Any good suggestions for cloud chasing?
- Thread starter Johan1
- Start date
- th_trl_thread_readers 0
- Status
I'm running a dual parallel coil. Using 28 ga kanthal wrapped around a small screwdriver. 4 wraps and I'm at .24.
http://m.youtube.com/watch?v=ikWxZWUKpjE
I usually just run a single parallel coil wrapped around a 2mm screwdriver 5 time giving me around .54.
This is on the Patriot.
http://m.youtube.com/watch?v=ikWxZWUKpjE
I usually just run a single parallel coil wrapped around a 2mm screwdriver 5 time giving me around .54.
This is on the Patriot.
I'm using dual twisted 28 ga kanthal running at .32 ohms in my trident v1. I'm also using a 30amp sony 18650. The vapor production is killer! The flavor is awesome as well.
airflow is key for clouds.
airflow is key for clouds.
airflow=key.
key=clouds.
now that is out of the way lol, my cloud RDA is set up at .27 ohm's. dual coils built with 26 ga kanthal with cotton wicking inside an omega RDA with dual 3mm airholes. can make massive clouds with ease. but be warned, i also run the sony vtc4, once you hit those low ohm ranges it will murder battery life. thats part of the trade off. battery life becomes measured in minutes basically and expect your atty to become very warm and possibly your mod as well from the heat transfer. you will also blow through juice extremely quick. i get about 2 or 3 good hits from about 12 drops of juice then its bone dry. the igo is a great little dripper, but i think the airflow might be a limiting factor for you there. as far as building coils, if you have an android phone, get on the play store and download an app called vapors toolbox. it will serve you very well.
airflow is key for clouds.
airflow=key.
key=clouds.
now that is out of the way lol, my cloud RDA is set up at .27 ohm's. dual coils built with 26 ga kanthal with cotton wicking inside an omega RDA with dual 3mm airholes. can make massive clouds with ease. but be warned, i also run the sony vtc4, once you hit those low ohm ranges it will murder battery life. thats part of the trade off. battery life becomes measured in minutes basically and expect your atty to become very warm and possibly your mod as well from the heat transfer. you will also blow through juice extremely quick. i get about 2 or 3 good hits from about 12 drops of juice then its bone dry. the igo is a great little dripper, but i think the airflow might be a limiting factor for you there. as far as building coils, if you have an android phone, get on the play store and download an app called vapors toolbox. it will serve you very well.
Truth. Lets not forget power (which sounds like a given) and higher VG (if not pure) juice certainly helps a lot.
Yea I took my igo to the vape shop and asked if they could drill it out for me and they did but it's still just one airhole if I asked them to drill another one out for me would tht be better and I'm not really sure what size mm the airhole is now I forgot to ask them and don't have anything to measure it with
- Status
Similar threads
