Any US vendor to sell Ego T passthrough battery at cheap price?

[kinhvanhoa]

Well,...My ego T passthrough 900mAh batteries were dropped and dead today.
The switches were damaged and they didn't function at all.

Since my VAMO is on the way, I just want to invest small money on a couple of Ego T passthough batteries.

Does anyone recommend a vendor to shop?

Yes...we always need some backup devices....Thanks in advance.

 

[Kent C]

Electronic Cigarette - Pass-throughs - eGo Pass-Through

Click on the 20% off, top left.

Joye ego-C Upgrade Pass-thru, Joyetech Upgrade Pass Through, Joye ego-C

"ecf"

http://mikeusa.com/JOYE_EGO_T_PASSTHROUGH_BLACK__650MAH-details.aspx

It's a 650 but if you don't take it off the charger, 650's are good as any.

 

[kinhvanhoa]

Electronic Cigarette - Pass-throughs - eGo Pass-Through

Click on the 20% off, top left.

Joye ego-C Upgrade Pass-thru, Joyetech Upgrade Pass Through, Joye ego-C

"ecf"

http://mikeusa.com/JOYE_EGO_T_PASSTHROUGH_BLACK__650MAH-details.aspx

It's a 650 but if you don't take it off the charger, 650's are good as any.

Thanks for the reply. Well, is that a VV passthrough battery? The last ones I used was Ego type VV passthrough ones.
So, I prefer to have one as a backup.

 

[Vash]

Go with the ego C .Great replacement for the ego T.

 

[Kent C]

Thanks for the reply. Well, is that a VV passthrough battery? The last ones I used was Ego type VV passthrough ones.
So, I prefer to have one as a backup.

The Joye eGo-c 'upgrade' passthrough has two modes - one is a constant voltage mode where the voltage stays constant throughout the charge and the other mode is a variable mode but not true VV in the way you can dial a voltage such as the Twist. The Twist doesn't come as a passthrough since the circuits and controller is in the end of the batt. Even the Vision Spinners - also true VV don't have passthroughs. There may be other clones that have VV and passthrough but I'm not aware of any other than mod types.

 

[kinhvanhoa]

The Joye eGo-c 'upgrade' passthrough has two modes - one is a constant voltage mode where the voltage stays constant throughout the charge and the other mode is a variable mode but not true VV in the way you can dial a voltage such as the Twist. The Twist doesn't come as a passthrough since the circuits and controller is in the end of the batt. Even the Vision Spinners - also true VV don't have passthroughs. There may be other clones that have VV and passthrough but I'm not aware of any other than mod types.

Thanks for the quick reply. It's really helpful.

The previous ones I had seem to be this : V.V. Passthrough USB

It has three different voltage modes (3.2V 3.7V and 4.2V by clicking the button 5 times).
If I don't find a similar one, I would go with EGO C upgrade then.

 

[Vash]

KGO V.V. 650mAh These work well, My wife still uses one .

 

[Kent C]

Thanks for the quick reply. It's really helpful.

The previous ones I had seem to be this : V.V. Passthrough USB

It has three different voltage modes (3.2V 3.7V and 4.2V by clicking the button 5 times).
If I don't find a similar one, I would go with EGO C upgrade then.

I had seen the 3.2, 3.7, 4.2 mode ones but not the true VV like a Twist or V.Spinner. I even have one of those mini PT's that can go to 4.8 but it is PT only - you can't disconnect. Works great though... The joye eGo-c has the best charge and short protection and I don't worry about having it hooked up all time. On non-pt batts, I still take them off the charger if I'm leaving the house.

 

[Vash]

I agree with kent .Most of the time I dont go above 4.2v so with two ego c batts charged and paired with LR juice delivery systems you should be good to go

 

[Vash]

Hey Kent we should talk to Joye and get some freebies for all this EGO C promotion LOL

 

[Schnarph]

Ego-T 2 upgrade passthrough ?

 

[Kent C]

Hey Kent we should talk to Joye and get some freebies for all this EGO C promotion LOL

If others would include the short/charge protection and the quality build at a lower cost, I'd buy them. I know not everyone has had the same experience/luck but one thing I like about Joye is their threading. I've never had to pry up a center post on either the batts or attys to make them fire and have never had the mismatch in threading as I have with Rivas or other clones. I missed the first run of early eGo's so I never had the button sticking and hangup that the early Joyes had, which they fixed rather quickly.

But yeah....