it was not designed to be carried - A POCKET.
FIX: don't carry in pocket. DUH.
even though you really want to. try your shirt pocket instead or get a lanyard (tie a string to an oring slip around mod)
i also found i had a cracked tube on that vision regular but it was the old original tube and had a sticker on it so i couldn't see it.
 
Status
Not open for further replies.

Users who are viewing this thread