Anybody refilled their cartomizer with VG

[SEB]

I don't know much about VG,

I seem some doing it DIY, 50%vg/50%PG, 20/80%, 90/10%

Anyone tried to put any type of VG mixture in their cartomizers and had success?

Thanks

 

[pianoguy]

I bought some juice that is a 50/50 mix, and filled a blank carto - worked great!

 

[cos]

i filled up some carts with 50 50 pg and vg and it worked fine. also used straight vg on some carts tobacco flavor 26mg and vaped great. I usually use the 50 50 mix now cause i heard you get a better TH with PG so i do now pg vg combined

 

[SNM]

I have used VG and it worked fine

 

[CDC700]

I haven't noticed any difference, VG worked fine (undiluted) in my carts too...

 

[Overlord]

weird, i've had zero luck with VG in carts. Doesn't seem to wick very well but that could be the 808 carts im using.

 

[Taryn]

We are talking cartomizers here, combination carts and atomizers so I'm sure they work a bit differently.

 

[Overlord]

We are talking cartomizers here, combination carts and atomizers so I'm sure they work a bit differently.

Just to clarify, i was referring to KR808D cartomizers I always use VG juice in my 510 carts.

 

[beckah54]

I have used VG liquid in my cartomizers with no problems.

 

[Taryn]

Just to clarify, i was referring to KR808D cartomizers I always use VG juice in my 510 carts.

I confuse easily sometimes

 

[namuch]

I mix in 20-25%, straight VG, or ECOPure rich to all my refills. Mostly because I vape strictly at 5v and/or 6v. This seems to keep the Kr808 carts tasting nice without degrading (aerosol) the flavor at higher voltages..

 

[arkangel]

I've used pure VG and VG/PG mixes when refilling my cartos--both work great!
The VG is definitely thicker and really benefits from Taryn's "spinning method" after refilling to get it really absorbed all the way through the filler.

 

[Zofryer]

I cut dunhill 24mg double flavor from My Freedom Smokes 50/50 with wiltons. Works like a charm in both Greencig and KR's.

 

[Soon to be E]

I thin VG with 10% distilled water so it runs easier... Some VG is really very thick...

 

[SEB]

I guess I'l have to try to mix some VG.... I have a V4L bulk order stuck in custom for a week and I'm running out of juice and cartoz, So I bought a some juice from a canadian vendor and the juice has too much flavour and there is not much vapor, I think I'll try to mix it with VG!

Thanks

 

[DaShiVa]

I've refilled my empty cognac with pure walmart humunco VG with a few drops of orange flavour (also from wally world) and it produced more vapor than anythig else i've used (and tasted fine - not nearly as good as the orange juice V4L sells, which is fantastic, but the orange essence flavour came through perfectly)

Also revently have mixed vg with some of the no-flavour juice from v4l to lower the mg down, about 50/50 and added some loranns butterscotch, which i put in some empties, and that's really tasty also, vapes no worries.

 

[JohnnyVapor]

I thin VG with 10% distilled water so it runs easier... Some VG is really very thick...

Soon to be E brings up a good point. I would suggest cutting your VG before mixing with a little bit of distilled water or a bit of grain alcohol. I found the straight VG way too thick to wick well.

 

[SNM]

VG is in my cartomizer right now. No problems at all.

 

[scott58]

weird, i've had zero luck with VG in carts. Doesn't seem to wick very well but that could be the 808 carts im using.

5 to 10% vodka should solve that. It will thin it out enough for proper wicking.

 

[dreamwalker]

whats the diff between pg and vg?