Anybody Using A Kabuki?

[AstroTurf]

Oh kool. That's right next door to............

Petticoat Gumption.

I remember that show...

Now, as I look back and think about it...

I bet they had some Mighty Fine Tastin Water!!!

w00 h00, Chuga Chuga!!!

 

[GeekyGeezer]

Since I missed the info on the Kabuki V2 until it was posted here (where did that page come from?) I'm not surprised I've heard nothing further.

I know that Mike has little time for online stuff right now, but has anyone heard any updates?

 

[HBcorpse]

Since I missed the info on the Kabuki V2 until it was posted here (where did that page come from?) I'm not surprised I've heard nothing further.

I know that Mike has little time for online stuff right now, but has anyone heard any updates?

It's literally just a titanium model.

 

[tearose50]

I haven't seen anything else about what products Zen is working on besides the Kabuki Ti, but I imagine he'll be showing it off at VapeFest, Vegas next weekend. I have seen some post about a top fill model, but I don't have a clue where that info is coming from.

 

[GeekyGeezer]

It's literally just a titanium model.

Maybe I'm hallucinating again, but I thought I remembered someone posting an imgur ad-like page describing a Kabuki that basically had the new P3-510 adapter built in, came with both quartz and plexi tanks, and accepted Triton Mini coils. If you look around, you'll see a lot of dealers having no stock at all on the 510 model. I figured the V2 (my terms) would be the standard Kabuki going forward.

Come to think of it I guess it could be a simple P3 repackaging including the adapter and extra tanks. But somehow I remember the base being different than any current model.

 

[HBcorpse]

Maybe I'm hallucinating again, but I thought I remembered someone posting an imgur ad-like page describing a Kabuki that basically had the new P3-510 adapter built in, came with both quartz and plexi tanks, and accepted Triton Mini coils. If you look around, you'll see a lot of dealers having no stock at all on the 510 model. I figured the V2 (my terms) would be the standard Kabuki going forward.

Come to think of it I guess it could be a simple P3 repackaging including the adapter and extra tanks. But somehow I remember the base being different than any current model.

You are correct!

Zen has stated he will not be making a 510 Kabuki any longer...and possibly no 510 device ever again in the future.

To the best of my knowledge, the TI Kabuki will come in Z2 and P3 threading only. The P3 will be assembled with an SS P3>510 adapter, and packaged with extra tanks.

As far as Triton coil compatibility, the P3 model already accepts them. The authentic 510 Kabuki will take them too, but many people have found they need to replace the Triton pin with a Nautilus pin, in order to make it work.

 

[tearose50]

Here's what I know. The attachment is a post HOH made at Zenfidels.

To be released within weeks.....

View attachment 530267

 

[GeekyGeezer]

You are correct!

Zen has stated he will not be making a 510 Kabuki any longer...and possibly no 510 device ever again in the future.

To the best of my knowledge, the TI Kabuki will come in Z2 and P3 threading only. The P3 will be assembled with an SS P3>510 adapter, and packaged with extra tanks.

As far as Triton coil compatibility, the P3 model already accepts them. The authentic 510 Kabuki will take them too, but many people have found they need to replace the Triton pin with a Nautilus pin, in order to make it work.

Here's what I know. The attachment is a post HOH made at Zenfidels.

Thank you both! I guess I missed/forgot the fact that the attachment was not about the stainless Kabuki.

What is Zenfidels?

 

[Mike Geaney]

You are correct!

Zen has stated he will not be making a 510 Kabuki any longer...and possibly no 510 device ever again in the future.
.

Oh boy. Now I have to fire up the debit card to get a back up 510...just in case.

 

[HBcorpse]

Oh boy. Now I have to fire up the debit card to get a back up 510...just in case.

Just make sure you get an authentic...because the 510 is the only Kabuki to have been cloned.

 

[MsLoud]

Just make sure you get an authentic...because the 510 is the only Kabuki to have been cloned.

One way to tell is the HoH authentic has the hex screw for the 510 and the clone is a flat head.

 

[Qew]

One way to tell is the HoH authentic has the hex screw for the 510 and the clone is a flat head.

I saw a clone that has a hex screw so you can't count on that.

 

[Mike Geaney]

Thanks. Mt. Baker Vapor has got the legit ones.

 

[ENAUD]

I saw a clone that has a hex screw so you can't count on that.

Anyone with a bit of shadiness could change out the screw in no time. If I buy any more they will be P3 native threading, Zen has a pretty fair price on them 510 adaptors.

P.S. I was thinking about used when I wrote this.

 

[MsLoud]

Hrm, guess I'm not that low-down so I wouldn't have thought of that. Good point. Clone that are out there though do not come with the hex screw.

 

[Qew]

No, seriously, there is one for sale with the hex screw. I'm not going to post a link, but you guys know the site, it's the one with a blue stand.

 

[MsLoud]

Ahh interesting...

 

[ENAUD]

No, seriously, there is one for sale with the hex screw. I'm not going to post a link, but you guys know the site, it's the one with a blue stand.

Sometimes folks who sell counterfeits also used stolen images from the genuine sites. I'm not saying this is the case, but I have seen it.

 

[JD53]

FYI, I got the P3/510 adapter and Kabuki to fit together flush. The threads on my adapter are not cut deep enough to allow the tanks to screw in far enough for a flush fit. I put a taper on the Kabuki's final thread and it fits tightly. It now sits on a 2.5 with a Svoemesto trim ring and all is good in the world. Pretty easy fix. The Kabuki starts to thread into other P3 connectors easier too.

 

[bakke85]

At the moment there is a flash sale on gearbest, 5 authentic 1.8 nautilus coils for 7,95 $